I started editing a project on FCPX Trial. Does anyone know how I transfer the project to the 'purchased' FCPX now that I've bought it? Thanks.

I started editing a project on the trial version of FCPX. I just purchased the 'real' version.  Does anyone know how I transfer the project to the 'purchased' FCPX now that I've bought it? Thanks.

Joshink wrote:
Thank you, Rus! Safe to assume it will be churning awhile, as it's been doing?
I wouldn't expect it to take long at all.
Is it an extremely large library with a lot of media copied to it?

Similar Messages

  • I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the one PSD files by distorting the images and colour. Does anyone know how to recover the original images?

    I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the open PSD files by distorting the images and colour. They are now completely unrecognisable and unusable. Does anyone know how to recover the original images as I was saving them as I went along but the files are now corrupt?

    What version of Photoshop are you running?
    I've seen a couple of instances over the last week or two where Photoshop has added masks, strange colours and also merged content from two separate PSD files that were open at the same time.
    This has occurred on two different iMacs, (both 10.10.x) running Photoshop CC 2014.2.2 (20141204.r.310 x64).
    see image below for example:

  • When I work in DPS, InDesign starts opening old documently by itself. Does anyone know how to make it STOP?

    My InDesign opens a bunch of old documents almost every time I start working with DPS panels. I was told it was a bug and to change the names of docs but I work with HUNDREDS of docs on a large server that others access so this is not practical. Does anyone have suggestions?

    Not that I know of but there may have been objects (picture boxes or text) that was copied from those documents.

  • Does anyone know how to slow the audio for published project

    I have been using Bridget in Captivate 7 with a VTML speed of 95 which in development sounds normal and the appropriate speed but when I published the project, its like she goes through the narration quick.
    I see it happens only when the sentences are extremely short for example Step 1: Select tool but if it is two line sentences, the speed is normal.
    Is there a way for me to address this vs. redoing the whole speech syntax?

    Check System Preferences > Sound

  • Does anyone know how to set the starting time for an audio book?

    I am trying to restart a burn in iTunes that failed for an audiobook. I need to set the start time so it will not have to reburn the disks that were already completed. I cannot find out how to do that in version 11 if the book consists of more than one file. Anyone have an idea how to do this? Apple wants me to pay $20 for something that should be in the help menu.

    UCCX 5.0(2)SR02 is the version
    I attached a screenshot of what I am trying to use but I am not sure what to put as the value?  I tried using "now" and "null" but no success.

  • Does anyone know how to delete the extra copies of Books in Digital Editions.

    I have Adobe Digital Editions but I have multilple copies on the computer Adobe Bookshelf.
    I can't seem to find a way to delete the extra copies with out deleting the one good copy on my Sony E-Reader.
    Please help,
    Carollyne

    Check Settings > General > Usage to see what is using your storage.

  • When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip.  I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

    When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip.  I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

    This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
    (PS Everybody please make noise on this one so apple comes up with a solution.)
    < Edited by Host >

  • I am using system 10.7.3 and my I photo 9.2.3 keeps crashing upon start up.  Does anyone know how to correct this without losing my photos?

    I am using system 10.7.3 and my I photo 9.2.3 keeps crashing upon start up.  Does anyone know how to correct this without losing my photos?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. For privacy’s sake, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

  • My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this. I updated both windows and iTunes.

    My 6th generation nano isn't recognized by my computer. When I plug it in an error message pops up, which says "USB Device Not Recognized". Does anyone know how to start trouble shooting this? I updated both windows and iTunes.

    Work through all the suggestions in this Apple support document first.
    iPod: Does not appear in Windows or iTunes and Device Manager is empty
    B-rock

  • Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book mo

    Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book module? I can click into any other text window and edit and change attributes but I am locked out of editing text when it comes to the spine of the book. I spoke to Blurb support and they referred me to Adobe. I spent 45 minutes with support here - no one knew. I am still waiting for a call back with an answer... not holding my breath as it's been a few hours now. HELP!!!

    Thanks for your reply John. I have experienced all the fiddly aspects you mentioned - these are attributes and although changing them requires the skill of a surgeon's hand - it's the actual editing of the text I can't seem to access anymore. The box just won't allow me to do anything except change attributes. Does that make sense? And it's only on the spine where I am having this issue. Puzzled! I have even rebooted the program and just now the computer - to no avail. 

  • I have photoshop Elements 12 a and I can pull up the photo but can't edit it. Crop it. Add text. Does anyone know how to fix this?

    I have photoshop Elements 12 a and I can pull up the photo but can't edit it. Crop it. Add text. Does anyone know how to fix this?

    Apparently it's related to the Firefox plug in.
    This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
    1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
    2. Select to "Options
    3. Select "Applications"
    4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
    5. Open a test PDF. It should open in it's own window now.
    Again, not a complete solution but something that'll at least let you scroll with PDFs open.
    More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

  • My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

    my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

    If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
    **Imediately backup ALL your important data while you can still see things on the monitor
    Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
    nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
    perform SMC reset just to check:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 

  • I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

    I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    Plus, EXACTLY what are you editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Mach

    I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

    http://support.apple.com/kb/TS2986

  • I have a Canon MG6120. When I start it I get error code 5050. Does anyone know how to resolve this?

    I have a Canon MG6120 all in one. When I start it I get error code 5050. Does anyone know how to resolve this, besides power off/ power on?
    Solved!
    Go to Solution.

    Hello gregg.
    Please try the following to see if we can resolve your issue:
    1.  Turn the printer off.
    2.  Unplug the power from the printer for at least 5-10 minutes.
    3.  While unplugged, remove any paper from the unit.
    4.  Double check for any obstructions found in the unit or paper paths.
    5.  If no obstructions are found, plug the power back in and turn the unit on.
    If the issue persists, the unit will require service for correction.  We apologize for this inconvenience.  Please contact our support group using the "Contact Us" option below for additional assistance.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for

  • K7T Turbo-R (6330 v3) & Athlon XP 1800 Problem

    My current system is a K7T Turbo-R that I've had for a couple of years now.  During this time, I've used an Athlon T-Bird 1.33GHz processor without any issues - very stable (I can probably count on one hand the number of lock-ups).  The power supply

  • Error/warning in dict. Activator while activating the infocube

    Hi All,     When we are trying to add one of the characteristic info object into Infocube, the system throws following message. deleted the index ,then also same issue. Activation of Objects with Type InfoCube Checking Objects with Type InfoCube Chec

  • Adding the Philippines to a map

    When I try to add the Philippines to a map in iPhoto, it only highlights one island.  I'm entering other countries in the map, and it doesn't seem to have a problem with e.g. Vietnam or Cambodia (when I enter those it highlights the entire country).

  • Need feedback on how to tune that procedure

    I have this procedure: PROCEDURE need_a_tune IS CURSOR c_tran IS SELECT c1,c2,c3 FROM t1 WHERE c1 <= sysdate -7 FOR UPDATE; BEGIN FOR v_tran IN c_tran LOOP BEGIN INSERT INTO t2@another database (c1,c2,c3) VALUES (v_tran.c1, v_tran.c2, v_tran.c3); DEL

  • Importing raster data

    Hi I am having problems importing a 50MB TIFF file. Background: My table containing Georaster Object: SQL> desc mm_loch_image; Name Null? Type IMAGE_NAME VARCHAR2(24) GEOR SDO_GEORASTER I have initialised the Georaster object - insert into mm_loch_im