I tried to install a Seagate Momentus XT into my 2008 Macbook Pro and now I am getting that flashing 'i' folder... help?

and when I went to re-install the original drive, same error!

thanks!
i did get the machine to boot from both HDDs via USB
this is my first time posting in a 'help' forum.... thanks a lot for the advice!
you guys are awesome!

Similar Messages

  • I left my headphones into my new macbook pro and now there is no volume through headphones or without. I have tried to reset the audio port and it is not on mute. Any ideas?

    I left my headphones into my new macbook pro and now there is no volume through headphones or without. I have tried to reset the audio port and it is not on mute. Any ideas?

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers / Headphones
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • I installed Mountain Lion on my one-year-old MacBook Pro and now the fan runs every time I use it.  That very seldom happened before.  Does Mtn Lion ,ake it work harder?  If so, can I go back to the old OS for some peace and quiet?

    This is my first time trying to post a question so I'm not sure I did it correctly...

    Hi JoeyR.  Well, according to this link at the Apple Store, OS X Moutain Lion became available in July and I downloaded it for $19.99.  I figured I would do that before renewing my Norton security SW.  Are we talking about the same thing?
    http://www.apple.com/osx/

  • I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?

    I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install

    I have a problem with Imovie. Just brought an macbook 15 retina , iLife install and Imovie was working. I than did a data migration from my old macbook pro and now it crashes on start up. I tried to re-install from app store but no option to re-install, just installed and it greyed out.

    Well, my two-month-old MBP has no qualms about booting from a no-name external USB HD I put together...
    Given that is is a common point of failure, I would imagine a large Apple Store should keep a stock of HD's on hand.
    Now since you're a bit desperate and the genie pops up til Saturday and you seem to be the enterprising kind, let's try an experiment: if you have room enough in the external HD and assuming it isn't a Time Machine volume, why don't you plug it in, stick the Install CD and see if the installer lets you select the external drive as the install target. If you can install Leopard on it, on top of the backup without reformatting, and the Mac can boot from the drive afterwards, at least you would have some functionality restored and would be able to pull your stuff from the internal HD. Apple says booting from USB drives is not supported but that does not equate to not possible; some brands do work. Risks? Always. You can always lose your backup. Like I said, a challenge for an enterprising gal....
    Next time around, consider having a bootable external clone at hand for rainy days. I keep three myself...
    P.S. Since I'll be in the Dallas-FW area in late June, I can volunteer with the confetti....

  • I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes

    I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes. Apple support suggested I reset my password so I did that and still the problem is occuring. Itunes and the app store are working normally on my ipad and iphone. Does anyone know what the problem is. The new disk was installed in France coz I am on holiday there. could there be something I need to change in my settings? I need help urgently as I am trying to finish an assignment and need to be able to access and download from icloud.

    Hi Stacey,
    Thanks for visiting Apple Support Communities.
    You may find the tips in this article helpful with resolving the error you're seeing:
    iTunes Store: "An unknown error occurred (-9808)"
    http://support.apple.com/kb/TS2753
    Best,
    Jeremy

  • Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up.  How do I get it to a point that I can delete program?

    Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up.  How do I get it to a point that I can delete program?

    Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
    Clinton

  • I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

    I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

    Apple Menu --> About this Mac.
    Mylenium

  • I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

    As the title says.
    I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
    I don't want to restart it because im scared that something might go wrong.
    operating lion

    LimitLess- wrote:
    Hi,
    I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
    Thanks
    I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
    That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

  • Unfortunately I had Install My Mac os x 5 times on my new macbook pro and now....

    Hello! Guy's,
    Unfortunately I had Install My Mac os x 5 times on my new macbook pro and now.... My MacBook Pro Is Getting slower ... Please help me...!!
    I think I'm doing any mistake... I am sure am installing my mac properly but .... Should we have to install any patch after installing mac os x..??? Please help.... My mac is getting slower and slower...!!!! And I'm Also getting problem in connecting to network... I am using wi-fi ..!! and sometime my network get disconnect .... Please help..!!!!

    @Carolyn Samit
    Mate Actually...!!! I had Heard that We Can Intall Windows 7 On These New macBook pro ...!! nd Because Of Installing Windows 7, I had Installed Mac os X Again An  Again..!!!  And Now ..!!! Everything Is getting Slower And Slower...  What to Do..!! now I Never going 2 install .. Windows 7 on my macbook pro...!!! but for now.. Please Help me... Please.... I want that incense speed Back..!!!! Please help..>!!!!
    Thanks In Advance
    Sanchit Shokeen

  • I installed 10.6.8 from 10.6.6 on my Macbook Pro and now can't open Safari-think it's something to do with the Intego anti-virus software. Reverted Intego software back to default state and now computer just boots ups up slowly and can't access a thing.

