I restored my iphone and updated it but the progress didn't complete and now my iphone is not working. i need help asap.
my phone was not working only the restore button was available so i restored it and they told me i have to update my iphone 5s as well. i waited till the end the update software was downloaded successfully but then the iphone restarted by itself and now its not working. the iphone screen is shown the picture when you first time open the phone to connect it to an itunes. i connected it by it not working, i restart everything still not working:( i need help asap please. thankyou
it seems like apple's activation servers have gone down under the weight of the overwhelming amount of activation requests. you will be able to activate your phone once the servers are able to catch up with the activation requests.
Similar Messages
-
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .
Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob -
I recently ran monolingual and removed all but the intel-64 bit architectures. Now my iphoto (along with Idvd, garage band, imovie) will not open. Here is the message that I get.
Process: iPhoto [3543]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-4750000~1
Code Type: X86 (Native)
Parent Process: launchd [109]
Date/Time: 2011-06-10 21:48:59.821 -0500
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: -4164908 sec
Crashes Since Last Report: 8
Per-App Crashes Since Last Report: 11
Anonymous UUID: 45357CCD-011B-482E-A2EA-CF42096F1321
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST31000528ASQ, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x24300000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0901, 0x26400000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000Please let me know when you find a fix. I did the same thing and have tried every suggestion I can find online. The message I get is...
Process: iPhoto [4991]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-6070000~1
Code Type: X86 (Native)
Parent Process: launchd [142]
Date/Time: 2011-06-13 23:39:38.485 +1200
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: -1643976 sec
Crashes Since Last Report: 35
Per-App Crashes Since Last Report: 12
Anonymous UUID: D4811036-EA8D-479D-8D9F-11E2FC8F6D4C
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 3.5 GB
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06610000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x06500000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x06300000
I have reinstalled Mac OSX 10.6.3 and done the updates from there.
I have reinstalled ilife 11 from disk and done the updates.
I have deleted all the suggested files and then redone install and updates.
I have tried just reinstalling iphoto and doing updates.
Is there any way to get a replacement - /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
file with the right architecture? -
Ive tried to update my iphone by using wifi but the wifi connection got interupted and not my iphone wont work
Connect your iPhone to a computer and use iTunes to perform the update.
~Lyssa -
i have tried to update my i.phn 3g from 4.1 to 4.2 but it failed and then i tried to restore then its also failed,,now my device is not working,,,can somebody help me?????
No one can help you without knowing the error message and error number when it fails.
-
Hey guys I am having a problem. Could you guys give some suggestion? I can connect personal hotspot from iPad 5 to iPhone 5s via Bluetooth but the wifi doesn't recognize and can't connect. USB and Bluetooth sharing of hotspot is okay but wifi doesn't
troubleshooting hotspot http://support.apple.com/kb/TS2756
-
Hi I just got my iPad 2 and updated it to ios7 . Here is my problem: my Chinese input doesn't work , I need to restart every time . Is it the problem of the iPad? Or iOS 7??
Hi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario -
I cannot get my iWeb site to load onto my Godaddy domain.
I can get it to test the connection succesfully but the progress circle never changes and it never loads.
I know on my previous laptop and website when it was working it should a little progress circle where the little
world icon sits. Now it doesn't load.'Publish to' should be set to FTP server
Site name is the name you give to your site.
Server address - the domain name of your site, e.g. fred.com
User name - this is the specific user name for FTP which they gave you.
Password - this is the password they gave you for FTP, not the password for your account.
Directory/Path - leave blank to have an index.html file at root level and the site in a folder with its name, so that entering just the domain name takes you to the site. Or if you want it within a folder, enter the folder name.
Protocol: FTP
Website URL os the address which will reach your home page: if there is nothing in the Directory/Path field it will be just the domain name. -
My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work. Once another app is opened, it will not close either. Now none of the apps on the dock are responding. I asked him to click on the apple, and drop down to "About this Mac", but that wouldn't open either. Any ideas? If I was at his house, I would call Apple Care in a heartbeat, but am home with my sick daughter,,, Thanks!
For starters, have him open Disk Utility in Applications>Utilities, select the volume (the indented listing) and Verify Disk. If it reports any problems, have him try a Safe Boot by holding the Shift key at startup. This boot will take much longer than usual. It's checking and trying to repair the drive directory, if possible. Once in Safe Boot, have him repair Permissions.
For other Disk repair remedies see
http://support.apple.com/kb/TS1417
Also, have him try a PRAM Reset. At the startup chime, hold down CMD-Option-P-R together, listen for two more chimes, total three, then let go to finish booting.
Also, is he running any AV? If so, have him uninstall it. It might be responsible for this behavior. (There are no viruses for OS X.) -
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
-
TS3276 my server went down and now my email is not working, can anyone help please?
My website server went down and now my email is not working (though the server is back up)
Does anyone know what I need to do?
I'm told by my website hosts that I need to 'reconfigure authentication" but I have no idea how to do this, they are now closed for the weekend and I need it fixed before Monday morning. Could anyone tell me where to find step by step instructions. I've tried but have made matters worse and the couple of mail accounts that WERE still receiving email are now also not.
