I tried to update firefox secuity this morning and got stuck with Voseran off of Mozilla site

I went directly to Mozilla to update Firefox security settings and ended up getting the Vosteran Browser. I am pretty tech savvy and watched very closely all the stuff it was doing and never saw it coming until I rebooted and there it was. I have taken all the steps to get it removed , even removed Firefox for now. But you may want to look into this.
It is very frustrating , I am using the paid version of AVG Ultimate ant virus and it still got by that.
Tom C

Firefox any version for Windows, Mac OSX and Linux from mozilla.org or by update in Firefox does not come with anything "Vosteran" related.
Just because you see it in Firefox does not equal it must have came with Firefox from Mozilla.
Firefox is however becoming one of the increasingly few applications that is not bundled with any thing questionable like other apps, adware, malware, viruses, trojans etc.
Are you sure it was from mozilla.org as because if you went to a site from a search engine result it could have been a Ad link above the real search results like you can see on Google or Bing for example.
Also download .com aka cnet is a known adware site as they use their own installer to bundle stuff with otherwise what was clean software.
Also if it were true that Vosteran anything was included in Firefox then it would be a hot topic here, at mozillazine forums and tech sites around as anything negative about Firefox or Mozilla tends to get talked about A Lot sadly.

Similar Messages

  • HT4623 I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.

    I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.

    Press the Power button and hold it down until the computer turns off. Restart. Do you still get the same result? If so, then try booting into Safe Mode, then restart normally. A safe mode startup takes considerably longer than a normal one, so don't panic. You will also see a progress bar at the beginning.

  • I tried to Update my Itunes this morning and I now get Runtime Error R6034

    I have tried to Upgrade Itunes this morning and all I am getting now is Runtime Error R6034 can Anyone Help ??

    Am assuming that the upgrade didn't complete which was what happened to me and that now you get this message everytime you start Windows.  I use Windows7
    Apple has published a fix at http://support.apple.com/kb/ts3074.
    In it they suggest the issue may be caused by a bad installation of a version of Microsoft's .NET Framework.
    Find this somewhat preposterous for the simple reason that all was well until the attempt to load the new upgrade of iTunes.  For Apple's suggestion to hold true it can only mean that none of my other applications make any use of MS.NET Framework, which I very much doubt.
    Performed the fix for Windows7 prescribed by Apple, namely downloaded and ran Microsoft's .NET Framework taking the 'Repair' option when prompted.  When Repair completed successfully you have to shut down and restart Windows to make the repaired software available.  Did this and on restart lo and behold the R6034 message appeared again.
    Did a search of the Registry for 'R6034' but not found.
    Being unsure what was issuing the message deleted iTunes and restarted the system.
    Again lo and behold the R6034 message appeared again.
    Had been away from my computer for several weeks, and as the only upgrade actioned since my return was the problem iTunes carried out a Sydney Restore.  This got rid of the R6034 message, everything worked fine, and when I shut down Microsoft automatically reinstalled all its upgrades after the Restore point.
    Then moved to put back the iTunes upgrade prior to the current one, and ITunes stopped me in my tracks by halting the reinstall because "A later version of the program had been installed".
    Appreciate that this doesn't do much for you Barry, but as I see the iTunes upgrade as the problem, I'm hoping firstly that someone from iTunes will read this and firstly, provide more support than it has to date, and secondly, for those who want to pass up on the upgrade allow them to reinstall the previous version of ITunes.
    Cheers.

  • I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

    I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I just downloaded an update to ITunes this morning, and now I am getting an error message saying iTunes can't start because MSVCR80.dll is missing from my computer. What the heck happened?

    I just downloaded the latest update for iTunes this morning, and now I am getting a message saying that iTunes can't start because MSVCR80.dll is missing from my computer.  What the heck happened?

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

  • HT4714 I downloaded a trial copy o final cut pro x. Download was fine and I opened the program and go the editing screen-it looked fine. I tried to open this morning and got error code 600, what happened?

    I opened final cut pro x after the trial download and all was okay. I tried this morning and got the 600 error code message.

    Has the 30 day trial expired?
    http://support.apple.com/kb/HT2237?viewlocale=en_US&locale=en_US
    Andy

  • TS3694 i was trying to update my iphone 5 but it got stuck on itune screen. whenever i try to restore it says error (1669) what can i do. please help

    i was trying to update my iphone 5 but it got stuck on itune screen. whenever i try to restore it says error (1669) what can i do. please help

    Try  these troubleshooting steps.
    If that Article did not resolve it... then perhaps a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required..
    Be sure to make an appointment first...
    Note:
    That error message may be indicative of the Device being Hacked / jailbroken.... If this is the case then you are on your own.
    Unauthorized modification of iOS...
    http://support.apple.com/kb/HT3743

  • I went to update CC desktop this morning and it crashed.

    My CC desktop craned after trying to install an update this morning and now will not install . Gets part way then crashes again and asks me to reinstall .

    Hi Onechobeach,
    If you navigate to: C:\Program Files (x86)\Common Files\Adobe\OOBE
    And Rename the OOBE folder (Make sure there is nothing running from the Creative Cloud Desktop App)
    Then you can try to Redownload the Creative Cloud desktop app, and see if the installation now continues.
    - https://creative.adobe.com/products/creative-cloud
    Hope this helps

  • Recently tried to update iTunes 12.0.1 and got this error message:  The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.

