I think I killed my Mac, trying to install XP - Help, please!

I am at a loss. I cannot boot my computer in OSX, but when I try to boot it will the install disk....it comes to the first screen for what language, but then says OSX cannot be installed on this computer.
Perhaps it is still on the computer and that is why...but I cannot find it, though I am not that savy with this stuff. I tried holding down the option key and it just lists a windows start up disk...but that is not working as it just recycles trying to install windows xp.
oh my, I am sick.
If anyone can help, please let me know!!

It is common when installing Windows for the install disk to have to reboot the machine to proceed to the next step. People familiar with Windows installation are not thrown by this - but a person new to the task might be confused.
In Boot Camp this can throw you off because it does not prompt you as to your job in the procedure.
If you don't do anything your Mac will boot back to OSX and Windows will remain un-finished. Here it is: if you are installing Windows and the machine closes down and re-boots, always hold down the 'option' key (or if you like - the 'c' key) so you can avoid an automatic boot to OSX - choose the 2nd hard drive icon. Windows always wants to boot back to Windows - to finish the job.
If you want to erase your Boot Camp error - just boot to OSX, open Boot Camp Assistant (found in "Utilities" which is found in the Applications folder) and choose to create one partition. Your OSX install will not be hurt by this.
If you want to wipe your computer completely (as if factory new) in order to install OSX from scratch then first install your OSX DVD and boot (holding down the option key or else the c key - then select the disk icon) - after language selection wait for the tool bar at the top to appear, select utilities > disk utility and click the hard drive (listed at the top of the list) and then click 'partition'. Then under 'volume scheme' select 'current' and create a 3 or 4 partition (takes a minute) and then undo this and create a one partition. This should blank-out the computer hard drive completely for you to start fresh - all will be erased.
If your Mac will not boot properly and you happen to have materials on your machine that you MUST save or recover, then you will need different help than I describe here.
Message was edited by: NA Smith

Similar Messages

HT1349 hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

Hi.
I had a similar problem myself. This is what helped me.
I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID. Then went back to app updates. Once I put in my ID password all was fine.

TS1741 Bought an app last night. Tried to buy another an hour later and got the window that says "Cannot connect to iTunes Store". Still unable to connect today. Tried restarting router. Help please....thanks!

Bought an app last night. Tried to buy another an hour later and got the window that says "Cannot connect to iTunes Store". Still unable to connect to store today. Tried restarting router. Help please....thanks.

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

New to MAC, trying to install CANON MP520

Hello,
I'm new to MAC, I bought an iMAC 8,1 several days ago with operating system 10,5 (I guess?!...)
I'm still struggling to get rid of old window-habits, but first days working with this machine was fun!... until i tried to install my new flashy printer via wireless router...
The printer is a CANON MP520, the router a USR5461. Tried following the guidelines for installation provided by USR, but it doesn't seem to be up-to-date (Printcenter is not installed on my MAC while USR thinks it should be?!...). Anyway, tried it another way (a bit on intuition, a bit on forum searching) by adding it in printerlist:
First choose tab “IP”
Protocol: IPP
Cue: nothing
Host: ip of my router
Location: printer location as specified on router status page
Now, I downloaded a driver from canon website for MP520 on MAC, went pretty easy (downloading software is nice and easy on MAC, I must say), so I could select “CANON MP520” as driver.
OK, everything works fine, tried printing a page; result: error message “no pages found”
Searched some fora for a solution (in fact first USR website, but that didn’t help me a lot) and came up with this forum. I found a thread on a similar problem (http://discussions.apple.com/thread.jspa?threadID=1605028&tstart=0), but to be honest, I don’t understand the solution (I tried re-installing the printer several times, same problem…)
It’s my first post here, sorry if this maybe is a trivial problem, but I’m new to all this and don’t know where to start looking for the solution, so if anyone can help me out here or redirect me to a more appropriate place to find help for this problem, please do so…
Thank you!

