I recently updated my Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

I recently updated my 20-inch, Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

Can you see them in Disk Utility?
If so, can you select and Mount them?
If not, disconnect them, reset the iMac's SMC and then reconnect them.
Intel-based Macs: Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
If you still can not see them, connect them back up to the iMac running the older OS, open Disk Utility and look to see how they are partitioned and formatted.

Similar Messages

  • With the new i tunes donwload I now have many songs that will not play

    with the new i tunes donwload I now have many songs that will not play

    You have to use the same old Apple ID and password.
    NOTE: All content bought using one Apple ID cannot be merged or transferred to another Apple ID.

  • My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

    My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

    Invalid sibling link may not be fixable by Disk Utility. (Disk Utility is very conservative, and will not attempt repairs that might cause you to lose data.)
    It is an indication of serious Directory damage.
    that leaves
    a) third-party Utilities that will take those risks, or
    b) re-initializing the drive (which deletes all your data) and restoring from another backup source.
    c) "Copying off whatever files you can salvage" has gone by, and you cannot copy anything off a drive that will not mount. You may be able to use "rescue" programs such as prosoft engineering Data Rescue to copy files to another drive, but that sounds a lot better than its reality. You may get many files, but not get ANY filenames.

  • My Lacie external hard drive will not back up on Time Machine. Says there's not enough space. This has happened with every single external I've purchased. Thought TM was supposed to delete old backups??

    My Lacie External backed up on Time Machine after the first back up but now says there's not enough room. I thought TM deleted old back ups to save new versions. What am I doing wrong. This happens to me constantly. Every single external hard drive I've purchased for the MacBook Pro (5 of them) has not worked either initially or at the second back up. It either isn't formatted properly so I have to go to Genius bar to help me set up for the first back up, or after the first back up, it says there's not enough space and I have to go back to Genius Bar. Is there a way I can fix this on my own?

    I just purchased 2 external hardrives. a LaCie Minimus and a G Drive. Each 1 TB. The guy at Apple told me that would provide 2 good TM backups for me. My internal HD has 750 GB capacity, of which I'm using 700 GB. Perhaps the ratio is not great enough. I do wish they would have told me this before I purchased the two Bummmmer! I even had them format and get the first back-ups going because of issues I've had in the past. I also just bought a 750 GB for photos.
    So, I won't be able to buy another bigger external since I've just purchased 3. Ugh. Well, I'll just exclude some files and divide things up. Eventually, I just want my 20,000 iphotos on one of the 1TB externals, and a TM back-up on another so that iphoto will function once more. It really hates how many photos I have and is brutally punishing me for it.I seriously need to do some housecleaning!
    Thanks for the advice. Just moved from US to Australia last week and was hoping to upload a few photos and the domino effect has lead me to this. Just went to Genius Bar in Perth today and they told me how to reformat drive to transfer iphoto library over, but I got stuck at trying to back-up my TM.

  • Problems with External Hard drive, will not mount and errors in disk utilit

    i have a powerbook g4 aluminum. i have an external hard drive for it. a simple tech 100gig portable drive, almost brand new. i dont know what happened to it, but one day i was starting my computer up with it attached. it wounldnt fully start up, said "waiting for local disks" so i uplugged the external hard drive. now it wont mount and will only show up in the disk utility of my friends macbook. i tried to verify and repair, and this is the message i got.
    Verify and Repair disk “UNTITLED”
    ** /dev/disk1s1
    could not read boot block (Input/output error)
    Error: The underlying task reported failure on exit
    1 non HFS volume checked
    1 volume could not be repaired because of an error
    Im in mexico writing a book and so i really need help on this one guys.

    Hi, hjbugs, and welcome to Apple Discussions. Disconnecting the drive while your Powerbook was accessing it probably caused your problem. It may be repairable using DiskWarrior or TechTool Pro, but if you don't have access to one of those and aren't going to buy one, reformatting the drive with Disk Utility may be the only other way to make it usable again. If it contains data you need to recover first (i.e., data that isn't also stored on your internal HD or other storage media), download the free demo version of one of the data recovery utilities mentioned in this thread and use it to see what is recoverable. If the files you need are recoverable, buy the full version of one of the utilities and recover them.

