I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge
I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!
- If in recovery mode the screen will have an iTunes logo with an USB plug.
- Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
- If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Similar Messages
-
ipod5 went dead , then i bought a new charger and its still not turning on ... it was working perfectly fine. i had it since may
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Ipod touch stuck in recovery mode and will not restore. error code 3194
ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help
Hi @rchangel - Thanks for the ideas...
Yes - it won't let you install the 32 bit version on a 64 bit machine.
I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
I want Apple to recognise that there is a problem, and then I want them to fix it. -
My ipod touch is in recovery mode and I don't want to restore it
My ipod touch is in recovery mode but I don't have my photos, apps, videos backed up. How do I keep my stuff without restoring it?
If this program will not get it out of recovery mode (very doubtful) you will have to restore and erase the iPod.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
When my ipod touch is in recovery mode (when I try to re-store it) the itunes page sayes the website has been timed out and so it won't re-store. There is a limited time, whilst restoring the ipod, it lasts for approx 5 mins, then asks to start again all over again. Can anyone please help me?
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw. -
My iPod touch is in recovery mode, how do I get it out of this?
My daughter's iPod touch is in recovery mode (we know this by the code it gives us when she plugs it in to the computer), how do we get it out of this? We have tried resetting by holding down the on/off button and the other button on the bottom front of the iPod for 30 seconds to a minute and nothing happens.
Two ways to get the iPod Touch out of recovery mode.
From iTunes click "Restore" this will download the latest iOS for your iPod Touch and install it.
Second way is to press and hold both the home button and the sleep button for around ten seconds and release them when the Apple logo shows on the screen. -
My Ipod touch is in recovery mode but when I go into Itunes to restore it, it will only stay connected for a few seconds then ejects itself from itunes. How do I keep my Ipod connected long enough to go through the restore process?
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service. -
I have tried to reset my ipod and everything but yet its still not turning on?
I have tried to reset my ipod and everything but yet its still not turning on?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I have an 1st Generation Ipod Touch stuck in recovery mode.
I have an 1st Generation Ipod Touch stuck in recovery mode. Error message shows "The Ipod "Ipod" could not be restored. An unknown error occurred (1). No back up.
ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- https://discussions.apple.com/thread/5922457
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
How do i get my ipod touch out of recovery mode......keep getting error message saying ipod could not be restored an unknown error occurred.
Been trying all night to sort out but just going around in circlesI have not seen a solution for that error but try:
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch is in recovery mode n at the same time nt being detected in itunes
my ipod touch is in recovery mode n at the same time nt being detected in itunes
See if placing the iPod in DFU mode will all iTunes to see the iPod so you can restore it.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Next try another computer to help determine if you have an iPod or computer problem.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
ipod touch stuck in recovery mode...try updating says server not available try again later
Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
It could be that the servers are down/overloaded -
Hi My ipod touch is in recovery mode how can i overcome this
Hi My ipod touch is in recovery mode how can i overcome this
Hey good to announce that my ipod touch recovered from Recovery mode when syncd to my newly purchased imac
-
I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button. a 2 week old computer is not supposed to do this! it wastes all its time being so flashy that it just craps out all the time. sometimes i feel like i should have stayed with my virus covered PC. at least when it shut down randomly you could turn it back on, but with the macbook pro, it just keeps restarting itself over and over. need help with this, any answers?
Here's a novel thought. Take it back to the vendor. Should have done that one week ago.
-
I'm running an iBook G4. On occasion, a black and white display appears (in multiple languages) and requires restarting by holding the power button.
What you are seeing is a kernel panic.
Check out the X Lab's article on Resolving Kernel Panics. Maybe something there will help.
Maybe you are looking for
-
I have used Adobe Acrobat 9 Pro for a few years on my old Window XP computer. Now I am switching to WINDOWs 7 (64 byte) and wish to know if AA 9 Pro will work?
-
How to convert character sets???
I need to load a CLOB from a BFile, the BFile is in an (HP-UX) US7ASCII character set and the database is UTF8. I need to load the CLOB using dbms_lob.loadfromfile but can't find any info on how to convert the US7ASCII file into a UTF8 CLOB. HELP!!!
-
Know the Last column of the table
Hello i use vb.net with excel I have a table with a spreadsheet, I want to know the Last column of the table please help me ??
-
Defining new Keywords for the PrinterExtensionSample Capabilities/Ticket
I'm working on a v4 printer driver and I am trying to find a way to define my custom features and options in a namespace so that the Print Schema can write them correctly to the Print Capabilities and Print Ticket xml docs. I haven't been able to fin
-
Does CC recognize plugins such as portraiture and others?