Wish that Windows habits somehow related...
OS X has two kinds of print drivers - Carbon and CUPS. With Carbon drivers, the author/manufacturer gets to specify which comm protocol(s) will work. Your Canon driver is a Carbon driver, and works only with USB. IP printing > IPP is a CUPS protocol, and requires a CUPS-capable driver. Apple included Gutenprint drivers (CUPS drivers) to try to get around this problem (that they created by allowing two kinds of driver). You might need to update your Gutenprint to have your model supported (I'm not certain - you'll need to check):
http://www.linuxfoundation.org/en/OpenPrinting/macosx
Next issue - US Robotics uses a non-standard port number for IPP, so you'll have to use the Advanced IPP protocol so you can put in that non-standard port in the setup. (Click the '+' button to add a printer. This opens the Printer Browser. Then hold down the Option key and click More Printers; this lets you access the "Advanced" options from the first popup menu.) Select IPP using IPP or http (they're the same). Enter the URI like:
ipp://[IP address here]:1631/printers/[queue name] listed in USR manual

Adobe Extension Manager CS5 is not showing Photoshop CS5 under products. I am using a mac trying to install a plug in for Kubota auto album.

I have a Mac, using chrome, and trying to install Kevin Kubota Auto album into Photoshop. Talked with Kevin Kubota support and they said they can't help me anymore because my Adobe Extension Manager was reinstalled and will not display Photoshop CS5 under products. Please help !!!!

EXACT and complete info, please.
BOILERPLATE TEXT:
Note that because this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Thinking of moving to Mac from PC--need iPhoto help

Hi All,
I'm thinking about getting my wife a Mac to replace her PC to get a better computing experience. She's not very computer-literate, and the frequent Windows lockups and other problems are causing much frustration.
She mainly works with digital photos, creating slide shows for family members to view on their macs, pcs, and tv sets. She currently uses Photoshop Elements 5 for WIndows for her work. It's my understanding that there are some differences between PSE5 for Windows and PSE6 for the Max. The Windows version has Organizer, which is the component that allows you to organize photos (tagging, etc) and create slide shows. The Mac version uses something called Bridge.
My wife spends most her time creating albums, slide shows, printing pictures and the like, but she only does light editing. I'm thinking that she may be better off with something iPhoto than with Elements. One issue we have with PSE5 is that it creates photo cds, not true dvds, and the quality of slide shows played on a tv set isn't very good. Another issue concerns how we'd do the conversion. I guess we'd lose the slide shows we've already created, but can we preserve the photo takes?
I'm really flying blind here, having never worked with a mac or iphoto. Any help or advice from this community would be greatly appreciated.
Thanks much,
David

Welcome to the Apple Discussions. You can't use Bridge and iPhoto together. Metadata added via bridge will cause problems with iPhoto. To use Photoshop or PSE with iPhoto:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Problems installing Flash player on Mac running Yosemite. [was: Help please?]

I am trying to install the latest version of flash player and it is not working correctly. When I click on the installer it gives me a window full of code. If I try to open the installer through disk utility I can click on the installer and type in my password. After that the installer window comes up but there is nothing on it. It is just a blank grey screen. I have a mac and am operating yosemite.

Hello,
I am not familiar with the behaviour you are experiencing. Are you using the shim installer or the full installer (shim installer is about 1.6 MB in size, while the full installer is about 14 MB in size)?
Please provide a screenshot of the installation window with the code using the instructions here, How to share a document.
Maria

I am trying to update i Tunes to new version i get a message saying iTunes has an invalid signature and will not install.Any help please.

I am trying to update iTunes to new version .
When it goes to install i get a message saying iTunes has an invalid signature and will not install.
Any help please.

Go directly to Apple link to download
http://support.apple.com/kb/DL1426
Select "Save" instead of "Run". Once downloaded, double click the iTunesetup.exe to install.

