I shut down new update in middle-now I have nothing

Well I got up this morning to an update that said it would take 10 mins.  So an hr later I still see it circling, I thought it was frozen.  I couldnt power down or anything, so I pulled battery.
Apparently some update took place as the new home screen is there but everything else, contacts, emails, sync, all that is gone and most icons I touch they hold and come back asking if I want to wait.  I went to - about phone -system updates - but it just sits there looking and has been for 20 mins.
Any help?  I go out of town for a week for work tomorrow and Im married to this phone.
Thanks

Have you tried clearing the phone cache?  That's highly recommended after an OS update.
If you need them, instructions are toward the bottom of this thread:
https://community.verizonwireless.com/thread/782614?start=60&tstart=0

Similar Messages

  • I tried to install the new iOs 7 on my iphone5 and itunes shut down before it completed and now my phone is stuck on with the apple and a line under it.

    I tried to install the new iOs 7 on my iphone5 and itunes shut down before it completed and now my phone is stuck on with the apple and a line under it.

    Hello roch23
    Check out the article below to get you back up in running.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I update I cloud in my computer but i forget plug my device iphone 5s in my computer, suddenly my device shut down automatically, what's wrong, now I can turn on my iphone 5s. How I solve the problem

    I update  icloud in my computer but i forget plug my device iphone 5s in my computer, suddenly my device shut down automatically, what's wrong, now I can turn on my iphone 5s. How I solve the problem

    Hi fransiscasanti28,
    If you are unable to power on your iPhone you may want to troubleshoot using the steps in this article -
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Specifically -
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I have a new ipad 2. As soon i load an application the screen is getting grey and the applivatiuon shuts down. What can i do, i have a new ipad 2. As soon i load an application the screen is getting grey and the applivatiuon shuts down. What can i do

    i have a new ipad 2. As soon i load an application the screen is getting grey and the application shuts down. What can i do, i have a new ipad 2. As soon i load an application the screen is getting grey and the applivatiuon shuts down. What can i do

    Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

  • Mountain lion was shutting down properly at first. Now it continually reboots. how do I fix that?

    Mountain Lion 10.8 was shutting down properly at first. Now it just continually reboots.

    Sounds like an issue for Lion Community for one, and worth try booting from Windows DVD and run auto repairs.
    Did you ever erase your hard drive or update, when you installed Lion? There wre problems with upgrade to Lion 10.7.0 and Windows partitions on systems running 10.6.8.
    There are also problems associated with changes in 10.7.4 which is why waiting a week for reports to surface.
    When you update OS X just like Windows it needs to reboot into OS X to complete the update. I'm not sure what and why, or whether you are talking about trying to use Lion Recovery mode.
    To me it sounds like a partition table, maybe 10.7.4 tried to update or modify something more than just the OS.
    And of course make system restore images for both and any OS when it is working and before install updates. OS  X lets you make bootable clone and sparse disk image as well as TimeMachine. Windows will create a restore image of the system also.
    Boot Windows DVD can't hurt.

  • How do I condense my itunes files? As each new OS came out, I put it on a new drive...now I have 4 SSD drives, with 2 copies of iTunes..how do I condense them all down to one all-encompassing library?

    As each new OS came out, I put it on a new drive...now I have 4 SSD drives, with 4 copies of iTunes..how do I condense them all down to one all-encompassing library? Early 2008 Mac Pro Tower.

    dsf,
    Not sure exactly how you moved your library but this link may help
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/

  • Sony xperia z1 shuts down while updating to 14.3.A.0.757

    Hi
    I just got the xperia Z1 and im trying to update to 14.3.A.0.757 but while its peparing the phone shuts down,
    I tried doing what it says and nothing ( it tells you to hold the volume button down and reconnet the micro usb)
    I tried to hold the power and the volume up button and tried resseting it to factory still same thing keeps happening.
    I tried using sus but it still doesnt work.
    any help would be appericated thanks.

    Do this:charge the phone for 2 hours,force shutdown(power button+vol up until the phone vibrates 3 times).Repair with SUS:
    http://www.sonymobile.com/gb/tools/update-service/
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • I can't Log Out/ Restart/ Shut Down after updating to Mavericks

    I can't Log Out/ Restart/ Shut Down after updating to Mavericks.
    When I choose the above options nothing happens.
    MBPr can only go to sleep.
    When i force quit loginwindow from Activity Monitor nothing happens.

    I can sudo reboot /shutdown
    I tried several solutions on other threads nothing worked.

