I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

is it your imac?
is it your your router's name?
are you by any chance connected to another wifi router then your own because the other one was open and not password protected?

Similar Messages

How can i figure out what device downloaded apps

how can i figure out what device downloaded certain apps?

One way is to remove all apps and then reinstall a few at a time while watching the "Other" memory indicator, but this will cause a loss of any data the apps are storing, like files, high scores, settings, etc.
I don't know of an 'electronic' way of find this out.

How can i figure out what my pin number is?

i need my pin number but don't remember what it is how can I figure this out?

josh0921, I know that being without your PIN can be quite the hassel. Just to be sure, are you referring to your billing account password or are you referring to a PIN used to unlock the device? If this is regarding your billing PIN when calling into customer service that cannot be changed, but can certainly be updated after completeing secondary verification over the phone. If you need to reach out customer service you can give them a call at 800-922-0204. http://vz.to/XNtW61
AdamG_VZW
Follow us on Twitter @VZWSupport

I have a two different charges for one album. How can I figure out what each charge is?

I purchased an album and got charged two different prices. How can I figure this out?

As has already been said, The onboard ethernet is 10/100/1000 and capable of autosensing which speed it's connected at.
What is more in question is the service you have. I don't remember if cable is the same, but with DSL, there are two connection methods.
1. IP Based. A static IP internet connection that is always on. Usually three things are required information that can be given via your ISP.
A) IP Address
B) Gateway
C) DNS Servers (Without these the PC cannot resolve DNS names so it doesn't know that http://www.website.com = xxx.xxx.xxx.xxx IP address.
You can get there by right clicking Network Neighborhood, and click PROPERTIES. Then right lick Local Area Connection and click PROPERTIES. You can click the TCP/IP setting and click the properties button and enter the proper information to get you online.
2. PPPoE (Point to Point Protocol Over Ethernet). PPPoE requires software from the ISP and usually all that is required is installation of the software and a USER NAME AND PASSWORD. IP, DNS, and Gateway are all auto-determined by the remote server that the PPPoE software connects to.
Does yours use one of these? Most people use a combination router/firewall and plug in either settings. If you've already configured your settings and are still getting no access, suggest the following:
a) Reset your cable-modem, then your PC and try again.
b) Check your cable connections. You may have an intermittent connection on your net card/wire. check the pins and look to make sure they make clean contact. Try another cable to make sure there are no broken/intermittent conductors in the cable.

My macbook pro keeps freezing and shutting off when I am browsing the web on Safari. How can I figure out what is causing this issue?

For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black. I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when it reboots. I'm not sure what is causing the issue, but on my previous mac it would have an error message if something like this happened that I could submit. Any suggestions of where to start to solve this issue?
Thanks!

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

How can I figure out what my password is and keep it unlocked? Every time I do a system update, it requires the password and sends me into cyber trouble with the remember my keychain access, requiring it every time I log in. A real hassle to be avoided

How can I find out what my password on the computer is? I had to change it due to my teenagers helping themselves, and now every time there is a system update, I have to have the password, which I cannot remember or find. It then wants it every time I log in and pops up Key Chain Access as well. Very annoying. I do not have the disc to reload it and fear I would loose everything on my computer as there is also trouble with the back up system. Too many issues and not enough solutions. Many thanks in advance!

I do not have the disc to reload
Why not? You need your system dvds to troubleshoot & to reset/change passwords in view of your current OS listed in your profile.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.
===============
I have to have the password, which I cannot remember or find.
When selecting passwords, make sure it's one that you will NEVER forget AND no one else can figure out.
Old school--- > Print it out & keep in a safe place. A place that ONLY you know about AND never forget.
New school---> Get a password manager utility. Highly recommend 1Password which is shareware. Do a Google search for free password managers.

