I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted!
I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!
I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps.
Similar Messages
-
My MacBook Pro has been having difficulties at startup. It sometimes locks and doesn't get past the white screen. It has also locked up several times and gotten a green stripes across the entire screen. What is causing this and how do I fix it?
You don't, take it to Apple for repair.
This might interest you if it's too old to fix.
My computer is not working, is my personal data lost? -
I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.
Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same error message. Says Lightroom will attempt to fix the problem the next time it launches but that is not happening. How do it fix this?
Delete the preview cache using your operating system. It is a folder whose name ends with Previews.LRDATA. Do not delete the Lightroom catalog, which ends with .LRCAT
-
i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly" "Error 7". Help, please??
Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
''''''bold text''''''
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Try to disable the hardware acceleration in the Flash Player.
See:
* https://support.mozilla.com/kb/Cannot+view+full+screen+Flash+videos
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html -
ok
Now instead of cycling through them, I'll select a song and it'll play and display artwork from another album. What's going on?? Please, help.
-
After using itunes to restore it i turned my ipod touch on and it stayed on the apple logo for a few minutes then it would change to a spinning wheel on a black screen then the screen would turn white and the process will repeat. I can still put it in dfu mode and recovery mode but they don't help. So hopefully someone in this community can help me. And this all started when i updated it to ios 6.1.3 from 6.1.2. and also my computer and itunes dont recognize it
See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
k when i double click on the fire fox short cut on my desk top or the tab under the start button, my firefox gives me a blank white screen with the phase " new tab" on the top left hand corner as if u clicked for another window. Even though its the 1st window that opens. when i type a website in the search bar it regristers but it just goes to the blank white screen w the new tab phase. i tried to open some of my bookmark sites and still the same thing.. a blank all white page. ive tried re-download the fire fox 6.0 then i deleted my current firefix then re-downloaded it again.. still nothing :(. im currently usaing my interner explore to write this and search the net.
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Bootcamp wont install windows 7 "get a blank white screen"
hi i tried to bootcamp my computer everything was sweet till it goes to restart to start the windows install,when it goes to do it instead of taking the computer to the windows loading thing it is just a blank white screen pls help ive tried installing mutiple times to no avail!
You aren't telling us all the who-what-when-where
the DVD and what version and how most often -
The display on my 80g Ipod is blank (white screen)
The display on my 80g IPod (classic) is blank/ white screen. Can this be fixed?
See Troubleshooting here > http://www.apple.com/support/ipodclassic/
-
trying to install yosemite from lion 10.7.5…when the install gets to the restart it never actually restarts, just gives an error and says try again
Restart the computer manually.
-
My Iphone 4g, won't turn on, I have tried the power button + home button several times and held them for over 3 minutes. It won't even respond to Itunes and I can't restore it because of that. A little water got into it before it completely shut off but it was like little drops.. Please HELPP.
I also have tried to put it in rice and left it there for 9 hours and it still doesn't workA drop or two of water may have been enough to cook it. If it was bad enough to prompt you to put it in a bag of rice, then I'd venture to guess it was more than a drop or two.
Try putting it back in the bag of rice and leave it there for several days.
If that doesn't fix it, then you're more than likely looking at paying for an out of warranty replacement.
Water and delicate electronics don't generally get along well. -
Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens
Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini
Maybe you are looking for
-
Can i use the 'Record' feature in Applescript editor to automate bulk mail
Hi, Is it possible to use the 'Record' feature of the Applescript editor to create a script that will automatically copy a website address into a new email message and then send that email message to everyone in my Friends category from the Address B
-
Hi All, we have to create an iView using NWDS to displays a PDF document generated through a SAPScript or Smartform. Please let us know how to achieve this. Thanks in advance. SAP EP Team
-
Hello When i do a Goods Receipt against Purchase Order which Contains a Purchase Requisition a Simple Mail have to be Triggered to the User ID who raises an Purchase Requisition and Purchase Order. I have maintained a Condition Table for the Plant, C
-
Log out botton in webpages doesn't work
When I log into a secure site and I want to log out the button doesn't work. I have to close the browser to log out. This occurred after I installed the new version 8.0. What is the problem? Should I go back to the previous version?
-
MiniSAP installation error : "main" java.lang.noclassdeffounderror
I am sorry for opening a new thread that might be already somewhere resolved (didnt find it). During instalation of miniSAP I still have error "main" java.lang.noclassdeffounderror ... I have installed j2re1.4.2_08, even system variables are set to C