I tried to activate my iphone. i inserted the my sim card into the iphone and when i connect my iphone to my pc to activate it itunes did not recognize it.  please help me.

i tried to activate my iphone. i inserted the my sim card into the iphone and when i connect my iphone to my pc to activate it itunes did not recognize it.  please help me.

are you sure thet the sim card is the sim card from the right service provider ? When and where did you bought it ?

Similar Messages

  • When syncing my iPhone the storage says OTHER what is other and how do you delete it or make it smaller  my 16g phone has 3G of other please help get rid of it

    iitWhen syncing my iPhone the storage says OTHER what is other and how do you delete it or make it smaller  my 16g phone has 3G of other please help get rid of it

    The following has some information that may help: http://osxdaily.com/2013/07/24/remove-other-data-storage-iphone-ipad/

  • Can I insert a SIM card into the iPhone 4S and activate Verizon later?

    I am currently on AT&T right now. My billing cycle ends on October 18th which is 4 days after I should get the new iPhone 4S. I am planning to switch to Verizon so I also know that if you don't activate your phone, verizon will not start the billing cycle (for up to 14 days, after that which if you still have not activated the phone, Verizon will charge you full retail price). So while I wait 4 days for my AT&T billing cycle to be over, can I just stick my AT&T sim card into the iPhone 4S and then use AT&T without having to activate on Verizon? (after 4 days I will activate on Verizon). thank you!

    What, you can't afford to overlap your phone plans for 4 days?
    You will NOT be able to buy a Verizon iPhone 4S and walk out without having it activated on the spot. In addition, you will NOT be able to put an AT&T SIM into a Verizon iPhone 4S. If they treat it like their other world phones, it will only take a SIM issued by Verizon and provisioned for International roaming.

  • I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
    you can download the itunes http://www.apple.com/itunes/ here
    then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
    you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

  • Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz

    Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz

    Verify Step 2 and 3 mentioned in the article.
    http://support.apple.com/kb/TS1538

  • TS1410 I just downloaded iTunes 9 and i do not want to upgrade any further, so when i plug in my iPhone iPhoto recognizes it as a iPhone/camera but iTunes does not recognize it. any help would be appreciated

    I just downloaded iTunes 9 and i do not want to upgrade any further, so when i plug in my iPhone iPhoto recognizes it as a iPhone/camera but iTunes does not recognize it. any help would be appreciated.
    Thanks

    Thank you so much. Guess i just have to upgrade now.

  • How do I update my iOS? I have the iPad 1 and have tried over and over to try and update the iOS version to iOS 5.1, nothing works it will start updating then say that it did not update? PLEASE HELP!!!

    How do I update my iOS? I have the iPad 1 and have tried over and over to try and update the iOS version to iOS 5.1, nothing works it will start updating then say that it did not update? PLEASE HELP!!! P.s I'm running newest version of iTunes.

    Connect your iPad to your computer and let iTunes back up your iPad. After it does that disconnect it and go into your settings under general and under reset and select erase all content. After you do that reconnect to your computer, open iTunes and follow the screen options to set up your iPad as new. Once it is done doing that see if you have the latest version of iOS installed and if it does then either download gain the apps you had before or restore them from the backup made previous.

  • How to insert SIM card into the iPad mini?

    How do I insert the SIM card into the iPad mini?  It is different tray to iPad 3. Please advise. Thank you.

    Hi Try the number 0000 or 1234 If this doesn't work ask for a PUCK code from your sim provider Also try the Passcode you use when you  turn iPad on Its a good think to have a simlock because if you lose your iPhone /iPad someone can use your  Simcard If it's not got a lock on. Cheers Brian

  • Hi i was using safari one day and my ipod randomly shut off it will now not turn back on i tried hard resting and everything else when i plug the ipod into a charger it gets really hot in the left corner and itunes did not recognize

    hi i was using safari one day and my ipod randomly shut off it will now not turn back on i tried hard resting and everything else when i plug the ipod into a charger it gets really hot in the left corner and itunes did not recognize any help will be apreciated thank you

    Try placing the iPodin recovery mode and then try to restore the iPod via iTunes on your computer.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    Next would be to make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem.

  • I'm having a ipod nano which vl b in rectangular shape of 2" and when i connect my iphone's earpods d control keys are not workin. may i know d reason y its nt supporting?

    i'm having a ipod nano which vl b in rectangular shape of 2" and when i connect my iphone's earpods d control keys are not workin. may i know d reason y its nt supporting?

