I removed Yahoo Search and in Tools Option I changed it to Blank Page at Startup but When I reboot my computer I get YAHOO as my StartUp page in Firefox even though Options still says Blank Page.

I added Yahoo Search when I installed a program, but later removed it from Firefox Add-ons, but it still comes up as my Firefox start Page even though Tools Options states that I want a Blank Start Page.
When I go to Tools Options and change nothing (since it still reads Blank Page) and press OK, the blank page works every time I load Firefox until I reboot my computer and then Firefox is back.

sounds like malware fallout
Have you recently installed any software infected with''' OpenCandy malwar'''e? If you saw any ads DURING installation you might have used malware
these fine people will help you identify-, and remove malware at ZERO COST
http://www.bleepingcomputer.com

Similar Messages

  • Tried to install maverick killed my hard drive. tried to replace hard drive and reinstall earlier version. but when i reboot the computer i just get a file folder with a question mark.  what can i do to get ky mac up and running?

    not sure of my opions. any ideas

    Restart holding down cmd-opt-r. It will boot to Internet Recovery. From there you can reinstall the original shipping OS or restore from Time Machine.
    http://support.apple.com/kb/ht4718

  • I uninstall plug-in but when I reboot computer it returns. How do I remove it permanently?

    I unistall an add-on but when I reboot my computer the addon returns. I wish to permantent uninstall this prgramme. I cannot remember loading this add-on as I have a full version of Nuance PDF Converter Professional 7 on my computer

    Hi humming --
    Just go up to the Mail menu above, click on "Window" and then select "Previous Recipients."  Then find the address that's bad, and remove it.

  • I recently had my account expire, and need to utilize the trial to finish a project. Even though my account says 'free trial' the applications will not open. How do I get the APP to recognize that I'm in trial and not expired?

    I recently had my account expire, and need to utilize the trial to finish a project. Even though my account says 'free trial' the applications will not open. How do I get the APP to recognize that I'm in trial and not expired?

    I had a year long CC membership that expired at the beginning of the October.
    After realizing that, I attempted to start a free trial of photoshop to work on a project. My Adobe account states that i'm on a trial, but my (Mac) dashboard CC app won't allow me to start the program. I have reinstalled both Creative Cloud and Photoshop CC but still get this message.

  • HT1711 I backed up my iphone5 in the morning and later again on the same day, in the afternoon. I then restored an older backup from the morning. Now all my music files refuse to play even though they still appear on iphone. How can I resolve this?

    I backed up my iphone5 in the morning and later again on the same day, in the afternoon. I then restored an older backup from the morning. Now all my music files refuse to play even though they still appear on iphone. How can I resolve this?

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • Why did Lion remove spotlight search from right click options?

    Why did Lion remove spotlight search from right click options?

    If by "contextual menu" you mean Right Clicking, then Yes, I now can highlight text (say a name in Address Book), right click it, and Spotlight searches for it.
    There is a little triangle next to the word Searching in Sys Pref; make sure it's pointing down and opens the sub-choices below it, i.e. Look up in Dictionary, Search with Google, and Spotlight.
    Let me know if this doesn't do it for you.
    Good luck.

  • I was working on a project in iMovie (10.0.1) and iMovie just crashed. when i reopened it the project i was working on disappeared. in my list of projects it still says i have 3 projects but its only showing me 2. is there any way i can recover my project

    i was working on a project in iMovie (10.0.1) and iMovie just crashed. when i reopened it the project i was working on disappeared. in my list of projects it still says i have 3 projects but its only showing me 2. is there any way i can recover my project?? PLEASE HELP!!!

    iMovie on your Mac  has nothing to do with iCloud storage.  Download and use Find Any File  to search for your iMovie project.  FAF can search areas that Spotlight can't, like invisible folders, packages and system folders.  If there a file with your file name on it anywhere on the hard drive FAF will find it.
    Do you have Time Machine enabled backing up to an external HD?  This situation is exactly what TM is good at.  It makes hourly backups so you can go back to find and restore the missing file.  All HDs crash at some time or another and having a good backup strategy is the only protection against that.

