I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?

The iPhoto library should be in your user folder/Pictures unless it was moved.

Similar Messages

I upgraded to Mavericks and now I get a LOT of the spinning colored disk when loading a program or almost anything.

I upgraded to Mavericks and now I get a LOT of the spinning colored disk when loading a program or almost anything?

For memory check out OWC http://eshop.macsales.com/, Crucial: http://www.crucial.com/ and Kingston http://www.kingston.com/us/. You will need to know your Mac the year and season your Mac was first sold and model number which can be found here:
 > About This Mac > More Info… > System Report > Model Identifier:

I have just upgraded to Maverick and now I cannot find certain files. These JPG's are there on my hard drives however . I rely heavily on the search facility and this is slowing me down.

I have just upgraded to Maverick and now I cannot find certain JPG 's . These files do exist however I can find them manually . I rely on the search facility and this is slowing me down, I am having to trawl through stuff to find the file I want , before I would put in part of the title and the machine would find it.

In addition to what Allen says, you may find these search tools helpful:
http://apps.tempel.org/FindAnyFile/
http://www.devontechnologies.com/products/freeware/ - EasyFind
http://www.osxbytes.com/ - iFileX (note the MacUpdate link provided on osxbytes page has a Malware advertisement forMacKeeper, do not download).
Note: you posted to the Classic operating system forum. That refers to Mac operating systems from 2005 and earlier in Classic mode, and Mac operating systems as boot systems on certain 2003 and earlier Macs. Mavericks forum questions normally get answered here:
OS X Mavericks

I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???

I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPHardwareDataType | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | grep -v 'ag$' | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`find -L {/,}L*/Lau* -type f -exec sh -c 'file -b "$1" | grep -qw XML' {} {} \; -print | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`find -L /{S*/,}L*/Star* -type f -exec sh -c 'file -b "$1" | egrep -q "XML|bin|exec"' {} {} \; -print`; Pm "StartupItems"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I upgraded to Mavericks and now in pages and numbers my files text cannot be seen

I upgraded to Mavericks and now in pages and numbers my files text cannot be seen unless you highlight it. I am using iWork 08. and running 10.9.4

These are the versions of iPhoto that are and are not compatible with Mavericks:
What version of iPhoto are you running? What happens when you try to launch iPhoto? Any message?
OT

I recently updated to Mavericks and now all my e-mail accounts won't send

I recently updated to Mavericks and now all my e-mail accounts won't send. They all receive ok but when I send I get a message "sender address rejected by server" and " Authentification required" The passwords are still intact

Check the Mail settings for your account, especially the SMTP (outgoing) address, type of authentication, and entry of the proper email username and password. You can do this when you select the account then under the outgoing mail server use the dropdown menu to select the Edit option. Select your outgoing configuration in the list. Check the settings below, then click on the Advanced tab and check those settings.
If all is OK, then I suggest your reinstall Mavericks:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.

Upgraded to maverick and now can't open excel projects

I recently upgraded to maverick and now can't go back to open excel spreadsheets I need for my business. I've even changed the permissions and I can only preview, not modify. Any suggestions?

Was just having this issue with my wife's computer after upgrading to Mavericks. Maybe a long shot, but if your filenames have forward slashes in them (such as for dates), change them to backslashes. No idea why but it works. I seem to recall having the same problem with Excel some time in the past and this was the solution then too.

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I also had problem accessing my WD MyBookLive after upgrading to Maverick.
To resolve the problem, I used Connect To Server (Cmd K) to specify the IP address.
Then I enter a user id and password I created in the MyBookLive.
You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
Just enter the MyBookLive IP address as the URL.

Upgraded to mavericks and now both email accounts have been merged into one

just upgraded to mavericks and now both mine and my husbands email accounts have been merged together rather than having separate inbox's. How do I separate them again?

Great question, I have a similar problem except that the photo library appears to take precidence over my organised folders so not all of my folders appear on my IP 5.
I eagerly await a solution,

I upgraded to Mavericks and now some of my utilities --- such as disk utility and system information no longer work.

