I recently upgraded some Adobe software (and I can't remember which one) and since that time, I have not been able to get videos on Firefox. I still can on Safari. What gives?
I'm sorry I can't remember which software I was requested to update....but it was an Adobe product. Now, Firefox is a little slow and fluky and I can't get videos at all. Sometimes, I can't google--it freezes, but intermittently.
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao.
Similar Messages
-
Since upgrading my 4S today i have been able to make 1 complete call and nothing else. I took my phone to an AT&T dealership only to find out they could not help me at all that I needed to contact AT&T directly regarding the iphone upgrade. The gentlemen Dwayne Walker did a soft reset and it did not work. The phone goes on for 30 seconds and shuts down to black screen with apple in middle. I have tried everything i know and i wish i never upgraded to 7.0.2 software becuase now i have no phone and i my sister and her daugther are both in hospital and i am the emergency contact with no phone
You need to contact Apple by phone. It should be a free call since it is caused by the upgrade. They will walk you through the fix.
It may take quite a while.
I too am having 7.0.2 issues. My battery life is now 4-5 hrs TOPS an it's the IOS problem. Apparently I am not alone. I have an appt tomorrow to further troubleshoot. So right now I'm staying plugged in at all times. I have an Iphone 5.
I had a similar problem to yours when I upgraded my iPhone 4 to IOS6. They worked it out for me.
Marie -
Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access
Which version of Firefox are you using?
See
* https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can -
I have tried to find the page where I can click on the Firefox button and get to the "Set Up Sync" page. I have tried every Firefox home page and web page I can find and there is no button that gets me to the "Set Up Sync" page. Please help me. I just want to set up the Sync page on a number of computers I own.
Have you read these support articles? <br />
https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync <br />
https://support.mozilla.org/en-US/kb/add-a-device-to-firefox-sync -
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
My hard drive recently crashed and I had to have a new one installed, at the same time I upgraded to Yosemite since then I have not been able to get on my banks website to do any online banking. I just get a blank page after I log onto the bank. Any suggestions on how to fix this?
Using Safari? Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. Then try Safari/History/Show History and delete all history items. Quit/reopen Safari and test. You can also try try Safari/Clear History and Web Site Data. The down side is it clears all cookies.Doing this may cause some sites to no longer recognize your computer as one that has visited the web site.
Try another browser as a test.
Firefox -
Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to rectify the situation. Someone please guide me through this! Thanks in advance!
Did this ever get resolved, as I am having the same issue. Trying to learn LR5 AFTER a decade using Aperture. I was able to set up a validated account but when I try to send an e-mail or photo I get the simple " Failed to Send " message. Using latest version of Mac OS X.
-
After the lastest update on iTunes I have not been able to get into the program. I have uninstalled all components and reinstalled and now it is telling me I am missing .dll files. I am so frustrated. I probably lost my entire library except what I purchased
Your library should be safe.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I have not been able to get or send email with my embarqmail account. I have been told to put host as pop.centurylink.net and and stmpcenturylink.net and server port 587. If anyone can help me please let me know. Thx
Try here:
iTunes Store: My credit card's security code or zip code does not match my bank's records
Then try contacting iTunes
Apple - Support - iTunes - Contact Us -
Hi!
I purchased my AppleTV in Miami, but I live in Argentina.
I have not been able to get my device running correctly, and altough I've read tons of things online, I still have no solution to my problem.
Here's the thing: after everything's plugged in and ON, I see the Apple logo briefly, then the TV displays a sign that says no signal, check pwoer cords and power source.
But everything is plugged in and connected properly, otherwise, I doubt I'd be seeing the apple logo, right?
I tried changing the HDMI cable, reversing the ends, switching ports, hard resetting the ATV, and trying a different TV. No luck.
I read there is some issue with Samsung TVs, and most LED and LCD tvs down here are Samsung.
On the other hand, I cannot return it or exchange it, since I bought it in the states.
Oh! One of the tvs I tried it on displays a little sign that reads "connected at 1280x720 @60hz", and only THEN, goes to the "no signal" sign.
Please!!! I am being driven up the walls here.... HELP!!Try this:
Change the Apple TV resolution:
Press and hold the Menu and Up button on your Apple Remote for six seconds.
The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals.
Press Play on the Apple Remote to keep the current resolution or Select to manually cycle to the next resolution. -
I have set up iTunes and iCloud with my computer and my iPhone 4S but have not been able to determine whether contacts on Microsoft Office Outlook can be transferred from the pc computer to the phone. Is transfer possible using iTunes or iCloud or other method to transfer the contacts. If so, what are the steps for making the transfer successful.
