I switched from Sprint for THIS???

Sent:      Fri Jul 20 08:05:39 EDT 2012
To:    << personal information removed >>
Primary Subject: Internet and Data Products
Secondary Subject: Broadband Access
Message Body: My Jetpack 890L is repeatedly dropping out of 4g mode to EVDO, dropping connections, and not reconnecting automatically. This has been going on since Ive had the device and after 2 service calls. In the first call, your tech tried to tell me that I'm not even in a 4g coverage area. The 2nd was much more helpful, acknowledged that I should actually be getting 4g and tried reprogramming the 890L after it showed on his end on not being fully activated. I am on the most current firmware. I am about 0.75 miles from the tower, and my device has a direct line of sight to the tower with no obstructions. I usually have 4 or 5 bars shown for signal strength. This is getting ridiculous. This morning I'm trying to work from home and its dropped connection 4 or 5 times already. Is there no way to open an actual trouble ticket????
Date: Fri, 20 Jul 2012 12:22:13 -0400 (EDT)
From:   << personal information removed >>
Hello Chad,
I understand how frustrating it is to continuously lose your connection. My name is Renee and I am here to help.
I have taken a look at your account and notes from the previous representatives with whom you worked. Based on the troubleshooting that has already been done, it will be necessary to submit a trouble ticket to our engineers, which I have done. Your ticket number is   << personal information removed >> It typically takes 2-3 days to fully investigate an resolve and issue like this, although this time may vary based on the nature and complexity of your issue.
Chad, I am confident that we can get this issue resolved for you. Thank you for choosing Verizon Wireless. I hope you have a terrific day.
Since 7/20 - no improvement and no update on   << personal information removed >> and there doesn't seem for me to have any way of looking up the ticket myself.
Based on all the negative feedback on these Jetpacks, is Verizon doing ANYTHING at all on these issues???

Red,
The only way to check in for updates is to call the 1-800 number and speak to a rep in the Technical Support area.  Enter a bogus hardware replacement problem into the automated menu so you can speak to someone.  From there the rep will be able to look up your file and tell you if any progress has been made.  Chances are that if your ticket is sitting with the engineers that there is no progress to report anyways.
If it were me I'd continue checking in every few days for updates.  It's never happened to me but there are several threads where users claim VZW dropped thier tickets without following up with them.

Similar Messages

  • Need inputs from u for this scenario?

    Hi all,
    I have one scenario I need all inputs from u all.
    My scenario is like this.
    I will get data from online transactions I need to collect all the day transaction into one folder and upload them into SAP system at one particular time.
    Which are the best adapters for this scenario.
    If I have standard IDOC I will go with IDOC adapter at receiver side if not proxy.
    But collecting all the data into one folder and schedule the process at particular time.
    How to do this and what are the adapter I can use.
    Thanks and Regards,
    Phani Kumar.

    Hi,
    I hope for online transactions and for tracking it and saving you can write a java script where you can prepare a XML file to get all transactions for particular order and always append it to the end of that xml file. At end of the day you will have a complete transaction list in the XML you are creating. You can use the file name as you desired but i will prefer datewise name.after the completion of that Transaction recording step, put it in some In folder from where your XI system willo take input.
    Now this is file to Idoc scenario or whatever you want to use to post data to SAP Systems. The sechdule this scenario to run in the night or your desired time. After processing the XML file put that file\ to some other complete folder , not to get it again.
    For collection of transactions you can also use databases. Then you scenario will be JDBC to IDOC or the thing you want to post data in SAP system.
    Hope this will help you.
    Regards
    Aashish Sinha
    PS : reward pints if helpful