  • Alternate Search and Replace Tool

    I need to automatically search a piece of HTML code in
    hundreds of help topics. Unfortunately, since RoboHelp's
    "Multi-File Find and Replace" tool doesn't accept carriage returns,
    it won't accept the three-line string of HTML I need to replace.
    Can anyone suggest a (hopefully free) third-party
    search-and-replace tool that won't break RoboHelp in some way? I'm
    a bit worried because I'll be pasting a ton of conditional text
    markers.

    Hi, Adam,
    Two find-and-replace tools that are often mentioned in these
    forums are FAR and BK ReplaceEM. FAR is shareware, but free to use
    for the first two months; BK ReplaceEM is freeware.
    http://www.helpware.net/FAR/index.html
    http://www.snapfiles.com/get/bkreplace.html
    Pete

  • When in sleep mode iPhone 4 loses signal but when it's back on it searches and finds signal. Was 5.0.1. update to 5.1 but no changes

    When in sleep mode iPhone 4 loses signal but when it's back on it searches and finds signal. iOS was 5.0.1, update to 5.1 but no changes.
    Battery problem, anntena or motherboard? pleas help.

    it could be a motherboard problem. Last month I spilled liquid on to my iphone and since I didn't have warranty for it I had to take it to a "phone doctor". He fixed it but mentioned that motherboard is working fine but he can not say for sure for how long it will last, and that I may experience some wierd problems. I'm having this exact problem the day I got my iphone back.
    Well no longer but the solution still seems wierd. I turned on the "location services" because I saw in the "system services" screen that "cell network search" was turned on. I figured if I don't screw with location services, it would be okay. So, after three hours, I terminated the sleep in 10-20-30 minutes and 1 hour intervals, it seems I no longer have the problem but I'm going to sleep over it to be sure. Also make sure to turn on the "auto" option on the "carrier" menu.
    I will post the outcome if I don't forget about this page.

  • I have very slow internet even though my provider says the speed is fast

    I am experiencing very slow internet even though my provider says that my speed is fast.  The uploading of a page takes long to complete

    If Safari is getting very slow:
    (Presumably you regularly empty your Safari cache by deleting the following file:
    Home/Library/Caches/com.apple.Safari/cache.db
    and clear your History)
    Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
    http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
    and here:
    http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
    If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
    208.67.222.222
    208.67.220.220
    (You can also enter them if you click on Advanced and then DNS)
    Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
    http://support.apple.com/kb/TS2296
    If your computer is part of a network:please refer to this page: http://www.opendns.com/start/best_practices/#your_network and follow the advice given.
    If you use a Router, make sure it has the latest firmware installed.
    One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x as is described here:
    http://support.apple.com/kb/TS3408?viewlocale=en_US
    You can cancel DNS pre-fetching by going to Terminal and typing:
    defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
    You have to restart Safari for it to take effect.
    If Safari seems to hang for ages:
    If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
    Open the Terminal from the Utilities folder in /Applications and type
    killall -9 WebKitPluginHost
    Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
    Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The later versions of Flash 10.1 onwards appear to have improved the situation somewhat, but haven't completed eliminated it.
    For this and other reasons Apple switched their websites to HTML5 in January 2011:
    http://www.appleinsider.com/articles/11/01/26/apple_revamps_its_public_website_u sing_html5.html
    For Snow Leopard/Lion users this should also be read:
    http://support.apple.com/kb/TS3408

  • I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am now trying to add some presets to my  ACR but when I search for the folder to place them it is not there.  From what I researched it says it should be under camera l

    I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am now trying to add some presets to my  ACR but when I search for the folder to place them it is not there.  From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks

    Apple most likely has the same poor taste that Microsoft does when it come to defaults.  Microsoft likes to hide things like  settings, preset, folders etc from normal users  think the dumb or something else.  If Apple also hide things you will have to  make some system setting changes that will allow Finder to do it job and find it for you.