    I installed 10.6.8 from 10.6.6 OS on my MacBook Pro and have not been able to open secure sites on Safari.  Think it has something to do with the Intego Anti-virus installed.  Tried restoring Intego to default status and now my Mac barely boots up and does nothing else but spin.  Ugh.  Has anyone had similar issues and if so, were you able to resolve?  How?  Thanks, 

    1: Backup your user files folders of Documents, Music, Pictures etc., to a external powered drive (not TimeMachine) and disconnect.
    2: Insert the 10.6 installer disk and reboot holding c
    3: Simply reinstall OS X without erasing the drive, it will overwrite the installed version of OS X and the root level software, but leave your Applications folder contents (expect Apple bundled programs) and user files alone. (but backup anyway in case it fails)
    4: Reboot and the Integro is gone out of your system, but there may still be something laying around in Applicaitons to delete. Use Software Update to get up to date.
    5: You don't need anti-virus on a Mac, Apple provides it already for you sight unseen.
    6: If you Software update, the bad certificate issues are pulled, thus are not a threat.

  • I am trying to install windows on my mac. what is an iso image and how do i get it.

    I have windows 8 on a cd. and I am trying to install it using bootcamp. I have no idea of what, where I find an iso image ??

    What exact version of windows

  • Tried to install OS X Mavericks.  It wiped my mac clean and now I can not re-install Mountain Lion.  Help?

    Lost my previous thread. I have a Macbook Air.  Installed Mavericks but it shut down the machine, on opening it upi all of my files etc were gone.  Tried to use external back up to restore but to no avial.  Now trying to reinstall Mountain Lion.  Can anyone help me?

    I could not report the crash as my lap top was out of order. So now it's working. Should I report the crash and to whom? Do you have any link for that?

  • Error Code 6 on trying to install a previously bought CS4 from an older Macbook Pro to a new iMac.

    Iam trying to install my Photoshop CS4 onto my new iMac that I used on an older Macbook Pro that no longer works but when I try to install it I get an error code 6. Any help is greatly appreciated.

    Murray,
    These illustrate what I'm experiencing.
    Image #1 - Shows the template file open and the place it is and always has been saved.
    When this template is saved DW does not offer to update the site pages that use this template as expected.
    So I attempt to update the pages via Modify:Templates:Update Pages and this is where I encounter the 'error -43' message.
    You asked for a file. Please be more specific as to what file or files. Presume you'd want the source code in a text file, correct?
    I appreciate you time and interest.
    John

  • Trying to instal a new hard drive in my old macbook pro laptop but it wont recognize the disk to install osx

    I want to give my old macbook pro away as a gift & bought a 250 GB SATA internal hard drive and installed it, then popped in the osx install disk.  When I start it up it begins well, but when it gets to the point to install the software on the drive, the drive simply doesnt show up on the menu to be chosen to instal the software.
    The cables are on right and should be working well, so I don't understand why this brand new, never used hard drive doesn't allow the software to mount.  Thanks for the help! 

    jcbarker wrote:
    It's a toshiba 250 gb.  The place I bought it from said it was, but as I type this, I'm startting to think it's not.  Could I simply take it out of the laptop, put it into an enclosure and format it using another mac? 
    Would that work or is there a better/ different way?  Thanks again.
    How about an exact model number, there are a lot of 250G Toshiba drives, but even if it is formatted for Windows it should not be necessary to remove it just to format it.
    Can you see the drive in Disk Utility? (Applications>Utilities>Disk Utility)

Maybe you are looking for

  • How to use "access control - administrator" in SQL

    I have a report with checkboxes to select records for delete. Non administrators can only delete a subset of the records. So for some of the records I would like to hide the checkbox if the user is not an administrator. The checkboxes are created in

  • Hdmi was working fine , now I am getting no signal, please someone help!!

    I Moved my tv and Macbook pro to another room and now my Hdmi will not work. It keeps saying no signal. Please help!

  • Problems creating invoice from order (DI API and SBO)

    Hello all! I´m getting various tax problems using the following code to automatically create invoices from existing orders. For Each currentKey In arrABEntrys   objInv = objCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)   objAB.GetByKe

  • Question about "SetWaitCursor(1);"

    Hi Currently I study the program below and have some question needed advice: A) What is the reason  to need "SetWaitCursor(1);" on the below code? B) Does it cause a run time delay on the whole program?  C) can we remove " SetWaitCursor(1);" from the

  • Shochwave Flash

    Warning: Shockwave Flash is busy or quit responding. Not able to update, because it keeps freezing and won't let me run in Safe Mode. How do I fix? Having problems since around Oct. 8th.