I tried to install an update of my ios via itunes and my phone was totally cleared. right now im trying to activate it again, its not working. what can i do?
i tried to install an update of my ios via itunes and my phone was totally cleared. right now im trying to activate it again, its not working. what can i do?
You will need to restore the software via the following procedure:
Turn your device off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your device and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a device in recovery mode. Now you can restore to factory settings.
Similar Messages
-
Plz i need your help , i updated my iphone 3G for ver6.0.1 but now its not work , what can i do ??
Dear Sir/Mom
now i updated my iphone 3G for the version 6.0.1 but now its not work , what can i do plz help me
thank youWhat doesn't work?
Has the iPhone been jailbroken?
Do you have the app Cydia on your iPhone? -
my username does not allow me to start my mac book air. what can i do
Reset your user password. If you are using Lion, hold down the option key when you hear the starting "bong". then select the recovery disk. Then follow the instructions as alid out in the second arrow bullet on this document.
-
My iPad is trying to install an update of Pages for one week and doens't get it. Every time it begins a message " it was not possible do update now" shows up. What should I do? I can't lauch Pages till now.
The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562
-
Everything is updated!! iPhone, iPad, iTunes and MacBook Pro... All I am trying to do is drag content from my iTunes Library to the devices. iTunes gets stuck EVERY single time! What usually triggers the Non-Sense is when I am adding a 2nd file!
Why does iTunes SUCK??
1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
If you do a 2nd item the other items stop loading and never continue!!
This is so BAD, I don't understand how they don't have this fixed yet!!
Please tell me I am not the only one!!
...and If I am tell me how to fix it!
Very appreciated,
JoeEverything is updated!! iPhone, iPad, iTunes and MacBook Pro... All I am trying to do is drag content from my iTunes Library to the devices. iTunes gets stuck EVERY single time! What usually triggers the Non-Sense is when I am adding a 2nd file!
Why does iTunes SUCK??
1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
If you do a 2nd item the other items stop loading and never continue!!
This is so BAD, I don't understand how they don't have this fixed yet!!
Please tell me I am not the only one!!
...and If I am tell me how to fix it!
Very appreciated,
Joe -
I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?
Run Software Update to get to 10.6.8 and update Java.
-
I have iphone 4s and i updated it for iso 6 , the icon passbook its not working what shall i do
I have iphone 4s and i updated it for iso 6 , the icon passbook its not working what shall i do, please note that i live in united arab emirates
Hae you tried to do a hard reset of your phone? This will not lose any data. Hold the sleep/wake button and the home button until the phone turns off ignoring any slide to power off messages. Then power the phone back on.
-
my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?
How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.
-
i was trying to sync my iphone4 with itunes and my phone was upgraded to ios5 version, i now cannot make call on my iphone because my sim cannot be recognised again. what do i do plsssssss.
As peter says, this is evidence that your phone was previously hacked and was re-locked by the upgrade.
ONLY the carrier it is locked to can unlock it. There is nothing else we can suggest. -
i set up my moms new desktop mac a couple of weeks ago and i did the same thing i tried to do on my macbook but its not working, yet it worked on my moms mac. so i dont know what to do. i moved the file from the hard drive to the itunes folder. then went to itunes, file add to library and clicked on the folder but nothing happened. so i went back and moved the music folder to the automatically download to itunes folder and it didnt work. i even tried drap and dropping the folder directly into the itunes library. it went blue so i knew you could drop it in, but nothing happened. i dont understand how it worked on my moms mac but not mine.
FIle>Add To Library. Select all the music on your external hard (Select all the artist folders) drive and hit OK. This will add all the music to your new Mac's iTunes library file.
Good luck and good choice on moving to the Mac -
I was using my Macbook when it suddently shut down, I was updating the operating system so I had the charger on even though there was still 90 percent of energy. I tried to turn my Mac several times but it doesn`t turn on, also the green light of the charger is not working, it`s looks like the charger is dead too. What`s wrong with my Mac?
Try resetting the SMC.
MacBook and MacBook Pro with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer
To reset the SMC on newer Mac portables with a battery you cannot remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
tryed updating to new software then failed and lost everything now stuck on recovery and wont repair hope ive not lost everything what can i do
Maybe you could give some information. What error? What iP4? What computer system? What version iTunes? What does "lost everything" mean? All iPhone 4 are under warranty, take to Apple Store they will always help you.
-
How can I get iPhone 4 active again. I was attempting to update to iOS 7 via iTunes, screen is frozen, unable to make or receive calls. Phone has been powered off multiple times, reconnected to desktop PC to restart or disconnect from iTunes, held power button and home key down at same time, still nothing, phone just shuts down. How can phone be unfrozen?
Try and force your iPhone into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Hello
Tried to update to IOS8 last night, backed up Ipad and downloaded IOS8.
It failed to update properly and ONLY gives me the option to restore the Ipad, it won't turn on I have to plug it into Itunes.
When I plug it in and go to restore it immediately prompts the following:
Then:
I click "Restore and Update"
I click next
I agree.
The download starts (weirdly its very slow) during the download I keep getting the first message. A few clicks and the box disappears and eventually the software is downloads (see below).
But it won't allow me to update / restore etc It cycles around these messages.
HELP - I have no idea what to do.
Many Thanks
MTI have much the same problem although my Ipad 2 says its in recovery mode. I have tried to restore and update repeatedly but nothing is happening.
Tom
Maybe you are looking for
-
This is a new occurence and is not tied to the Maverick update. When I close the top of my laptop and reopen it (whether 10 minutes or overnight) and click on the Safari icon - I get my Safari opening screen - but each tab says (Fails to connect).
-
Hello, Couple of points related to Nokia Messaging memory usage. Nokia Messaging stores, by default, 2kb of each message on the device. Even if you have hundreds of emails, they don't take up much space until you start getting into attachments. The d
-
How to close infopath form through code?
Hi All, How to close infopath form through code, thanks in advance!
-
2007A: Exception handling for new ProjectService methods
Normally for other objects the Add() method returns error code and calling the GetLastError you get the description. AddProject(Project) method of ProjectService returns ProjectParams object. So the question is where to get the error code or what is
-
I am looking for documentation on how to set up a series of "split Etherchannel" connections. I believe that this can be done with 802.3ad (LACP), but I need some specific documentation on the subject. In a split LACP environment, an Etherchannel gro