Can't figure out what this error means for a TLD file

I am new to Java and I am getting the following error. I a tld file in a tlds folder under the Web-inf folder. I am running tomcat 5.5.17. I also put the file in the Web.xml. What else do I need to do?
javax.servlet.ServletException: javax.servlet.jsp.tagext.TagInfo.<init>(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljavax/servlet/jsp/tagext/TagLibraryInfo;Ljavax/servlet/jsp/tagext/TagExtraInfo;[Ljavax/servlet/jsp/tagext/TagAttributeInfo;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;[Ljavax/servlet/jsp/tagext/TagVariableInfo;Z)V
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:272)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
root cause
java.lang.NoSuchMethodError: javax.servlet.jsp.tagext.TagInfo.<init>(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;Ljavax/servlet/jsp/tagext/TagLibraryInfo;Ljavax/servlet/jsp/tagext/TagExtraInfo;[Ljavax/servlet/jsp/tagext/TagAttributeInfo;Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;[Ljavax/servlet/jsp/tagext/TagVariableInfo;Z)V
     org.apache.jasper.compiler.TagLibraryInfoImpl.createTagInfo(TagLibraryInfoImpl.java:435)
     org.apache.jasper.compiler.TagLibraryInfoImpl.parseTLD(TagLibraryInfoImpl.java:248)
     org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:162)
     org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:423)
     org.apache.jasper.compiler.Parser.parseDirective(Parser.java:492)
     org.apache.jasper.compiler.Parser.parseElements(Parser.java:1552)
     org.apache.jasper.compiler.Parser.parse(Parser.java:126)
     org.apache.jasper.compiler.ParserController.doParse(ParserController.java:211)
     org.apache.jasper.compiler.ParserController.parse(ParserController.java:100)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:155)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:295)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:276)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:264)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:563)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:303)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:853)

Using Java 1.5. This code is from a book example, and I tried emailing the company, but haven't heard anything.
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE taglib
PUBLIC "-//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN"
"http://java.sun.com/j2ee/dtds/web-jsptaglibrary_1_1.dtd">
<taglib>
<tlibversion>1.0</tlibversion>
<jspversion>1.2</jspversion>
<shortname></shortname>
<info>The tag library for the murach applications</info>
<tag>
<name>today</name>
<tagclass>tags.SimpleDateTag</tagclass>
<info>Returns the current date</info>
</tag>
<tag>
<name>time</name>
<tagclass>tags.CurrentTimeTag</tagclass>
</tag>
<tag>
<name>checkfield</name>
<tagclass>tags.AttributeRequiredTag</tagclass>
<bodycontent>empty</bodycontent>
<attribute>
<name>color</name>
<required>false</required>
</attribute>
<attribute>
<name>field</name>
<required>true</required>
<rtexprvalue>true</rtexprvalue>
</attribute>
</tag>
<tag>
<name>weekday</name>
<tagclass>tags.BodyWeekdayTag</tagclass>
<bodycontent>JSP</bodycontent>
</tag>
<tag>
<name>products</name>
<tagclass>tags.ProductsTag</tagclass>
<teiclass>tags.ProductsTEI</teiclass>
<bodycontent>JSP</bodycontent>
</tag>
</taglib>
This is the SimpleDateTag class, which is being referenced.
package tags;
import javax.servlet.jsp.*;
import javax.servlet.jsp.tagext.*;
import java.io.*;
import java.util.*;
import java.text.DateFormat;
public class SimpleDateTag extends TagSupport{
public int doStartTag() throws JspException{
Calendar calDate = new GregorianCalendar();
Date now = calDate.getTime();
DateFormat shortDate = DateFormat.getDateInstance(DateFormat.SHORT);
String today = shortDate.format(now);
try {
JspWriter out = pageContext.getOut();
out.print("The current date is " + today + ".");
catch (IOException ioe){
System.out.println("SimpleDateTag IOException: " + ioe);
return SKIP_BODY;
}

How can i figure out what 'purchased items' i have not transferred...