  • External Hard drive will not mount on Macbook Air (mid-2011) OSX 10.9.4

    Hello Everyone!
    Needs some help resolving this issue.  External hard drive (Toshiba v63600-C) will not mount anymore on my mothers-in-law's macbook air.  She notice this problem starting on the Aug 6th.  You can see it in the Disk Utility but is not mounted.  I can get the her ext hard drive to mount on my Macbook Pro with no problem.  I also tried my personal ext hard drive (Seagate) on her Macbook Air and it will not mount.  Not sure what is going on here.  Any help is appreciated in resolving this issue.
    Disk Utility
      Mount Point : Not mounted  Capacity : 1 TB (1,000,096,367,104 Bytes)
      Format : Windows NT Filesystem (Tuxera NTFS)  Available : -
      Owners Enabled : -  Used : -
      Number of Folders : -  Number of Files : -
    Actions Taken So Far:
    1) Confirmed "external disk" is selected under Finder's Preference
    2) Reset PRAM
    3) Ran Verify Disk and Repair Disk under Disk Utility with no change.
    4) Tried manually mounting disk in Disk Utility but get "Mount Failed" error

    You may believe this is Apple's problem but I just like Baltwo have had absolutely no problems with any of my Firewire drives in Lion. So unless you can come up with much stronger evidence to the contrary, I doubt that your feeling are going to carry any weight at all.
    Allan

  • IMac external hard drive will not show up on desktop

    I have an external 60 GB hard drive that is attached to an IMac.
    I used to be to access this hard drive, but now the IMac will not see it and it does not appear on the desktop anymore. I have another Mac computer and have hooked this hard drive up to it, and it shows up just fine on this other computer's desktop, so I know the hard drive should be working.
    What should I try doing to get this hard drive show up on the IMac?

    Is the drive connected via USB or Firewire?
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    What to do if your computer won't recognize a FireWire device
    http://docs.info.apple.com/article.html?artnum=88338
    Dealing with FireWire problems (drives not mounting, devices unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20041221081432908
    Common fixes for USB device issues (unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20070824012114701
     Cheers, Tom

  • My external hard drive will not mount with my mac?

    Okay so everything was working out great till the new OS came out. Then i ran into some problems. I can no longer back up anything i have on my laptop anymore because my external will not pick up in finder-desktop-etc. I need help as fast as i can because i need to back up, its been 50 days and my computer is filled with pricless photos and videos that i would like to save.
    Please help!!!!

    No it does not, sorry that this responds took so long

  • Time Machine - External Hard Drive will not unlock

    Laptop: Macbook, OSX 10.7.5, 2.4 GHz Intel Core 2 Duo, 8 GB RAM
    External: 320 GB, Seagate Free Agent Pro - 9KV2AA-502
    I just bought this external a few weeks back and ran TimeMachine. Backed up my computer about 5 times since the purchase. I decided to encrypt my backups and set up a password.
    If you try a bad password, you can try again, over and over, but once the correct password is entered, the drive does not unlock and the password window remains greyed out.
    The drive does show up on disk utility but the partition is also greyed out.
    Any hints as to accessing the drive? I do not mind reformatting the drive since it is primarily used for backing up my system.
    Thanks!

    info from disk utility:
      Disk Description : Seagate FreeAgent Go Media  Total Capacity : 320.07 GB (320,072,932,864 Bytes)
      Connection Bus : USB  Write Status : Read/Write
      Connection Type : External  S.M.A.R.T. Status : Not Supported
      USB Serial Number : 2GE70TLK  Partition Map Scheme : GUID Partition Table

  • I was running out of hard drive space so I uninstalled Adobe Premiere Elements 13 with the intention of re-downloading it on my external hard drive. But now I have less space on my hard drive, and I can't find it on my external.

    Can anyone help me?

    If you moved your iTunes library by simply copying it to another drive, you may not be able to access your music even if you reconnect to that library, you may get a lot of "not found" errors because the music is not where the library thinks it should be. First thing to do is put it back where it was.  Then reconnect it. Then follow the steps in this link:
    http://support.apple.com/kb/HT1364

  • Touch ID working less and less - why is there no fix for this?