Help please!Hi Eyen80,
If you are having issues with your iPhone’s camera not functioning, you may want to troubleshoot using the steps in this article -
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Specifically -
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Thanks for using Apple Support Communities.
Best,
Brett L -
I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.
This is the code which we have used.
//////////Return if it is first time for the day or not//////////////
+ (BOOL)isFirstTimeToday {
BOOL result = YES;
NSDate *now = [[NSDate alloc] init]; /// represents the current time
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
NSDate *today = [gregorian dateFromComponents:components];
[now release];
[gregorian release];
NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
if (savedDate) {
if ([today earlierDate:savedDate] == today) {
result = NO;
return result;
////////Stores the date/////////////
+ (void)userDidVisitReenforceScreenToday {
[[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
////////////What [NSDate todayAtMidnight] stores/////////////////////
+ (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
[gregorian release];
NSLog(@"dateAtMidnight : %@",dateAtMidnight);
return dateAtMidnight;
+ (NSDate *)todayAtMidnight {
return [self daysFromNowAtMidnight:0];
Please Suggest.. -
My iphone 4 will not push my notifications to my phone. I reset and restored it and still nothing. I even set it up as a new phone in still nothin can anybody help me.
Hi R. Weav27,
Thanks for using Apple Support Communities. This article has some troubleshooting steps for issues with push notifications:
iOS: Understanding notifications
http://support.apple.com/kb/ht3576
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection.
Note: Notifications use Wi-Fi only when a cellular connection is unavailable. Firewalls and proxy servers may affect your ability to receive notifications. For more information, see Unable to use Apple Push Notification service (APNs).
If you're not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
Cheers,
- Ari -
hi, i have iphone 5 and it's been 2 days that it is not ringing for incoming calls and the speaker option is not working while im speaking . the videos have no sounds . every day i recieved lots of missed calls. i checked all settings related and non related to the sound feature but non were working. i even reset it and erased and reset it but still have the same problem. what shall i do?
azadeh81 wrote:
hi, i have iphone 5 and it's been 2 days that it is not ringing for incoming calls and the speaker option is not working while im speaking . the videos have no sounds . every day i recieved lots of missed calls. i checked all settings related and non related to the sound feature but non were working. i even reset it and erased and reset it but still have the same problem. what shall i do?
Have you checked the Mute switch on the left side above the volume buttons? And tried raising the volume with the buttons? -
How can I clean a mailbox and remove all but the latest message in thread, and more...
I am using Thunderbird version 24.6.0, for years I have been saving every email into a mailbox folder of a technical email alias I subscribe to.
The folder now has over 12,000 emails and I am exceeding 700 MB. Is there an Addon or tool of any kind that allows me to automatically in one fell swoop delete all but the last message in a thread assuming all prior messages included all prior messages in thread, BUT here's the hitch, if someone responded out of order to a thread or did not include prior messages, their message should be saved since it will not appear in the prior string of messages.
I can draw it out better than explain it, I want to save all responses to a thread, except those that are captured by the final message in a thread, or....
| Re:- topic1 a. don't save because all included in "c"
|- Re: topic1 b. don't save because all included in "c"
|- Re:topic1 c. save
| Re:- topic1 d. don't save because included in e.
|- Re: topic1 e. save
Thanks! edI have no idea on how, but your file needs to exceed 4Gb before there will be any kind of issue (and the guys think they have removed that limit not anyway)
Thunderbird will not move slowly or anything with lots of messages.
Maybe you are looking for
-
Add javascript to Out of the box Modal Dialogue Box in Sharepoint 2010.
Hi, We have Sharepoint and Project Server 2010 SP-2 enviroment. We are using Project Server Timesheet for our managing Time logging. Project Server 2010 has "Add existing task" Modal Dialogue box in which I want to add "Javascript" code in order to s
-
How do I set my text to be evaluated as an integer? ie. 10 is now 2?
I'm trying to duplicate a game in AppleScript that I made in BasicA back when I was eight years old. This works pretty well. When I guess 10 though, it says that I need to guess a higher number - the number can't be above 10. I realize that it's doin
-
Query w/ Seagate External Hard Drive
Hi, I recently bought a 1TB Seagate hard drive which I believed to be "plug 'n play" but that is apparently only awarded to Windows users. The one I bought is... http://www.play.com/PC/PCs/4-/9752952/Seagate-Expansion-1TB-External-USB-2-0-Des ktop-Ha
-
Button not working in Chrome Android Jellybean
The button code works fine on iPad 2/safari but is not functioning on Android JellyBean tablet Nexus 7/chrome. What could be the problem? html <a class="btn-red" href="case-study-1.html"><span><span>Case Studies</span></span></a> css .btn-red {
-
Original ipad screen font size has increased so content doesn't fit in window.
the font on my ipad (5.1.1) screen has suddenly increased in size so all the content doesn't fit in the window. I can't figure out how to restore the default font size. Any ideas?