I tried to to the ios update to my 4S phone. itunes says there was an unexpected error. now my phone is hung on a screen which show a usb cable and an arrow pointing to the itunes icon. i cannot reset the phone, everytime it appears to reboot it comes bac
I tried to update my 4s to the latest ios6. itunes came back and said there was an unexpected error. the screen on the phone is hung showing a usb cable and an arrow pointing to the itunes icon. itunes does not see the phone as being plugged into my computer. I restarted itunes, no difference. I can't seem to reset the phone. It comes up with the apple icon and then goes back to the usb plug screen. I'm totally hosed right now!!!
Error 1604:
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
From Apple Support page >
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Similar Messages
-
My iPod is showing a USB cable with an arrow pointing to the iTunes logo
My iPod is showing a USB cable pointing to an iTunes logo, this happens everytime i turn it on, i can get nothing else. I have
done all the diagnostics and i have reset everything, nothing makes it work. It will not sync to the computer, but i know there is nothing wrong with my computer because i have an iPod nano which works fine. Please help.Hey,
So you plug it into the computer with itunes open and nothing happens?
Make sure your iTunes is upto date and try again.
Jason -
i got the iphone 5 today and plugged it into my laptop to look on itunes and buy some apps. i done this and disconnected my phone from my laptop however the screen is just coming up with a usb cable pointing to an itunes logo and wont go off? iv tried everything and it wont go back to the orginal home screen, just keeps coming up with the usb cable pointing to the itunes logo. please can some one give me advise as iv only just got it today
it has been into recovery mode. connecting to itunes will solve your problem. if it didnt work connect it itunes and restore your iphone.
-
i tried to restart and re download everything and it still is doing the same thing. this keeps happening alot and i have to end up taking the ipod to the apple store to have them erase everything on my ipod to restart it. is there anything i can do at home to fix it
Have you tried to put the device into DFU mode?
To put the device in DFU mode,
1. Connect the device to iTunes
2. Hold both the power button and the home button down simultaneously
3. After 10 seconds, release the power button but leave the home button pressed
4. iTunes should then recognize that the device has entered DFU mode and ask to restore.
I hope that helps.
~Lt. Leviathan -
Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?
This is the solution to your issue.
I wish you the best of luck.
http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU -
When I havent got my ipad connected to a power supply I get an image on my ipad of the usb cable with an arrow pointing to a itunes icon and no matter what you try and do iyt stays on that for a few seconds and then switches off the ipad, connecting it through usb into itunes on my PC (XP) this image says on the screen but I get a message on itunes saying itunes has detected an ipad in recovery mode and mneeds to be restored - when I fire off the restore through itunes after a few minutes it comes back and says it cannot restore and give an error message 1603. I have also repeated the process through my wife's laptop (Vista) and get the same situation -it is an 32GB Ipad 3 purchased last November - any ideas ?
Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Can't connect my ipod toch to itunes!!! It doesn't see it! I use windows 8, don't know if that's the problem. Anyways, my ipod is stuck! Every time I open it, it stays stuck with the image of a USB cable with an arrow pointing towards an itunes icon. but whatever I do, my computer doesn't see it, and neither does itunes. What to do???!!!
The the remaining items of the following, you may have to let the battery fully drain.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
"There was an unexpected error with the request on subscribed calendars (error -1)"
I have been subscribing to my wife's work and home calendars since she started using an iPad mini late December. Suddenly, today, nothing will sync to it. If I try to update, the iCal app fails to pick her work calendar, saying "There was an unexpected error with the request on subscribed calendars (error -1)." Her iPad has the current iOS.
I tried re-sending the 'subscribe to my calendar' email (with a link) from her iPad, but trying to open that link results in the same message.
Our computers all run Mac OSX 10.6.8 and iCal 4.0.4.
I don't really know if my iPhone 4S is picking up her calendar info. I have never been able to see if/how an iOS retrieves cloud data when accessed.
Any help appreciated.You will find that the calendar's URL bevins with ical.mac.com. The mac.com domain was one of MobileMe's website hosting domains, and with the closure of MobileMe none of its hosting works, including the CalDAV server which was used by a number of subscription calendars - mostly third-party but also some Apple ones: you would think, wouldn't you, that at least Apple would be aware of this. In fact a few days ago, following a similar query, I went through about twenty randomly chosen calendars in Apple's list, and only two of them worked. Most of the rest were ical.mac.com ones (there were a few with other servers which had also gone dead).
These calendars are no longer available, and won't be until the authors wake up and find somewhere else to host them. -
My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
hello i have a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.
http://support.apple.com/kb/HT1808
-
HT1414 I Pad is frozen with a picture of a USB cable with an arrow pointing to an icon of itunes
IPAD is frozen with a picture of a USB cable with an arrow pointing to an icon of itunes? Can anyone suggest a fix
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
I plugged my iPhone 4 into my computer with the USB charger cable, and the screen went blank and came up with a picture of the usb cable with an arrow pointing to iTunes....Can anyone help get this fixed????
Connect your iPhone to iTunes and restore or follow the prompts.
-
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
I just received my iPad2 today. When I turned it on it only showed a USB cable and the iTunes icon. What does this mean?
The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer running iTunes (version 10.2 +).
Getting Started guide : http://support.apple.com/kb/HT4053
The iPad manual, which also has a chapter on getting started can be downloaded from here : http://support.apple.com/manuals/#ipad -
My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on and then loses the connection with itunes and at the end of the download it just asks me to restore it again.
Be prepared to lose everything on your iPhone but it should be backed up in iTunes so you can restore from your backup.
Try Recovery Mode... http://support.apple.com/kb/HT1808
Maybe you are looking for
-
How do I sync two different ipods with new iTunes software?
Up until I upgraded to the new software, I was able to quickly and easily sync both my iPods. One is an iPod touch; the other a classic. Now, I can't sync my classic. Any idea why or what I'm doing wrong? This new software, IMHO, is not that intuitiv
-
What is the best way to clean my Macbook Pro screen?
Everytime I have had my Mac in at Vertical IT in St Kilda they clean my screen and my machine which is a brilliant service but I always forget to ask them what they use to do it? I have heard windex may do the trick but doesn't it have chemicals in i
-
XI 3.1 sp2 url path for report folders
In XI R2: To navigate to the report folders we have used : http://<server name:Portnumber > /businessobjects/enterprise115/desktoplaunch/InfoView/main/main.do?objId=0 What is the equivalent of url path in XI 3.1 SP2.. Edited by: senthil gobal on Apr
-
Automating the import / export process in 9.0.2
In Portal 3.0.9.x the export and import were entirely command-line driven tools, so it was possible to automate the process to a certain degree. In 9.0.2 the import/export process is a combination of scripts and manual actions through the Portal UI t
-
Error with detail (Hyperlink)
Hi. I´m using Hyperlink to it shows the detail of a object in a query. I´ve PEP and EBELN. When I click PEP in a query it must open a new query with detail PEP and EBELN. It exists two queries. I´ve promt in the second query to link both object but I