Trying to Install Bundle 13 please send help

How do I REALLY install Bundle 13?? in Photoshop Elements
Carla Messinger asked5 days ago, still hoping for an answer. ANYONE-ANY IDEAS?
I have spent the better part of the week downloading & getting no where. I've spent 10/21, 10/22 & 10/27 trying to get Chat help to no avail. I have at least 1 case number # 0186024139 but no one to give it to.
10/19 I first did the download with Akamai, it took hours, then "Installer failed to initialize. Download support adviser”. When I click & go to the page it said the support adviser is no longer available!
10/20/14 I did as I was told & went to the download trial http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en&promoid=DJDV B, left the computer on all night downloading the Elements bundle, using the older installer, only to discover once again the "Installer failed message" and I already know that the support adviser is no longer available!
So what do I do???? I read through some pages on trouble shooting, I don't get error codes. PLease give me some ideas to try. Thank you for your time!

Be sure you are removing any bits of the failed installations, then try downloading from here:
Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
It's an adobe-sanctioned site, but you must follow the Very Important Instructions, even when they don't seem right.

My phone got stuck while trying to update! help please.

I was updating my 5c on my computer and it is totally stuck. Said an unknown error occured. Do I unplug phone from computer and restore from icloud? help please. tia!

Have you tried any troubleshooting?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
Restore: Connect your iPhone to iTunes on your computer, backup, and then select Restore to Factory

Nonscript Version 2.6.8.1 is that an add-on that should be installed? I have tried to install it? Please help! Thanks-Stacie

I tried to install Nonscript Version 2.6.8.1 - because i was having trouble with my Facebook-I went to the internet and that was one of the solutions and I was wondering that was a good one or not??? If so can you help me finish installing and telling me how to use. If not what is my next step. Thanks you-Stacie

NoScript is a great tool: it blocks all scripts on a site until you approve the server (either temporarily for the rest of your session, or permanently). It does require a lot of training, because when you arrive at a site, lots of stuff won't be working until you approve it, but you can be more confident in following links that bad things are less likely to hit you instantly.
I'm not sure how NoScript would help you on Facebook. What is the problem you're trying to fix?
One issue that has come up in Firefox 23 and newer is that some games in Facebook are not embedded using a secure URL, so they appear blank. In that case, a "shield" icon appears in the address bar to the left of the URL. This article has more information: [[How does content that isn't secure affect my safety?]]

I think I killed my Mac!

Ok, first you need to know that I am “Not” a Mac guy, (I want to be though) and my Boss gave me a G4 Imac PowerPC to take home and learn on. Here at the office he gave me a G5 with 10.4.11 on it. Anyway to make a long story short, I took the little Imac home and was playing around with it and I noticed that even though I had an admin account on the computer I did not have ownership. So I decided to just reinstall the computer and have a clean start. Now you have to understand that I have been an IT engineer for 17 years and never really had much to do with Mac’s other than networking them into the Windows environment. So there I was thinking “well how hard could this be” and I attempted to wipe the drive using the disk sets Matt (my boss) gave me. He had given me 2 sets one box has a big blue X on it and reads version 10.0 the other box has another big X on it but the X has a Leopard skin on it and reads 10.2.3. So I put the blue X disk in thinking (from what I read) that you should use the original disk to wipe the computer. We it would not boot to the disk (yes I held the C key) I tried several times with both disk sets to get it to boot. Finally I decided that this was stupid and I was just wasting time, so I took the computer apart and pulled the drive out and connected to my big PC and formatted the drive. I was thinking that the Mac disk would see a clean drive and boot right into the OS so I could reinstall. This was not the case, in fact it did nothing but flash a little folder and a question mark. By now I am sure you all are laughing pretty hard but please try to understand that I am only now learning how a Mac works and believe me when I say they are very different from PC’s. Can someone please tell me how to fix this?
Thanks for your time, I am really impressed how well Mac’s work and wish I had started using them years ago. (but that’s another story)
Have a great day,
Mike,
Message was edited by: Eagle77

Wow, you really have to let go of some of those IT engineer habits. You don't have to rip the disk out to get a new OS on it. But I know the feeling when you're trying to get something done and things don't work as expected, and you're trying to use you acquired PC skills on the Mac.
The question mark simply means that the Mac can't find a bootable partition, so it's no indication that you killed it! Mac and PC use different partitioning schemes, so repartitioning on the PC (which I assume you did to be able to format the disk) will not work.
As an alternative to the c key, try d (for dvd), or alt (which brings up the boot menu, takes some time though). Also, you have to press that key as soon as you hear the chime, and keep it pressed until you see a reaction. The Mac won't start beeping at you for doing that.
Those disks are ancient, btw. The current version is 10.5.2, that's three major OS versions more recent. To get started, those should work, but I wouldn't try to do any development on such an old system.