Getting a message when i try to upgrade my iPad 2 to ios 6 "There are purchased items on the iPad “Becky’s iPad” that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating this iPad. Are you sure you want to continue?" but i have done the manual backup... i see kindle books on my ipad i do not see in itunes, but i think i can just re-download them from Amazon...
Trying to be sure i do this upgrade without losing any apps or data!

is it your imac?
is it your your router's name?
are you by any chance connected to another wifi router then your own because the other one was open and not password protected?

How do i figure out what my serial number is for adobe photoshop elements so i can download it?

How do i figure out what my serial number is for adobe photoshop elements so i can download it?

See this:
Find your serial number quickly

Can't figure out whats wrong with this IF statement

Hey.
I must be tired cause I just can't figure out why this IF statement doesn't work. It's probably something silly but please help me get it right. The user is prompted with a form (textfield) and I'm gonna check if its the right password (this is not the reason im doing this but it works good for this example).
if(displayable == form){
          String correctPassword = "abcd";
          System.out.println("Input: " + textfield.getString());
          System.out.println("Correct: " + correctPassword);
          if(textfield.getString() == correctPassword) {
               System.out.println("Password is correct");
               Display.getDisplay(this).setCurrent(mList);
          else {
               System.out.println("Wrong password");
               destroyApp(true);
               notifyDestroyed();
}Even though i enter the correct password, it still thinks it is incorrect. This is how the WTK compiler outputs the above statement.
Input: abcd
Correct: abcd
Wrong passwordObviously the passwords DO match, so what am I doing wrong?

The == comparison operator returns true for equal primitives OR for variable references to the same object.
Classes (usually) override the .equals (Object obj) method inherited from Object to return true when objects of the class are essentially equivalent.
Run this java code segment and try to understand the output.String aStr = "A string";
String bStr = aStr;
if (aStr == bStr) System.out.println ("== true");
else System.out.println("== false");
if (aStr.equals (bStr)) System.out.println (".equals true");
else System.out.println(".equals false");
System.out.println();
bStr = new String ("A string");
if (aStr == bStr) System.out.println ("== true");
else System.out.println("== false");
if (aStr.equals (bStr)) System.out.println (".equals true");
else System.out.println(".equals false");
System.out.println();
bStr = new String ("Some String");
if (aStr == bStr) System.out.println ("== true");
else System.out.println("== false");
if (aStr.equals (bStr)) System.out.println (".equals true");
else System.out.println(".equals false");Ask again if it's not clear enough. But first, read the API for Object.equals (Object obj) to understand the contract of .equals (...)
db

HT1918 How do I reset security questions if I can't figure out what I entered originally?

How do I reset security questions if I can't figure out what I entered originally?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122209)

I Have just downloaded the latest upgrade and now my Mac Book Pro will not boot up !! how can I get out of this ?, I Have just downloaded the latest upgrade and now my Mac Book Pro will not boot up !! how can I get out of this ?

I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,

Try starting in safe mode:
Ciao.

How can i figure out the answers to my security questions if i forgot the answers

how can i figure out the answers to my security questions if i forgot the answers

Welcome to the Apple Community.
Start here, and reset your password, you will receive an email with your new password, then go tomanage your account > Password and Security and change your security questions.
If that doesn't help you might try contacting Apple through iTunes Store Support

How can I figure out where are the heaviest volumes in order to get rid of the useless stuff?.

How can I figure out where are the heaviest volumes in order to get rid of the useless stuff?.

How about a few specific NOUNs to replace the vague references you have made. A little context.
Volumes of WHAT ?
What sort of STUFF are you trying to eliminate ?

Every time I hit the app store I get the message "loading". How can I get out of this and get the app "qrreader" that I want to load???

I'm getting a little frustrated trying to get the "APP " "qrreader". Everytime I tap on the APP icon it is "loading". How can I get out of this and start over with the
APP I want???

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

Similar Messages

Maybe you are looking for