  • When updating to the new iOS my ipod died and now I have nothing but a white screen that won't turn off and itunes now doesn't recognize it

    When I was updating my ipod touch to the new iOS last night it died and now I have nothing but a white screen. iTunes no longer recongnizes the device and it won't turn off when I hold the power button or when I hold the power and home screen button.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • If I YouTube have examinated small film I have been possible fix no longer on picture (since last update 26 july) now I have got a black planed in plate the blade ven the film. I cannot fast scrolle on picture.

    If I YouTube have examined small film I have been possible fix no longer on picture (Since last to update 26 july)
    now I have got a BLACK PLANED in plate the blade ven the film. Now I cannot fast scrolle on picture (since 26 july)
    I hope someone get the answer! In the Apple shop they say, may be by the next Udate it will be pepared?

    That is priceless!!!  Thanks!  I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement.  Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
     My error msg is a little different from those previously stated, but close:  0xc18a0201.  Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100.  I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
    Oh heavens, I've had the c6280 a whopping 2 1/2 years!   I'm sure they want us poor slobs to have to buy a new one every year & a day!  To say nothing of the exorbitant prices for ink.  And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!!   Yeah, & what's with that not being able to print in BLACK if a color runs out????
    Anyway I really loved your essay!   It's a classic!  And says it all!  I hate that we have to be 'slaves' to the electronic 'wonders'!!!

  • Since I installed Mountain Lion, my iMac has shut down after 15-20 minutes. I have adjusted screen saver, shut down time, and sleep after. Nothing seems to help, any ideas?

    Since I installed Mountain Lion, my iMac has shut down after 15-20 minutes. I have adjusted screen saver, shut down time, and sleep after. Nothing seems to help, any ideas?

    As old as your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
    You are now in a perfect position to do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    Here is a link to a Widget to monitor your temps and other operations:
    http://islayer.com/apps/istatpro/

  • I just purchased a new ipod touch so now I have two. I do not want the second ipod touch to sync the same as the old ipod touch - 2 people with 2 different music preferences. How do I keep them separate.

    I just purchased a new ipod touch so now I have two. I do not want the second ipod touch to sync the same as the old ipod touch - 2 people with 2 different music preferences. How do I keep them separate.

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • During update my ATV2 displayed icon to connect to iTunes. Now I have nothing -- can't even get to menu to do restart and ATV2 doesn't show up in iTunes menu to do restart from there. Help!

    During update my ATV2 displayed icon to connect to iTunes. Now I have nothing -- can't even get to menu to do restart and ATV2 doesn't show up in iTunes menu to do restart from there. Help!

    The update didn't apply correctly.
    Did you follow the steps exactly in order to restore? disconnect all cables, open iTunes, then connect micro usb
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    Make sure to connect directly to computer, not a keyboard port or USB hub. Try a different cable.

  • I updated to ios5. I never synced my apps to my PC. Now I have nothing to restore my apps from???, I updated to ios5. I never synced my apps to my PC. Now I have nothing to restore my apps from???

    I updated to ios5. I never synced my apps to my PC. Now I have nothing to restore my apps from???

    Have you failed to maintain a backup copy of your computer?  not good.
    The ipod is not a backup device.
    You can redownload itunes purchases.  Open itunes store, click Purchased, under Quick Links
    You should always maintain a backup copy of your computer.

  • I changed my password to use migration to transfer files from a G4 to a new macbook pro but now I have to sign in every time. How do I avoid the sign in?

    I changed my password to use migration to transfer files from a G4 to a new macbook pro but now I have to sign in every time. How do I avoid the sign in?

    I clicked on keychain access but getting a warning that it quit unexpectedly and it won't reopen.

Maybe you are looking for

  • How to delay creation of VideoDisplay

    My Flex' app reads an xml with different video-source-url's. On the same time the VideoDisplay is created. But it does not have the url for the VideoDisplay source property because parsing is taking to long. How can I delay the creation of the VideoD

  • Unable to install Windows 7! Black screen?

    Unable to install Windows 7! Black screen? Hey everyone! Some background info: I built my computer ~2 years ago and it worked fine for about half a year, until it crashed. Since then I've been unable to reinstall Windows and I kinda forgot about it..

  • How do I place a SubReport on the last page of a report?

    Post Author: KPichelman CA Forum: Crystal Reports I am using CR 9.0 and C# to create a report.  Now I need to place a subreport (a signature box) on the last page of the report and I seem to be having difficulties.  I will not know the number of page

  • Contion value changes or inclution freight condition aftr GR

    Hi Friends Is it possiblt to add freight condition in PO after Goods receipt ? Is it possible to cahnge the value of Freight in PO after GR. Please confirm and procedure for the same Rgds Madhavan

  • How to set default alert time?

    Whenever I set up a new calendar item on iCal and want to set an alarm one or more days before the event, the alarm defaults to 11:45PM. I would like to change this default time to something like 9:00 am. I've checked preferences but don't see any wa