    I can't tell which iPod nano model you are describing.  The EarPods listing at the Apple Store
    http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
    Says (under Compatibility) that iPod nano 4th gen and later are supported ["Requires software version 1.0.3 for iPod nano (4th generation)"].  If your nano is 3rd gen or earlier, it will still work for audio, but some control buttons may not work.

  • IPhone 4S fell on some water, was working but now won't work. I got a replacement coming. Can I use the old Sim card in the new phone if it wasn't damaged? Will I get my pictures and contacts and messages back if it wasn't damaged?

    My iPhone 4S accidentally fell into a very shallow bit of water. The phone was wet, but worked afterwards for a short bit. Now it's not working, so I called and got a replacement phone coming. Same exact phone. Can I use the old Sim card in the new phone without harming anything? I don't know if the sim card got messed up or not, but I had a lot of pictures and messages and my contacts on my phone, and I assume these were on the sim card or am I wrong? I just wan to know if I can use the old sim card if it's still working in the new phone that is coming, as long as there was no damage to it? Thanks

    I think I had it on the iCloud, I just changed computers and had part of my old computer backed up, where are the default iTunes info saved like the pictures and I know my contacts were backed up cuz I kept getting updated stuff that I wasn't sure about, but it was contacts where some belonged to my wife's contacts....but anyway, if the cloud backed up contacts, it should have grabbed pictures too? Like I asked before, if they were backed up to the computer, is there a default iTunes folder they are saved to? I had a crap load of pictures on there that I usually could really access if I was connected to wi-fi. I turned off my data stuff as I only have 4GB and between me and my 2 kids, we seemed to use up a lot of it. My son would play music from Pandora during work, and use up all our data til I limited him to only 3GB, my daughter and I barely used 1GB. Anyway, thanks to everybody that is answering. I thought I might have done good finding the dang sim card, but pointless I guess.
    Ralph - F.Y.I. I would be happy to back up the iPhone if I could turn it on LOL......I am pretty positive I did, but what about Text messages? ANY of those saved too or not? Sorry guys, I don't know a **** of a lot about cell phones, but I do know about memory cards, but not sim cards that act like memory cards or look like them anyway. What is the purpose of a sim card if I may ask a stupid question since they don't hold any data from my phone stuff. I just hope my stuff comes back on the new replacement phone once I get it up and running. Again, thanks to everybody for the edumucation.

  • TS1717 I have iPhone 4s. I downloaded iTunes to my PC and when I connected my iPhone to the PC iTunes showed a message that my device's time limit has expired. So iTunes doesn't allow me to transfer files from my iPhone to my PC .

    I have iPhone 4s. I downloaded iTunes to my PC and when I connected my iPhone to the PC iTunes showed a message that my device's time limit has expired. So iTunes doesn't allow me to transfer files from my iPhone to my PC .

    Carmell-
    When I've had a similar problem, it was because I was accessing the iTunes store from a device I hadn't used before, such as when I upgraded from an iPad 1 to the iPad 2.  It was a little confusing to me until I figured it out.
    All I had to do was use the ID of my existing account and play along with the iTunes store.  As I recall, it asked for my password twice, and the security code from the back of my credit card.  After that, downloads proceeded as before.
    Fred

  • I'm trying to transfer my apps from my iphone to my laptop but it tells me to authorize my computer and when i do it says my account hasn't been used yet what do i do please help

    'm trying to transfer my apps from my iphone to my laptop but it tells me to authorize my computer and when i do it says my account hasn't been used yet what do i do please help

    iTunes menu > Store > Sign In

  • Computer freezes when inserting a USB Bus Card into the slot.