  • I have now transfered my files of ripped CD's to my iTunes library three times. On each occassion, the conversion seems to occur fine, the files play, but when I close my computer and return the next day, iTunes says it cannot locate any of those files.

    I have now transfered my files of ripped CD's to my iTunes library three times Since upgrading to iTunes 11 and Windows 8. On each occassion, the conversion seems to occur fine, the files play, but when I close my computer and return the next day, iTunes says it cannot locate any of those files. Three times. Beginning to lose my temper. Advice? Suggestions? Could the fact that my original library is located on a network drive have anything to do with it? Thanks for your help, all.

    Repair security permissions
    Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and system full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7/8 shouldn't be too different.
    Repeat for the media folder if it isn't a subfolder of the iTunes folder.
    tt2

  • My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me?

    My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me? My iphone and other macbook connect and work no problem. What steps can I take?

    Ok....
    Now go to your router's settings.  Not sure who makes your router...
    Look at wireless part of it and see how many computers are actually hooked up to it.
    Delete your computer from it (in your router).
    Restart your router.
    After your router has restarted, try to connect to it with your MB and see if you can browse the net.

  • None of my "paid" books will open in iBooks.  They show they are there, but when I open them all I get is a blank page.  I have checked all the newbie mistakes.  Mavericks will not let me uninstall and reinstall iBooks.

    All the books I paid money for will not open in iBooks on my MAC.  Mavericks will not let me uninstall iBooks, so I cannot uninstall and reinstall it on my Pro.  I have deleted and re-loaded the books and they show in my library (as they always did), but when I open them, all I get is a blank page with three dots at the bottom, flashing in sequence.  This does not affect the free books from the book store nor does it affect the PDF I have loaded myself.  (I had this problem on my iPad when the latest big software came out about a year or two ago, but I was able to re-initalize the complete iPad from my Pro Book.)  I have tried just about everything I can think of, but all to no avail.  To save time, I have reset my iTunes password and performed all the other "Apple Tips" in the support section, but after 5 hours I am giving up.  Surely someone else must be having the same issue??

    Yup, same issue since installing Mavericks.  iBooks works fine on my wife's Macbook Pro, but on my Mac Pro none of my purchased (protected) books will open - only the free/unprotected ones.
    I'm asked for my AppleID password, but nothing happens when I try to open a purchased and downloaded book.   I deauthorized, reauthorized, etc ... nothing.  Each purchased book that I double-click gives me a dialog asking for my Apple ID password.  Nothing else.
    I was already buying more books via Kindle than iTunes and this just seals the deal for me.  At least I can read my already-purchased iBooks books on my iPad still...

  • My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not workin

    My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Setting>:General>Reset>Reset Network Settings.
    - iOS: Troubleshooting Wi-Fi networks and connections

Maybe you are looking for

  • Retrieving sample basic using  Excel add in

    Hi I am having problems accessing the sample basic database using excel, I see the sample basic in Application/Database and I get an error which states that "Unable to load database[Basic]". I get this error for all the the sample databases. The syst

  • New unibody hard drive and ram

    When I purchased my new Mini the store information tag showed the hard drive as a 7200 rpm, that is one of the main reasons why I bought it. So, I unknowingly (Till today) have a 5400 rpm Mini and as of now, I'm a bit underwhelmed with the performanc

  • Can I use one GBIP-Interface with two programs at the same time?

    Hi, I have one PCI-GBIP-controller with multiple instruments installed. Now I want to use these instruments with two differents programs at the same time. E.g.: program 1 uses GPIB0::1 and GPIB0::3 and program 2 uses GPIB0::4 and GPIB0::7 Is this pos

  • PI 7.1 Adapter Level Logging documentation

    Hello, I am pretty new at PI 7.1. We are working on a logging documentation which requires us to layout how logging works in PI 7.1 both in ABAP and Java Stacks. Also, If possible could someone point me into right direction on logging documenatation

  • Why is the youtube app missing from iOS 6

    I recently upgraded to iOS 6 on my iPad & iPhone 4S. I noticed that the YouTube app is missing. Pls advise on why this is happening?