    I recently tried to update iTunes to 12.0.1 and got this error message:
    The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.
    After that, I get:  iTunes did not install properly.  Reinstall iTunes.
    I tried downloading iTunes again (without uninstalling it) and it won't download.
    Any suggestions?

    Thanks so very much, I have been looking for an answer to this for
    almost a week and just thought i'd look again and in 2 minutes my iTunes opened YIPPEE
    I must have installed deleted everything in order at least 15 times
    Is there anyways this cane get pinned to stay at top as it works and save people ploughing
    through post after post which is just asking the same question.
    Off to back up and I Cloud back up and see how it works without sidebar
    again thank you

  • I updated firefox on my laptopn and now it takes FOREVER to open EVERY site and i have run nortons to make sure i don't have a viris. it happened as soon as i did the update

    As soon as I updated firefox, as prompted, it takes FOREVER to open a site, including when i first open firefox. Should I uninstall and then reinstall?

    Hello, could this be it?
    Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality
    http://support.apple.com/kb/HT5559

  • Bought 5 ringtones for my phone...they were working this morning and now they have disappeared off my iPhone

    I just recently got my iPhone. Bought 5 ringtones for the my phone. They worked perfectly until this afternoon and now they have disappeared. Where do I look for them...they are not in "purchased" section

    Settings > Sound > Ringtone > under Ringtones

  • HT204053 I have tried to download iCloud to my PC and am stuck with a message saying I must alter my Outlook Default profile. How ?

    I have tried to download icloud to my PC and amstuck with a message saying I must update my Outlook Default Profile. How ?

    You can not setup a new iCloud account using a PC. You must use an Apple device (Mac or iPhone/iPad) to create the account, then sign into it using your PC.

  • After trying to update the iOS this morning,  iPhone 3GS displays the usb cable needing to connect to itunes

    I followed these directions posted by Pilates-Contrology. His/her tips seemed to work for everyone else.
    Any ideas?
    Did you try this? Found this in several places and it works for me
    1. Quit iTunes.
    2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> Right Click "Command Prompt" -> "Run as Administrator")
    3. Once in the command prompt, type "netsh winsock reset" and hit ENTER.
    4. Reboot your machine.
    5. Restart iTunes.
    Did you try this? Found this in several places and it works for me
    1. Quit iTunes.
    2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> Right Click "Command Prompt" -> "Run as Administrator")
    3. Once in the command prompt, type "netsh winsock reset" and hit ENTER.
    4. Reboot your machine.
    5. Restart iTunes.

    Oddly, I've now fiddled with it a bit more, and I can manage to get the Apple logo up for a short time, but if I let go of the hold button it cuts out again.
    If I continue to hold it, the logo turns into connect to iTunes. I do this, no response from iTunes.

  • HT4061 I updated my phone this morning and now it is stuck with an iTunes logo and arrow pointing to it and a pic of the power cord - the phone was plugged in when I started the update...now I can't access my phone at all

    My phone is plugged in and the screen shows the power cord connector and arrow and the iTunes logo.  I have made sure the plug is in and power on. Touching the screen does nothing. I have turned it off and back on I get an apple pic then back to the iTunes logo pic, arrow and plug....

    I installed new update and have had the connect to iTunes all day.  I got home connected to iTunes and it said my phone couldn't be updated it needed restored to factory settings.  I was reluctant to lose everything so I ignored this and clicked update.  After it installed it said to restore again.  Again I ignored it and this time it updated my phone and my phone turned back on with everything there.
    So glad I ignored the previous messages asking me to restore! You could try this if you have iTunes and don't want it restored to factory settings.

  • HT201210 Attempted to update my Iphone this morning.  Got what looks like my phone asking me to attach my phone to my itunes.  Did that and now Itunes is telling me I my phone is in recovery mode and I need to restor it.

    Attempting to update Iphone.  It gave me a picture that looks like it wants me to attatch the phone to the computer with my itunes.  Noe itunes is tellime me my phone is in recovery mode and wants me to restore my phone before it can be used with itunes.  should i do this? will I loose all my pictures/contacts/songs?

    You don't have a choice. Anything that was on the phone is already gone. hopefully, you've been backing up on a regular basis. If you had iCloud backups turned on, the backups should be automatic.

Maybe you are looking for

  • When creating a "pop up" I want below image to show...

    Hello, I have 2 objects. When I click my invisible button, I want the pop up to show, but I also want the object underneath to also show through. Currently, when my pop up shows, it deleted the object underneath. Tips to fix this?

  • Was Itunes written by a 12 year old?

    Trying to transfer a single new album onto my daughters iphone and 45 minutes later Itunes is still "backing up" or "Transferring.Purchases..." or some other task which I don't want it to do. I want it to copy one album, nothing more, nothing less. S

  • Method calls in switch and for statements

    I have 2 questions concerning method calls in switch and for statements. Consider these two chunks of code: 1)      switch (foo.getIntegerValue()){           case 1:           case 2:      }My question is, is getIntegerValue() being called for every

  • Where is the Shuffle slide order button in iPhoto 6?

    Where is the Shuffle slide order button in iPhoto 6? - I don't see one... Click Settings at the top of the Slideshow dialog to set one or more of the following options: ** where is this button? ****---> Select "Shuffle slide order" to play slides in

  • How to run labview in exe

    We have a scoreboard and we don't know how to run it in an exe.file. We need it to project on a big tv screen. please answer thx