    I use this card as a way to capture video in FCE. I also have 2 external HD's which I use a scratch disks. I have used this configuration in the past and it has worked properly, however now, when I insert my USB card into the slot the computer freezes, has to be shut down, and I get this error message.
    Can anyone tell me what's up? Thanks from Korea!!!
    Daryn
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000014 PC=0x000000000048EE94
    Latest crash info for cpu 0:
    Exception state (sv=0x4263AA00)
    PC=0x0048EE94; MSR=0x00009030; DAR=0x00000014; DSISR=0x42000000; LR=0x0048EE84; R1=0x2C623B20; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0048EE84 0x0048ED44 0x00463C94 0x0048E550 0x002C0CE0 0x002C0AA8
    0x002C1510 0x002C1B1C 0x000A9514
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleUSBOHCI(2.5.5)@0x48d000
    dependency: com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x483000
    com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
    Proceeding back via exception chain:
    Exception state (sv=0x4263AA00)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x42429280)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
    Proceeding back via exception chain:
    Exception state (sv=0x4263AA00)
    PC=0x0048EE94; MSR=0x00009030; DAR=0x00000014; DSISR=0x42000000; LR=0x0048EE84; R1=0x2C623B20; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0048EE84 0x0048ED44 0x00463C94 0x0048E550 0x002C0CE0 0x002C0AA8
    0x002C1510 0x002C1B1C 0x000A9514
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleUSBOHCI(2.5.5)@0x48d000
    dependency: com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x483000
    com.apple.iokit.IOUSBFamily(2.5.9)@0x462000
    Exception state (sv=0x42429280)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPCModel: PowerBook5,5, BootROM 4.8.6f0, 1 processors, PowerPC G4 (1.1), 1.5 GHz, 2 GB
    Graphics: ATI Mobility Radeon 9700, ATY,RV360M11, AGP, 128 MB
    Memory Module: SODIMM0/J20STANDARD, 1 GB, DDR SDRAM, PC2700U-25330
    Memory Module: SODIMM1/J23REVERSED, 1 GB, DDR SDRAM, PC2700U-25330
    AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
    Modem: LastDash, UCJ, V.92, 4.0, APPLE VERSION 2.6.6
    Bluetooth: Version 1.7.14f14, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
    Parallel ATA Device: MATSHITADVD-R UJ-825, 565.88 MB
    Parallel ATA Device: Hitachi HTS541080G9AT00, 74.53 GB
    USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
    USB Device: Kensington PocketMouse Pro, Kensington, Up to 1.5 Mb/sec, 500 mA
    FireWire Device: 1394 Storage Front Panel*, Maxtor, Up to 800 Mb/sec
    FireWire Device: LaCie d2 Extreme LUN 0, LaCie Group SA, Up to 400 Mb/sec
    Powerbook G4   Mac OS X (10.4.9)  

    Bad card

  • Can I use a CDMA (VZ) iPhone 6 with a GSM SIM card outside the US?

    I'm planning on purchasing my first iPhone--a 6. I'm debating between Verizon (VZ) and AT&T and understand that VZ uses CDMA and AT&T uses GSM. I'm hoping to have a phone which I could use a local wireless carrier's GSM SIM card outside the US if I'm traveling. I've done this with unlocked GSM phones in the past and would like that option in the future--but I'm wondering if I were to get a VZ (CDMA) phone if that'd be possible? Likewise, if one's outside the US do you have to use an unlocked phone for a local wireless carriers's GSM SIM to work?
    Thanks in advance for your response!

    That is correct.
    AT&T will unlock a device under the following circumstances:
    The person requesting the unlock code must be one of the following:
    A current AT&T customer
    A former AT&T customer who can provide the phone number or account number for the account
    The AT&T Mobile Device was designed for use on the AT&T wireless network.
    The AT&T Mobile Device has been paid for in full.
    The AT&T Mobile Device has not been reported lost or stolen.
    You're allowed the following number of device unlocks:
    Current customers are allowed up to five device unlocks per account, per year.
    Former customers are allowed a total of five device unlocks per former account.
    http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=z2ZOyDeJX0P

Maybe you are looking for

  • Receiver File Adapter: FTPS Error

    On sending a text file to a trading partner the log in the communication channel shows the following: Connecting to FTP server - success Write to FTP server - success Transfer: "TXT" mode - success Exception caught by adapter framework:connection tim

  • Image preview (thumbnail) help request

    I'm a recent convert from PC to the new imac *LOVE IT!* However, I'm very accustomed to the beautiful little option in windows to preview thumbnails of image files within their folders, WITHOUT opening them in a program to view them... this does not

  • Routine is not configured in pricing procedure

    hi, following is the issue I received but i am confused : 'zznetwr' is field for 'Net value before promotion' is set in formula 622 which is not configured in 'zperga' pricing procedure. above is the issue I received but i am confused because when i

  • Exporting grouped shapes as an image

    I have grouped several shapes and text in a single graphic and would like to export into Pages as an image (jpg, gif, whatever). Is this possible? The only way I can figure is to export the entire slide but that is not really the same.

  • Can I have JavaScript in an XSLT stylesheet?

    I posted this first on the Dreamweaver forum, and it was suggested that I post here instead... I have two related (I think) problems. I am using Dreamweaver CS4 in Windows XP, Service Pack 3. I have created an XSLT stylesheet that transforms a simple