I upgraded to Mavericks and now some of my utilities --- such as disk utility and system information no longer work. I find Disk Utility useful and would like to have it. Doesn't Makericks include

Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
If that doesn't work, I'd reinstall Mavericks over your current installation.

I updated Lion on OSX to Maverick OSX10.9.1 and now don't have Universal Access in Preferences only Access, Why? I need Universal Access to install Dragon Dictate, can you help?

I updated Lion on OSX to Maverick OSX10.9.1 and now don't have Universal Access in Preferences only Access, Why? I need Universal Access to install Dragon Dictate, can you help?

It was replaced by Accessibility in Mac OS X 10.8.
(95895)

Since I upgraded to Mavericks X, I don't have "permission" to open my photo files in Time Machine. Other documents seem to work fine.

Since I upgraded to Mavericks X, I don't have "permission" to open my photo files in Time Machine. Other documents seem to work fine, and I am the only "administrator".

Is the iPhoto library in your home folder, or have you moved it somewhere else?

I updated to lion and now don't have a minimize button in the new emails i am writing. Do i really have to save it as a draft to be able to have multiple emails in progress? Or am I missing something obvious?!

I updated to lion and now don't have a minimize button in the new emails i am writing. Do i really have to save it as a draft to be able to have multiple emails in progress? Or am I missing something obvious?!

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-and https://forums.adobe.com/thread/1572504
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

I recently deleted imovie 9 .and i don't have a cd and i have not made backup from time machine ..i want it back.plz help me..

i recently deleted imovie 9 .and i don't have a cd and i have not made backup from time machine ..i want it back.plz help me..

It depends how you installed it.
If you installed from your iLife 11 DVD, then you can insert the DVD and install it again.
If you purchased it from the Mac App Store, you can open the Mac App Store, go to the Purchases tab, and reinstall from there.

HT5787 Hallo , i don't remember the answer to my security questions and my apple ID is my old Email address whice not active any more and i don't have access to it

Hallo , i don't remember the answer to my security questions and my apple ID is my old Email address whice not active any more and i don't have access to it.
During the last year i was using my Iphone under this APPLE ID :***** , but i forgot to change it on "FIND MY IPHONE"
is there a solution for that??
Kind regards
yossi
<Email Edited By Host>

If you changed your Apple ID from the old email address (that is showing up) to a new one, but just forgot to update it on your iPhone, try these steps.
1. Use your current Apple ID password
Trying using your current Apple ID password. If that doesn't work, continue to the next step.
2. Sign out and back in to iMessage or FaceTime
If you are currently signed in to iMessage or FaceTime
Sign out of iMessage or FaceTime:
iMessage: Go to Settings > Messages > Send & Receive, tap your Apple ID, then tap Sign Out.
FaceTime: Go to Settings > FaceTime, tap your Apple ID, then tap Sign Out.
Sign back in to iMessage or FaceTime:
iMessage: Go to Settings > Messages, then tap "Use your Apple ID for iMessage".
FaceTime: Go to Settings > FaceTime, then tap "Use your Apple ID for FaceTime".
You should now be able to sign out of iCloud. You will still see your previous Apple ID when signing out.
If you are not signed in to iMessage or FaceTime
Sign in to iMessage or FaceTime:
iMessage: Go to Settings > Messages, then tap "Use your Apple ID for iMessage".
FaceTime: Go to Settings > FaceTime, then tap "Use your Apple ID for FaceTime".
You should now be able to sign out of iCloud. You will still see your previous Apple ID when signing out.
3. Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't work, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud and try to sign out.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Tap Settings > iCloud and sign in with the new Apple ID.

I recently upgraded to Mavericks and now don't have access to iphoto. I cannot find my iphoto library to back the photos up before upgrading the iphoto but see the photos when I try to change screensaver? Where are my photos so I can back them up?

Similar Messages

Maybe you are looking for