HELP! I think I killed my Mac!

I have a Mirrored door, 1 ghz dual, G4 that I bought new in 2002. I recently needed to do some upgrades and I think I exceeded it's capacity and fried it!
I recently upgraded (a month ago) to 2 ghz of ram, added a 20" LCD monitor, and added a 4th internal drive 2 nights ago (500 ghz ATA, joining my 2 old 80 gig drives and a 20 gig drive). The new HD was added in desperation when my external 230 gig drive went down with all my UNbacked up files on it. I was able to getthe drive working again and desperate to get everything on all my drives backed up. Finished backing everything up to the 500 yesterday morning and everything seemed fine... then last night I was reading email and suddenly my screen went blue and wouldn't come back. I restarted and at first the power wouldn't even come on... or the button lighted up and then died out before the start up tone. I thought maybe the power supply couldn't handle the load, so after letting it cool down for a long time, I unhooked 2 of the internal drives... leaving my startup and 500 gig running. This time the power came on, start up sound played and the button stayed light (and I could hear fans), but the monitor stayed black. I turned the monitor on and off and got the little "analog / digital" box in the upper left corner for a couple minutes and it seemed like the screen lightened a tiny but, but then it gave up and went black again.
Soooo... is my mac dead... the motherboard fried... or could it just be my graphics card? How can I tell?
I'm in the middle of several huge deadlines and need to resolve this NOW... if it can't be fixed today I need to buy a new Mac immediately, get everything installed and get the deadlines done by Monday even if I work all day and night through the weekend, so I'd really appreciate advice ASAP.
I have every reason to believe my data is intact... but if I get a new Mac, is there anyway to move my internal drive to the new Mac so I don't have to reinstall all of my software or is that just an exquisite form of suicide?
If I get a Mac Pro (w/intel processor) will my regular Mac OSX software still work ok? Or Should I go for a G5 machine for convenience?
HELP!
G4 dual 1Ghz, Mirrored Door Mac OS X (10.4.7)

Welcome to Apple Discussions!
Unfortunately this goes to prove why backups should be external, not internal. Neither G5 nor Intel Macs support ATA/IDE drives directly. They use the new SATA technology. However, a Firewire/IDE hard drive case will let you use the old hard drives on a new Mac. The G5 Mac has better support for Mac OS 9 applications, though not as good as a non-Firewire 800 Mirror Dual G4 (the Firewire 800 Dual G4 only could use Classic and couldn't boot Mac OS 9), and the Intel Macs have no support for Mac OS 9 at all. In addition if your applications have no Universal equivalent they may run slower on an Intel Mac than a G5 as my FAQ explains:
http://www.macmaps.com/macosxnative.html#INTEL
Macmaps will be down briefly today for an upgrade.
If once you connect the old hard drives you aren't able to see them on the new machine, you may want to use some of the tools on my backup FAQ:
http://www.macmaps.com/backup.html
and directory FAQ:
http://www.macmaps.com/directoryfaq.html
In the worst case scenario you may be forced to use a data recovery firm.
Good luck in retrieving your data!

My macbook was runnig slow so i turned it off using the power button i then tryed to turn it back on and it turns on stays at the load screen with the apple with the loading sign spinning and a bar under that then my mac (late 08) turns off help please

Help please

Reinstall OS X using one of the following. The first is for Snow Leopard and the later for Lion/Mountain Lion.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Updated to Mavericks. Now theres tons of activity in my terminal and my activity monitor doesn't seem normal. I want to think someone's hacking me, but i need experienced help please!