ETGamboaThank you Thank you!! Quickest response EVER on a help community!! Awesome!!
-
I just downloaded and installed elements 12 on my Windows 8 (yuck) notebook computer. When I log into Elements the program closes. I have not been able to get it to run. Any ideas?
Try a SMC reset:
http://support.apple.com/kb/ht3964
Ciao. -
I have been using Itunes on my HP laptop for 12 months and over the past month have not been able to access the Itunes store or any of the Itunes Help type menu's. When in Itunes I click on the Store icon and the top middle box gets to Half way. Pls help
I had the same tried loads of fixes
saw this on the community from whatheck
In windows 7 click on your start menu, go to the accessories, right click on the command icon and choose "run as administrator"
Once it opens type the following command...
netsh winsock reset
Hit enter and it should say something like winsock reset successful now reboot your computer
IT WORKED....... cleared all the "action2 on the CPU and loads IStore perfectly -
I have not been able to get the built-in iPhone 4S keyboard dictation to work. I talk into it, then tap "Done", then the phone "thinks" for a few seconds (the purple dots pulse and I see the network icon on the top bar spinning) and then nothing happens.
Siri is wroking fineI am experiencing exactly the same problem, today, and a reset, of all settings, did nothing to correct it. Any suggestions would be welcome. While dictation in all apps is out, Siri is working fine also.
-
I have a LG Lucid phone and after the recent LG software update, I have not been able to import my Outlook mail. Anyone else with this problem?
Connecting through email is extremely important these days donhinson. Let's get this fixed today. I first recommend removing the email account and readding it back to your device.This will help reset the settings. Listed below are steps to check the email settings, outgoing, and incoming servings.
1.From a home screen, select Apps (located in the lower-right).
2. Select Email.
3. From an Inbox, select Menu ( located below the display).
4.Select Account settings.
5.Select Account display name.
6.Enter an name then select OK.
7.Select My name.
8.Enter the name then select OK.
9.Select Signature.
10.Select the desired signature.
--To add a custom signature, select New signature (plus ( ) symbol located in the upper-right), enter the signature then 11. select Save.
12.Select Retrieve interval.
13.Select one of the following:
--Manual
--5 minutes
--10 minutes
--15 minutes
--30 minutes
--1 hour
--2 hours
--4 hours
--8 hours
14.Select Maximum emails to show.
15.Select one of the following:
--20 messages
--40 messages
--60 messages
--80 messages
--100 messages
--200 messages
--500 messages
--1000 messages
16.Select Delete from server.
17.Select one of the following:
--Never
--When I download from server
--When I delete from device
18. Configure the following as appropriate:
-- Enabled when a check mark is present.
--Forward message
--Forward attachment
19. Select Change login settings.
19. Ensure the following settings are correct then select Save:
--Username
--Password
--Email address
--INCOMING SERVER SETTINGS
--POP3 Server
--Secure type (e.g. Off, SSL, TLS)
--Port number
--APOP secure login
-- Enabled when a check mark is present.
--OUTGOING SERVER SETTINGS
--SMTP Server
--Secure type (e.g. Off, SSL, TLS)
--Port number
--Authentication. Enabled when a check mark is present.
--Username
--Password
I hope the information above is helpful.
KinquanaH_VZW
Maybe you are looking for
-
Read the title, that's basically it. It says it can't put the songs on my iPod because the computer isn't authorized, even though it is. The files are "protected" and have been like that since i bought the album. Any help? Thanks:)
-
Infoview Hyperlink Problem after stack upgrade
Good Morning, We are currently doing a stack upgrade of our sap systems and are in quality testing. BW - 7.01 - level 0008 Crystal - 12.3.2.753 BOBJ - fix pack 3.2 We are having trouble with hyperlinks in infoview. These hyperlinks are based on stand
-
I have a scenario where there are five subscribers and one publisher call manager.If subscriber A's connectivity to publisher breaks, utils network connectvity in sub A fails with publisher, can a phone registered with sub A make and receive inter an
-
Contribute can browse URL but cannot find it in Connection Wizard
Here is some supporting information: 1. I have a fully functional site on a development server that can be browsed via a standalone browser or via Contribute's internal browser. 2. I can successfully connect, browse, and ping the site using the domai
-
I am having trouble with the Hello World program in JDeveloper RUP7 setup. And I have searched these forums, but no threads describe this exact issue. When I run the Hello World, the first page appears fine, with all the links showing. However, when