    The recent IOS update did nothing to improve the touch-ID problems that had started about a couple of months ago.
    Often my phone cannot identify me even in three attempts - on other occasions it works quickly the first time.
    During the first couple of months I never had once a problem with logging in.
    But now it is constantly happening, about every other time.
    Is this sensor degrading to quickly, or is this a software problem?
    I can't even go to the Apple store with it, because sometimes it just works for several times in a row.
    I have heard that people have this problem with brand new phones.
    So is it a botched IOS update that messed up touch-ID?

    I Some time get that but for me it's some water on the scanner or my finger so clean both then try

  • My iPod touch 4th generation won't turn on and when I plug it in to charge, it gets really hot. Is there a fix for this?

    More information: The iPod ran out of battery late thursday night and I plugged it in to charge. The charging symbol appeared but within 20 minutes, the ipod had gotten very hot and had gained no charge. It hasn't been dropped and it hasn't gotten wet. It's a year and a half old. I use an otterbox as a case, but this problem began three days ago, despite my having been using the brand of case for over a year. It's super important that I find a way to fix this. Help please?

    Try the remaining items of:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The Hotness usually indicates a hardware problem
    Apple Retail Store - Genius Bar                                     

  • I have an I Pad 1 with 64 gigs. It constantly drops me off the Internet for no apparent reason. Is there any fix for this problem?

    My I Pad 1 constantly drops me off the Internet and programs. Is there any fix for this problem?  It started after the last update and continues to get worse.
    Doug

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • How do I clean my mid 2007 iMac? The disk space is running VERY low and I would love an idea. I make videos and upload them to youtube and I need space to do that. Thanks for your time!

    How do I clean my mid 2007 iMac?
         The disk space is running VERY low and I would love an idea. I make videos and upload them to youtube and I need space to do that. Thanks for your time!                              
                                       If you have an idea please respond!

    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your iMac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Look though other Apple Mail folders like the junk mail and delete the mail that is in there. Look through your sent items folders and see there is any mail in there that can be deieted.
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Other things you can do to gain space.
    Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
    This app will help you locate files that you can move/archive and/or delete from your system.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • Can I install Mountain Lion 64-bit over top of 32-bit version installed by mistake.  M/c is 24-inch mid 2007 iMac with Intel Core 2 Duo (64-bit?)

    Can I install Mountain Lion 64-bit over top of 32-bit version installed by mistake.  Machine is 24-inch mid 2007 iMac with Intel Core 2 Duo (64-bit?)

    Welcome to Apple Support Communities
    Mountain Lion is a full 64-bit operating system. Why do you think Mountain Lion is 32-bit in your computer?
    To check that you are definitely using a 64-bit operating system, open Terminal (in /Applications/Utilities) and type:
    uname -a
    Then, tell us what you see at the end after RELEASE. If you see i386, you are running a 32-bit operating system. If you see x86_64, you are using a 64-bit operating system. Also, the processor of your Mac is 64-bit

Maybe you are looking for

  • How to generate a pwm whose duty cycle has to be varied depending on the frequency of the input trigger??

    Sir/madam, I am quite new to the Labview FPGA module.  I am currently working on an application where i have to generate a pwm to control the ON time duration . The pwm ON time depends on the frequency of an input signal.I want to retrieve the ON tim

  • How do I create a title effect in CS3?

    Hey guys First post here I was just wondering how would I make the same title effect used in this video at 38 seconds where it says TERRY TATE http://www.youtube.com/watch?v=RzToNo7A-94 I'm a big Premiere Pro noob, so please make answers understandab

  • Can i or can i not print a 6.75 x 4.75 envelope on my officejet pro 8600

    quick and simple can i or not print a 6.75 by 4.75(or any custom size not listed) envelope on my officejet pro 8600

  • Query Form

    Hi, I am an inexperienced forms developer ...I have created a basic userid/password form in 6i. since this form should be a query only form to validate the userid/password ...it should not insert/update/delete data from the database. my requirments a

  • SAP BI course

    hello, i am planning to pursue a course in SAP BI. i have read in many articles that for BI, one should have good knowledge about sql, abap and java. though i dont have prior knowledge of SAP ABAP or data warehousing, i do have hands on experience of