I spent all night trying to fix this. It seems to me that someone has been trying to hack into my system with all of the random codes/lines in my terminal and i have all of his foreign IP addresses. And now i get this strange message that popped up in my terminal. Idk what it entirely means? I would very appreciate if someone could just walk me through this. Thank you very much.
First time poster. I have Macbook Pro. OSX. Just downloaded the new mavericks. I'm i have my firewall on. I stay secure. I run Netbarrier, Virusbarrier, IdentityScrubber.
I know something is a little odd or just doesn't make since about my activity monitor. Then my WiFi was hacked last night and this person was writing tons lines of commands/codes that i found in my terminal and my activity monitor doesn't look normal, and I've only been a mac owner for about a year now and i'm learning more and more but while trying to figure out what was going on this message popped up which concerned me the most. Any help would be most appreciated, thanks guys. I have my terminal full of his foreign ip addresses i noticed, and a lot of other commands and lines he wrote out that i definitely did not type myself. Can anyone give me a hand on this? Thanks
--- 192.168.1.103 ping statistics ---
10 packets transmitted, 0 packets received, 100.0% packet loss
Extol:~ FBI$ who
FBI      console Nov 7 02:14
FBI      ttys000 Nov 7 04:33
Extol:~ FBI$ whois
usage: whois [-aAbdgiIlmQrR6] [-c country-code | -h hostname] [-p port] name ...
Extol:~ FBI$ whois 192.168.1.103
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
#     "n 192.168.1.103"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.1.103?showDetails=true&showARIN=false& ext=netref2
NetRange:       192.168.0.0 - 192.168.255.255
CIDR:           192.168.0.0/16
OriginAS:
NetName:        PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle:      NET-192-168-0-0-1
Parent:         NET-192-0-0-0-0
NetType:        IANA Special Use
Comment:        These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment:        These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment:        These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment:        http://datatracker.ietf.org/doc/rfc1918
RegDate:        1994-03-15
Updated:        2013-08-30
Ref:            http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName:        Internet Assigned Numbers Authority
RegDate:
Updated:        2012-08-31
Ref:            http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName:   Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail:
OrgTechRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName:   Internet Corporation for Assigned Names and Number
OrgAbusePhone
OrgAbuseEmail:
OrgAbuseRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
Extol:~ FBI$
Extol:~ FBI$ hosts
-bash: hosts: command not found
Extol:~ FBI$ who
FBI      console Nov 7 02:14
FBI      ttys000 Nov 7 04:33
Extol:~ FBI$ whois
usage: whois [-aAbdgiIlmQrR6] [-c country-code | -h hostname] [-p port] name ...
Extol:~ FBI$ whois 192.168.0.0 - 192.168.255.255
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
#     "n 192.168.0.0"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.0.0?showDetails=true&showARIN=false&ex t=netref2
NetRange:       192.168.0.0 - 192.168.255.255
CIDR:           192.168.0.0/16
OriginAS:
NetName:        PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle:      NET-192-168-0-0-1
Parent:         NET-192-0-0-0-0
NetType:        IANA Special Use
Comment:        These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment:        These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment:        These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment:        http://datatracker.ietf.org/doc/rfc1918
RegDate:        1994-03-15
Updated:        2013-08-30
Ref:            http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName:        Internet Assigned Numbers Authority
OrgId:          IANA
Updated:        2012-08-31
Ref:            http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName:   Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail
OrgTechRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName:   Internet Corporation for Assigned Names and Number
OrgAbusePhone:
OrgAbuseEmail:
OrgAbuseRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
Whois Server Version 2.0
Domain names in the .com and .net domains can now be registered
with many different competing registrars. Go to http://www.internic.net
for detailed information.
No match for "-".
>>> Last update of whois database: Thu, 07 Nov 2013 13:19:14 UTC <<<