  • Switching from sprint droid to iphone4:is there an APP FOR THAT??? lol

    i was wondering how easiest way i can transfer contacts from droid to iphone.. i had a droid thru sprint and upgraded to iphone4.. droid is not activated, iphone is.. which would be better: sync info on droid (its not activated, can i connect to wifi tho, instead of mobile network and sync to google? ) then open google somehow (how??) on iphone 4 and sync?? or connect droid to usb and laptop and somehow transfer to iphone4 as a different folder or drive? i don't use outlook or anything, can i just use windows explorer and drag and drop or something? or is there maybe a specific app that takes care of this?? even how to transfer all info from droid onto SD card and transfer THAT to iphone??? trying to figure out easiest way to transfer my boyfriend's stuff.also, what best ringtone app for iphone..thanks!! (former ipod user turned droid user turned back to iphone user lol)
    -kristin

    http://www.technobaboy.com/2012/03/27/how-to-transfer-contacts-from-android-to-i phone-4s/

  • Firefox always on top (No Addon's installed) I moved away from chrome for this but it still happens in latest version?

    I have installed latest version of FF
    It started off great for a few hours and then it happened, ALWAYS ON TOP
    I have to shut down and start again
    no additional add-ons have been installed, it is out of the box
    Can you please fix this? I have the same issue with chrome which is a great browser however it actually is so problematic for me that I switched to mozilla. However you have the same problem.
    Help please.
    Regards
    -=D

    When this happens, can you force all windows to minimize as a workaround (instead of shutting down), then choose the desired window from the jump list on the Firefox icon on the task bar? Either:
    * Window key + d
    * Window key + m
    * click the unmarked vertical button at the far right end of the Windows task bar
    I can't think of a way for a web page to put itself in front of all other applications, but perhaps it could do so using a plugin.
    Have you noticed any pattern in the sites where this happens?

  • I recently reformated my Xp and I have not updated my Palm Hotsync program for treo 755p from sprint for a very long time . Can someone direct me how to do an update on my PC? Thank you

    null
    Post relates to: Treo 755p (Sprint)

    hello pmj54 and welcome to the forums.....
    You can download and install the Desktop software with the Hotsync Manager from this web site.
    http://kb.palm.com/wps/portal/kb/na/deviceselector​/page_en.html#NA%20Phones:Treo%20755p
    Let us know if we can help you come more..
    Thanks,
    Colapop

  • Switching from CC for teams to CC for individuals

    I had Adobe Creative Cloud for teams through my employer and that membership ended in September.
    Just recently I purchased Adobe Creative Cloud for individuals - January 26 or so.
    I uninstalled the old CC programs and installed the new ones but every time I try to actually USE the new programs it says my membership has been cancelled!
    Does anyone know how to fix this problem? I'd be most appreciative!

    I chatted with an Adobe rep and he told me to log out and log back in. It worked.

  • Switching subscription from "Photoshop for Photographers" to a full yearly 30$/month subsciption

    Hi! I've switched from "Photoshop for Photographers" to a full yearly 30$/month subsciption, but the "Photoshop for Photographers" still stays. Is that a bug, or a feature? Also, if it's a feature, should I early-cancel it, or will that change my new subscription price?

    i don't see it as much of a feature because you're getting nothing for that $10/mo.  cancel it.
    Cancel your membership or subscription | Creative Cloud

  • Wanting to switch to Sprint

    I have been a Verizon customer for 6 years now and I am just fed up with my high bills. I am on the Edge program with my LG G3, if I just want to switch to Sprint(for the unlimited data), all I have to do is buyout my contract right? Can someone please help me out.

    Oh no bigdaddykyle6, we certainly don't want to see you go anywhere unless it's right here with us! We appreciate your long time loyalty and are here to help you in any way that we can! Let's review your plan together to ensure you have the best fitting one. Which plan are you currently on please? Are there any other fees you are referring to? Thanks in advance for clarifying! I look forward to resolving these issues soon! Thanks.
    KristieQ_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I  have no service on my iphone 3gs. Is there a fix for this problem.

    I have no service  or no 3G Network on my iphone 3GS. Is there a fix from Apple for this problem.

    Sometimes this happens to me, I know I am old school as well with an iPhone 3g hey what can I say I got a great deal on it. If I do a reboot, hold the power button and home button down for 10 seconds, and then hold the power button down until the apple logo appears it usually fixes this issue.

