I restored my laptop to factory settings, now cant get into itunes. Any ideas ?

I have recently restored my laptop back to factory settings as it was dying. I didn't know at the time that i should of de-authorised my itunes account off that computer first, and now it wont let me re-install itunes. Any ideas please.

Have you tried OS X Internet Recovery? http://support.apple.com/kb/HT4718 restart your Mac while holding  Command+Option+R

Similar Messages

  • Itunes wont load on windows 7.  I keep getting an error message 0x80071a91.  Previously had itunes installed but it wouldnt update, so uninstalled and now cant get it.  Any ideas

    Help,  I previously had itunes loaded onto windows 7, but it wouldnt update, i uninstalled itunes and now when i try to reinstall i get an error message 0x80071a91.  Any ideas on how to fix?

    Hi Didi221,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • TS4062 I had to restore my computer to factory settings now i can't sync my phone to my computer,help please

    I had to restore my computer to factory settings now I can't sync mine and my husbands IPHOne to my computer

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I restored my mac to factory settings, now mac states there is no OS X installed?

    I restored my mac to factory settings to erase all data.
    On restarting the mac, it prompts me to sign in with my Apple ID to install the operating system OS X Mountain lion.
    When I sign in, it tells me that I have not purchased OS X Mountain lion.
    When I purchased the mac the operating system was pre-installed, therefore I have never purchased the operating system through the App Store.
    Therefore, I have no option to continue to turn the mac on.
    How do I get around this problem as the operating system does not show up as a purchase?
    Thank you in advance
    Hannah

    Have you tried OS X Internet Recovery? http://support.apple.com/kb/HT4718 restart your Mac while holding  Command+Option+R

  • Trying to restore iphone 4s to factory settings, now its stuck on recovery mode???

    trying to restore iphone 4s to factory settings but is stuck on recovery mode. home button does not work. can anybody help me? i have tried to restoer it several times but it wont work??

    try a different cable a different usb port, drop all security software and fire wall, try a different computer here are the steps
    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn device off
    hold home button and plug cable into IOS device.  do not release home button until an itunes graphic appears on IOS device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • I can't restore the laptop to factory settings

    Hi guys, i recently got a lot of viruses on my Toshiba laptop and i pretty much cant get onto the desktop because of it, so i decided to repair my laptop via disks, but when i get so far with it, it gives me this error message
    "the file nvrd32.sys could not be found".
    I have done a lot of Googling around and not yet found a solution so im posting this thread.
    I have a Nvidia Quadro GFX card if that counts for anything.
    I have 2 disks labeled "Drivers" and "XP SP2". I enter SP2 into the laptop and i still get the same message, can anyone help me out?

    You said "So your best option would be to recover your data and run Recovery from your Recovery Discs to restore Windows back to its factory state."
    If you read my message you would know that i have tried to do that and im getting this error message, im asking for help in how i can prevent this message.
    I have AVG 8.0 full version, Ad-Aware, and Search and Destroy, all 3 cannon destroy all the viruses as they are duplicating, please provide me useful information someone please.

  • Reset, now cant get into phone

    I reset my iphone 4 because i bought it used, and it was filled with photos, messages and stuff from previous user. . And now I cant get into it with gevey turbo sim. Has this something to do with me resetting it ? I dont know what to do at all. Did i reset the opportunity to unlock it ?

    ? how is this helping me,   the phone wont let me use my simcard.

  • Had to reset computer to factory settings, now my Ipad wont sync. Ideas?

    so my computer had to be reset to factory settings, and now my Itunes account wont sync with my ipad. It wants to erase one or the other?!

    If you have it on CDs or another location, such as an external drive, import it into iTunes. If it was downloaded from the iTunes Store, fill out and submit this form or purchase the music again.
    (33593)

  • Ipod touch 4 generation referbished, now cant get into network

    sent the ipod touch away to be repaired, got a new one, now cant remember family network pass word and cant get internet connection...help

    Check your wireless router's instruction book, there should be a way to access the settings through your web browser. The password should be stored there somewhere.

  • Changed my AD password now cant get into enable !!!

    Hi
    Changed my AD password and now i cannot get into the enable side of the cisco switches on our network (we have no routers).
    Looking on the logs for the ACS v4.2 I can see the following -
    On TACACS+ Accounting you can see the connections which have worked - it the initial tty connections -
    When i look in the failed attempts i see the following -
    Auth failed -  External  DB user invalid or bad password  or on another occasion internal error
    or EAP-TLS or PEAP authentication failed due to unknown CAcertificate during SSL handshake.
    Anyone seen this before ?
    Steve

    Steve,
    Just out of curiosity can you verify your user account in ACS and make sure that the enable password is set to use external database?
    http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UsrMgt.html#wp273989
    Thanks,
    Tarik Admani

  • I have 3GS, children changed passcode and now cant get into it. Any way to disable passcode without loosing info like contacts texts etc?

    passcode was changed and dont know to what. How can i delete/change passcode without deleting contacts, texts,etc?

