I reset my IPod touch because there were gray lines don the screen, and now the screen is flickering
I reset my IPod because there were gray lines down the screen, and now the screen is flickering, any ideas?
Try:
- Reset the iOS device. Nothing will be lost (not sure which reset you did)
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Similar Messages
-
Please help me!! I needed to reset my iPod touch because my pass code was changed and I didn't know what it was, but now iTunes wont let me restore it what do I do?
You'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set.... -
After a Installation from Windows 8.1/windows 7 everything works fine. For example Install updates and Software. If I connect the first time a remotefx card i can use RDP as well. But if i restart the host I get the mentioned error. What can I do. These
Hosts are not in a domain configuration. I tried it too but there was no difference. I didn't discovered any errors in the eventlog, too. Only an actviex error. But same errors occurs with a succsefull rdp session.
Also strange is if i start the vm without a remotefx card it works fine again. Only session with a Remotefx card aren't possible anymore.
Is there a bug or something. I tried it many times with the same error.
Maybe someone can help me.
kind regards
TobiHi Tobi,
Thank you for posting in Windows Server Forum.
For a workaround, please try to perform the two steps.
1. Do NOT enable RDP 8 on the Windows 7 SP1 VM. You should install RDP 8 and update the ICs though.
2. Change the connection setting on the client from "Automatically detect" to "LAN"
Please check again below thread for information.
a. "The remote session was disconnected
because there were network problems during the licensing protocol" after enabling RemoteFX Windows 8 VM
(Please recheck answer by “dgeddes”)
b. "The remote session
was disconnected because there were network problems during the licensing protocol" After Installing RemoteFX
Hope it helps!
Thanks,
Dharmesh -
I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. My pc didn't create a backup before updating software so I can't revert back to ios 4.3.5 from there, where can I download ios 4.3.5 from?
I tried just about everything and finally brought my Ipod touch to the apple store. The tech installed ios 4.3.5 but still no WIFI. He recommended a $149 exchange - not really a bad deal with a new battery and 90 day warranty, but I thought I'd try again.
The "solution" was bizarre. On YouTube was a fix involving taking the motherboard out and heating the wifi components with a heat gun.
I did not like that idea, but another involved turning it off, putting it in the freezer for five minutes and restarting. It worked! I must admit the fix does not work reliably, so I may still go for the exchange. Still, I am now convinced that it is a hardware problem. i remember back in the old days, TV repairmen sprayed a suspected bad resistor with Freon. The chilled component would work long enough to identify what needed replacement. Perhaps something similar is happening here.
For anyone wanting to try this, I found it more convenient to place the back of my ipod on a frozen cold pack until the wifi is restored. It seems to happen when condensation forms on the face. I used a towel to wipe off the moisture so as not to add to the problem. -
.
Try restting the iPOd. It cures many ills and nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
Were there apps in the App store before?
What country's store are you using? -
Please help! I was updating my iPod to 4.2.5 and iTunes said that it was preparing my iPod for update. Then an error popped up and now my computer won't recognize my iPod and it doesn't show up under devices in iTunes. All it has on my iPod is a picture of a USB cable with an arrow pointing to the iTunes logo. I tried resetting my iPod and it just restarts to the same picture. I tried restarting my computer as well.
What was the error number? That would be very useful since the following gives actions for various errors.
http://support.apple.com/kb/TS3694
Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes. See:
http://support.apple.com/kb/HT1808 -
My ipod is really beggining to irritate me,when i finally get apps sent to my ipod touch thay are still saying "waiting...."and now the apps picture on all of them is blank and i still HAVE YET TO DOWNLOAD ONE APP SUCCESSFULLY! What's going on with my ipod & how do i fix it?
Have you tried a hard reset of your iPod yet? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If that doesn't work, are you still connected to a network? Either way try connecting to a different one and downloading another FREE app to see if that helps.
B-rock -
My ipod touch will no longer sync apps since I downloaded the new Itunes. I have restored it to original setting in hopes that would work, but now I have lost all my apps and even old ones will no longer sync. Can anyone help?
What model iPod do you have? If yo have a 2G iPod. many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.
-
Brand new Ipod touch 2nd G has grey line near the bottom of the screen?
Does anybody know why my ipod touch has a grey line just below the last line of apps? Should I take it in? What should I do? I have already restored it.
How do I take it back? I bought it off amazon, will the apple store exchange it? Do I need to arrange somthing?
-
HT1212 how to reset your ipod touch
how to reset my ipod touch when wrong passcode results in red disabled screen?
Restore it. if you are unable to restore
iOS: Unable to update or restore
iPod touch User Guide (For iOS 5.1 Software) -
is there a way if apple can reset my ipod touch 2nd gen MC model back to 3.1.3? because iOS 4.2.1 is slow on my ipod and i cant deal with also i cannot afford a new ipod at the moment. also 3.1.3 was my default iOS when i first activated my ipod touch. I bought it in December in 2009
"You can restore to Factory Default which should go back to the original system"
This will not work..
A restore will always install the latest available software.
Again, there is NO legit way to go back at all. -
Is there any other way to reset my ipod touch? I am asking because my home button is broken.
If you mean this
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
then no
To place the iPod in recovery mode yo can use:
RecBoot: Easy Way to Put iPhone into Recovery Mode
for a PC
and
The Firmware Umbrella - TinyUmbrella
For a PC or MAC -
if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
and i hope you understand my problem..
i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
-sierraHey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.
-
would like to trace my ipod touch because I was robbed. I would find it please. need help from you guys. Not because I am able to get another. Thank you.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
Maybe you are looking for
-
Hi I am running oracle11g on enterprise linux 5 and everything seems to be ok. db and enterprise manager starts ok and works fine.I am just little confused when I check em startup logs that are full of errors and warnings. please see below. May I ign
-
Link in a DVD menu to link to text files such as Word, Adobe PDF's ect
Hello All Is there anyway to put a link in a DVD menu to link to text files such as Word, Adobe PDF's etc that are burned into the DVD? Hope someone can help me out.
-
Why do my mycloud makes up to 35 icons of the same movie in public movie libory on every streaming divices ?BRKnastaksel
-
LabView 2012 Continuous Measurement and Logging (DAQmx) Project
I've been working with this example to try to build a DAQmx and Serial acquisition message handling loops, as well as another message handling loop with two analog outputs for control. This control would also be based off of information from the DAQm
-
What if I purchase a new Apple computer with Lion pre-installed?
What if I purchase a new Apple computer with Lion pre-installed. Will I be able to somehow put Lion on a previously owned computer?