NOTICE: The expiration date displayed in this record is the date the
registrar's sponsorship of the domain name registration in the registry is
currently set to expire. This date does not necessarily reflect the expiration
date of the domain name registrant's agreement with the sponsoring
registrar. Users may consult the sponsoring registrar's Whois database to
view the registrar's reported date of expiration for this registration.
TERMS OF USE: You are not authorized to access or query our Whois
database through the use of electronic processes that are high-volume and
automated except as reasonably necessary to register domain names or
modify existing registrations; the Data in VeriSign Global Registry
Services' ("VeriSign") Whois database is provided by VeriSign for
information purposes only, and to assist persons in obtaining information
about or related to a domain name registration record. VeriSign does not
guarantee its accuracy. By submitting a Whois query, you agree to abide
by the following terms of use: You agree that you may use this Data only
for lawful purposes and that under no circumstances will you use this Data
to: (1) allow, enable, or otherwise support the transmission of mass
unsolicited, commercial advertising or solicitations via e-mail, telephone,
or facsimile; or (2) enable high volume, automated, electronic processes
that apply to VeriSign (or its computer systems). The compilation,
repackaging, dissemination or other use of this Data is expressly
prohibited without the prior written consent of VeriSign. You agree not to
use electronic processes that are automated and high-volume to access or
query the Whois database except as reasonably necessary to register
domain names or modify existing registrations. VeriSign reserves the right
to restrict your access to the Whois database in its sole discretion to ensure
operational stability. VeriSign may restrict or terminate your access to the
Whois database for failure to abide by these terms of use. VeriSign
reserves the right to modify these terms at any time.
The Registry database contains ONLY .COM, .NET, .EDU domains and
Registrars.
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
# Query terms are ambiguous. The query is assumed to be:
#     "n 192.168.255.255"
# Use "?" to get help.
# The following results may also be obtained via:
# http://whois.arin.net/rest/nets;q=192.168.255.255?showDetails=true&showARIN=fals e&ext=netref2
NetRange:       192.168.0.0 - 192.168.255.255
CIDR:           192.168.0.0/16
OriginAS:
NetName:        PRIVATE-ADDRESS-CBLK-RFC1918-IANA-RESERVED
NetHandle:      NET-192-168-0-0-1
Parent:         NET-192-0-0-0-0
NetType:        IANA Special Use
Comment:        These addresses are in use by many millions of independently operated networks, which might be as small as a single computer connected to a home gateway, and are automatically configured in hundreds of millions of devices. They are only intended for use within a private context and traffic that needs to cross the Internet will need to use a different, unique address.
Comment:
Comment:        These addresses can be used by anyone without any need to coordinate with IANA or an Internet registry. The traffic from these addresses does not come from ICANN or IANA. We are not the source of activity you may see on logs or in e-mail records. Please refer to http://www.iana.org/abuse/answers
Comment:
Comment:        These addresses were assigned by the IETF, the organization that develops Internet protocols, in the Best Current Practice document, RFC 1918 which can be found at:
Comment:        http://datatracker.ietf.org/doc/rfc1918
RegDate:        1994-03-15
Updated:        2013-08-30
Ref:            http://whois.arin.net/rest/net/NET-192-168-0-0-1
OrgName:        Internet Assigned Numbers Authority
OrgId:          IANA
RegDate:
Updated:        2012-08-31
Ref:            http://whois.arin.net/rest/org/IANA
OrgTechHandle: IANA-IP-ARIN
OrgTechName:   Internet Corporation for Assigned Names and Number
OrgTechPhone:
OrgTechEmail
OrgTechRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
OrgAbuseHandle: IANA-IP-ARIN
OrgAbuseName:   Internet Corporation for Assigned Names and Number
OrgAbusePhone:
OrgAbuseEmail:
OrgAbuseRef:    http://whois.arin.net/rest/poc/IANA-IP-ARIN
# ARIN WHOIS data and services are subject to the Terms of Use
# available at: https://www.arin.net/whois_tou.html
<Personal Information Edited by Host>

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

I think I killed my Mac, trying to install XP - Help, please!

Similar Messages

Maybe you are looking for