I tried to update my iPAD & I just keep getting an error message
I connected my iPAD to my laptop to back up as i hadn't done it for about 3 weeks. I connected to iTunes & began to sync the iPAD then the iPAD screen went blank.
When I try & turn the iPAD on it just comes up with the cable sumbole & a message 'connect to iTunes.
When I connect to iTunes it tries to do a recovery/restore it tries & the timer bar fills up, then I get an error message 3014, unable to restore your iPAD.
It was working fine up until I tried to sync it :-(
I have tried;
turning off & on using the home button & power button reset
amending my security on the PC
Updating iTunes
all to no avail. I went into the iSolutions shop today who were less than helpful!
Is my iPAD completely dead or can it be salvaged??? My iPAD is 4 days over 2 years old
I hope aomeone can help me please
Thanks
Tori
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom
Similar Messages
-
I am trying to update my iPod touches and keep getting an error message saying iTunes could not back up my iPod because a session could not be started. I have followed all trouble shooting advice found on the apple website, unplugged and replugged the device, restarted my computer, etc. Any suggestions would be much appreciated. Thanks
I have the same issue, except I can't even sync.
-
Frustraing trying to update to Version OS 6 but i keep getting this message in the subject line above , i have the latest iTunes and the latest udates , except this one
iTunes places the iPhone backup in the following location. Navigate there & delete everything in the backup folder, but not the folder itself. You will have to turn on "Show All Hidden Files & Folders" to see it:
Mac:~/Library/Application Support/MobileSync/Backup/
Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\ -
I went to my iTunes on my computer to update it that way and iTunes does not show the new update.
The servers are getting slammed by millions of people wanting to upgrade.. just give it some time, and soon enough you'll have your upgrade.
-
hi i when i am trying to update my ipad to ios i receive an error message 4005 please help.
Read through this for solutions to error 4005:
http://support.apple.com/kb/TS3694 -
Just recently on my IPad I can’t update my App. I keep getting the error message “invalid Address” what is going on?
There are a number of threads about this - it looks like Apple recently updated their address validation. Some people have recorded success by :
ensuring that their iTunes account address is exactly the same as appears on their credit card bill
putting something in the second line of the address (including just copying the first line)
expanding abbreviations e.g. St to Street, Ave to Avenue etc (or conversely abbreviating)
putting apartment or suite number on the second address line -
Just recently on my IPad I can’t update my App. I keep getting the error message “invalid Address”
There are a number of threads about this - it looks like Apple recently updated their address validation. Some people have recorded success by :
ensuring that their iTunes account address is exactly the same as appears on their credit card bill
putting something in the second line of the address (including just copying the first line)
expanding abbreviations e.g. St to Street, Ave to Avenue etc (or conversely abbreviating)
putting apartment or suite number on the second address line -
I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone"
Assuming you are using the current version of iTunes (11,2,2), open iTunes, click "Preferences" under the leftmost entry on iTunes' menu, then choose "Devices".
Find the iPhone's backup there, highlight it, and choose "Delete Backup". -
I have an iPad 1 and cannot get my rental movie to download- I just keep getting download error message?
Try removing what is called the iPod Photo Cache on your computer.
http://support.apple.com/kb/ts1314 -
I'm trying to update my itunes and I keep getting the error:the feature you are trying to use is on a network resource that is unavailable.
Which particular .msi file (or files) does the message (or messages) go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)
-
I am trying to download itunes 10.6 and keep getting the error message "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes67.msi". Where do I find this or how do I get it?
"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I cannot access my mail from my ipad. I keep getting an error message "MFMessageErrorDomain error 1032"
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom
Tap Settings > Mail, Contacts, Calendar and delete your email account.
Then tap Settings > Safari > and Tap Clear History and Clear Cookies and Data.
Now tap Settings > Mail, Contacts, Calendar and re-enter your email account credentials.
Message was edited by: Texas Mac Man -
I have a 2nd generation iPod touch. I have not updated the software from version 2.2.1. When I connect to iTunes to update to 4.2, I keep getting an error message. Has anyone else had this issue and figured out a way to fix it?
Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
-1 error
-1 error too -
I am trying to add a hard disk but keep getting an error message to add null disk
I am trying to add a hard disk but keep getting an error message to add null disk. How do I fix this problem?
When installing a new OSX, it is not unusual that some applications will not work. You have to check with the developer to see if they have upgraded to the new OSX or find a substitute application.
In regards to your new HDD, most of the time they come formatted for Windows, not Mac. Connect the HDD to your MBP and open Disk Utility>Erase. To make it compatible, select 'Mac OS Extended (Journaled)' as the format. Click on the Erase button. You then should be able to read and write to it.
Ciao. -
I'm trying to use bootcamp assistant and I keep getting an error message saying I need at least 10gb available on my start up disk and I have 27gb available. Any suggestions?
That is not what it says, please post the exact and complete message, take a screenshot.
Maybe you are looking for
-
How can i read XML string in a loop???
i changed xml file reader to xml string reader by looking around this and other forums. here is the code. public class XMLTester2 { public static void main(String[] args) { String s = "<firsttag><secondtag>123</secondtag></firsttag>";
-
How to compress a video in iPhoto to QuickTime?
Hello, I'm having a rough time here and could use some assistance. I took a video with my Canon camera, and then I transferred this video to my iPhoto program. The video size is 177 MB. Now I need to upload this video to a website, but I am told that
-
Why won't you let me use export pdf?
I have a subscription to export pdf and now I can't use it. Why is that?Adobe ExportPDF (read only)
-
Effective value comparison of StringBuilder objects
Hi there, I got questions in comments of the code. Can anyone help? public class StringBuilderTest { public static void main(String[] args) { StringBuilder sb = new StringBuilder("abc"); StringBuilder sb1 = new StringBuilder(
-
Forte C compiler, SIZEOF from X11/xdm.h and macro concatenation
Hi, I'm trying to trace the version of compiler I need to build some legacy software. The software can't be changed. I'm currently using:- % cc -V cc: Sun WorkShop 6 update 2 C 5.3 2001/05/15 with a demo licence. I'm currently having problems compili