  • HT3529 My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

    My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

    jengrz wrote:
    My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?
    TechCrunch posted a solution today that applies to this problem, I think.
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Click your old iPhone and "unregister" it.
    More info here:
    http://m.techcrunch.com/2012/01/05/i...d=tc_home_art&

  • I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

     I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.  
    I am currently using Photoshop Elements 8 on Windows 7.  After several years of use, I am self taught and adequately proficient for an amateur.  What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing. 
    Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust.  Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom.  Frankly, I'm thinking that it would be smoother to stay within the Apple product line. 
    So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies).  But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
    - If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?  
    - if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?  
    - Can it splice together several separate photos to give a panoramic?  
    If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not  support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).  
    Thanks in advance for your consideration and help! 

    I am concerned, however,  about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
    Thanks for any insight on this
    Amy,
    Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
    One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
    The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
    Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
    One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

  • I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new compute

    I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new computer.

    YOu need to sign out of the PC thru the CC manager and then sign in on the Mac.

  • I have CS6 Design & Web Premium, would like to switch from PC to Mac. Can I do this for free?

    I have CS6 Design & Web Premium, would like to switch from PC to Mac. Does anyone know if it's possible to do this for free? I have no interest in upgrading to CC.

    Order an Adobe product platform swap or language swap
    Mylenium

  • HT1386 How do I switch users on wifi sync for example my Mac has two users one apples MacBook pro the other is my name I want to switch from apples MacBook pro to my name how is this done?

    How do I switch users on wifi sync for example my Mac has two users one apples MacBook pro the other is my name I want to switch from apples MacBook pro to my name how is this done?

    Try connecting the iPad to the computer that you do not want to WiFi sync with and uncheck the WiFi sync option in iTunes. Then click on Apply. Reboot the iPad and see if that does the trick.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • HT3702 I am currently being billed a monthly charge from iTunes for Pandora ($3.99) but would like to switch to the annual billing rate of $36. Does anyone know how this is done?  Thanks for your help.

    I am currently being billed a monthly charge from iTunes for my Pandora subscription ($3.99/mo) but would like to change to the annual rate offered by Pandora which is $36.  I don't see where that change can be made through the iTunes Store.  Any ideas?  Thanks.
    A

    How recently did you switch?  If it's less than 60 days, then Verizon simply reinstates your previous account.  The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices.  I'm not sure how it will go - but since you are still being billed for the devices... 

Maybe you are looking for

  • No sound in Keynote videos

    Hi. I am getting a strange problem since installing Leopard. Sound completely disappearing from videos in Keynote. Then return if I open sound preferences/ and once when ~I plugged in an ethernet cable for back up. What is happening? Do I need to wip

  • How do you connect SMS pads to copper areas in ultiboard?

    I have a TQFN part with multiple pads. I want to connect the pads to a copper area I have defined. I gave the copper area the same net number by using properties/vonnect to net. Now the rats nest lead from the pin (net 22) goes to the copper area but

  • DBMS_XSLPROCESSOR

    I have the following XML which I want to extract each value for the following: *<TN>VALUE1</TN>* *<TN2>VALUE2</TN2>* *<TN>ANOTHER VALUE 1</TN>* *<TN2>SECOND VALUE 2</TN2>* and the following values: *<DetailLine1>Detail line 1 value</DetailLine1>* *<D

  • Converting video to Flash with controls

    I want to take video from a DVD and turn it into a Flash movie so I can use it on a web page. I would like it to have the controls for playing and pausing. What would be the easiest way to do this? Is there certain software I should be looking for? T

  • Captivate 3 - Getting playback skin and presentation on same file when publishing

    When I publish I am getting two different files - one for the skin and one for the preso.  The skin files shows the skin w/o preso and the preso file plays fine but w/o the playback skin.  How do I publish in order to get both on one playable file? T