    If you restore the phone using the computer it normally syncs with, the passcode will be removed. The passcode is not part of the backup. You will lose any data since the last backup. If you don't have access to that computer, you will have to put the phone in recovery mode and restore it as a new device. This will erase ALL data on the phone.

  • Zen Micro crashed, now cant get into me

    I shut my micro down, it stuck on the shutting down screen, I left it for a while then i took the battery out, when I put it back in now it comes up with the creative logo and non of the buttons work ?
    Anyone had this problem, im not happy opnly got it friday and its broke already !
    Matt

    ryonavin wrote:I would recommend trying to reset it. When you take the battery out there is a little hole that you can stick the end of a paperclip or a ballpoint pen into to flip the reset switch. That fixes most of the issues.
    DON'T DO THIS! The small hole on the Micro is NOT a reset switch! It's the MICROPHONE!
    To access the Rescue Mode on the Zen Micro you need to remove the battery. While replacing the battery in the back of the player, switch the power button over and keep it held over. The player should boot up into Rescue Mode and from there you should be able to select Clean Up. This acts as a defrag of your firmware and should reset the player to default. If this doesn't work or the player freezes during the clean up try a Format All ( this will erase all media on the hard disk) Again, if this freezes or hangs, the player will most likely need to be replaced.

  • HT4993 I restored my phone to factory settings.  HELP PLEASE!

    I had to restore my phone to factory settings after an upgrade on itunes went bad.  Now I have lost ALL my info:  contacts, texts, emails, pics etc!!  HELP PLEASE!  Each time I have connected my phone to my computer it has backed up.  When I restored and it asks if I want a previous backup (YES!) it does NOT show the backup I need with all my info.  Any help would be GREATLY appreciated.  I am frantic that I lost all my information!! 

    I did back up.  On Apple I read if I restored I could use a previous back up.  But when I have connected my phone to my computer 2x this morning, it backed up.  I need to get to the 3rd previous back up.  Any suggestions please?

  • "Windows could not complete the installati​on" after restoring Lenovo T61 to factory settings, help!

    Hi everyone;
    I recently tried to restore T61 laptop to factory settings and I received the message "Windows could not complete the installation. To install windows on this computer, restart the installation". I used Dr. Google to see if I could fix the problem; but unfortunately after re-starting multiple times, restoring to factory settings (after changes to the Administrator account as well as "Oobe" settings, in any number of combinations); I still get the same error message. Any thoughts? I'm attempting to reinstall Windows Vista Business. I do apologize I'm not a computer person so if you need any additional details please let me know; thanks in advance!

    Hi,
    It may be a good idea to run a couple of hardware tests.
    Shut down the notebook.
    Tap away at the esc key as you start the notebook to enter the Start-up Menu.  Select the Diagnostic Menu option ( f2 ) and run the tests on the Hard Drive and Memory.
    If you get any error messages/codes, post back with the details.
    If the tests pass, you can order a replacement set of Recovery Discs starting on the link below - the cost does vary a little depending on where you live, but they're generally inexpensive.
    Order HP Recovery Media.
    If you have any problem with this link, see if you can order this directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • A message saying I had to restore my iPad to factory settings came up, can I recover data from previous back-ups?

    Tonight, a message came up on iTunes came up saying I need to restore my iPad to factory settings came up. Is there any way I can avoid doing a factory restoration? If not, can I recover data from previous backups?

    If you got the message that you need to connect to iTunes, there is no choice now but to restore the iOS software. Yes, you can restore from a backup after you restore the iOS software.
    You can only restore now by connecting to your computer and using iTunes, and at the end of the restore process, you will be asked if you want to restore from your iTunes backup to which you will say yes and then sync your iPad as well. Syncing will transfer all of your apps, music, movie, books, photos etc, back to the device. If you do not backup and sync with iTunes, you can still restore from an iCloud backup after you restore the software in iTunes.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766

Maybe you are looking for

  • Populate multi record display item

    Hellou gurus! I have forms 10g and i need to populate display item in enter query mode. My problem is that I have table T1 with some static values. Table T2 is through ID connected (reference) to table T1 1:1 cardinality and T2 table also have refere

  • Cisco UCS Requirements

    Does UCS (Servers and Storage) have to have Nexus infrastructure or it can also work with Cisco Catalyst 6509 series switches. If I understand correctly, Nexus is recommended switches for optimal performance and UCS should also work with Cisco Cataly

  • My photoshop and elements wont open! help!

    So, my photoshop and elements have always worked fine, I am running elements 4 and photoshop 6 but now all of a sudden neither will open. I get the opening cicley thing then nothing...have no idea what is going on....anyone any ideas?? I really need

  • Why does my Kernal_Task run so high when I first start up the computer

    Okay...I recently found out that my macbook pro 13in late 2011, main problem is my Kernal_Task......I notice it started happening this past Saturday. Everytime I put it to sleep, my CPU kernal_task runs high of 204-396% which is not normal. Then my f

  • Transaction V.15

    When I execute the transaction v.15 with company code ther is listed one order which already is finished. What shall I have to do that the order will not listed in this transaction?