I tried to update my iphone 4, it came up with the connect to itunes siymbal and now my phone is stuck on that. i have tried to restore it and it wont work?? can anyone help me?
I have tried to update my iphone and when it come to the sync part my iphone 4 turn off and is now stuck on the connect to itunes symbol. i have tried to restore it and it keeps telling me my internet timed out which its wireless so it cant have. can anyone help??
Connect to iTunes and follow the information from this support document http://support.apple.com/kb/HT1808
Similar Messages
-
my iphone 3g is stuck on the connect to itunes mode and it wont show up on itunes. itunes hasnt even detected it on recovery mode. what do i do i really need my phone.. please help
Please stop altering the fonts, it makes reading postings extremely difficult. If help is desired, making postings difficult to read is not the way to get help.
Put the device in DFU mode (google it), then restore. -
my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored. can anybody help me with this?
it was saying error code 1, i tried the things it said but none of it worked. now it is not showing an error code at all, it just keeps saying it needs to be restored.
-
when i try to reset my ipod it stops at 10minutes and the ipod turns itself on and acts like ive done nothing to it, it has been stuck on the "connect to itunes screen" and it wont reset. why?
After you place the iPod in recovery mode using
iOS: Unable to update or restore
You have to then connect the iPod to your computer and restore via iTunes. Are you doing that? -
i carnt hear my message tone,the sound it makes when the phone locks and opens,also i am unable to hear music when playing from my phone but my ringtone and alarm tone work.Ive made sure the silent button is not on,and the volume button on the side of the phone is just showing it blank instead of it going up and down.To try and fix this i have reset my settings and restored my phone,but now its just skipping the music i have purchased from itunes when in a docking station which is now another problem i have as well.Can anyone help????
Hello dbrookes,
Thank you for using Apple Support Communities!
It sounds like even though the Mute switch is not on, sounds are not making the, well, sound they should, and the volume buttons make a blank volume indicator appear on the screen that does not show the volume level.
I wanted to recommend a couple of things.
First, I would reset the phone:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve the issue, then you may want to try backing up to iTunes, and restoring the iPhone again but this time do not restore the backup and set it up as new to see if the issue persists without the previous configuration.
Just incase you need it, this article will help with that:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Cheers,
Sterling -
Can you help me here please.I've installed itunes ,my computer's OS is windows 7, but I cannot connect to itunes stores and an error 0x80090318 pops up. Dont know what to do! i did unistalling many times and reinstalling again but the same thing happens.
try this:
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
HT1925: Removing and Reinstalling iTunes for Windows XP
http://support.apple.com/kb/HT1925
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
good luck -
My ipod is frozen on the connect to itunes screen and computer wont recognize it
my ipod is frozen on the connect to ipod screen
i know its been awhile since this thread was active.. but anyway ... after thinking about it some more... and still having issues .. (sorry the update was frozen /i tunes not recognise etcetcetc during 5.1 update) .. I went to the troubleshooter again... did the reset thing.. checked that windows 7 actually recognised the ipod was there... then I READ THE INSTRUCTIONS OF THE TROUBLESHOOTER PROPERLY and decided to actually follow its advice fully... and UNPLUGGED any OTHER USB devices regardless of me knowing "it couldnt possibly be that!!" .. plugged in the ipod only... result.. within 10 seconds the restore screen was available and i could get the process started.... its just like waaaaaaaaaaay back in "the good old days" when RTFM and device conflicts were rife...
unplug the extra USB devices people... nothing will blow up without them for a few mins!! -
I have a new iphone 5 and although I had a little trouble downloading all my apps and music, I did this successfully but now when I connect to my itunes, itunes doesn't see it and also bluetooth doesn't seem to be working.Can Anyone help?
Hey leafxxx,
Thanks for the question, and welcome to Apple Support Communities.
The following resource provides troubleshooting steps if your iPhone is not displayed in iTunes when connected:
Apple - Support - iPhone - iTunes Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/itunes/
For more detailed instructions, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Enjoy your new iPhone 5!
Matt M. -
I was trying to update operating system of my iphone but it gives the following error(We're sorry, we are unable to continue with your activation at this time) Now my phone is not work working can anyone help?
Is your iphone hacked/jailbroken?
-
I am over trying to update my iphone! Everytime I do it will not restore and I have to wipe everything and start again. Can anyone help me, I am on a PC
What makes you think I can't use my phone in another country or with another sim. You obviously can't, but we are hardly going to talk about hacking an Apple phone on the Apple site. By the way mine is officially unlocked so can swap sims within seconds.
-
I just loaded Lion oxs 10.71 on my I-mac computer, and now my Logic 9 software wont show up it says its not compatible also i cant find my macintosh harddrive icon that is usually shown on dektop and device browser column can anyone help me with this problem.
Mike,
I had a similar issue with Photoshop when I upgraded to both Snow Leopard and Lion. it turned out to be Rosetta is no longer present in the newer OS. Once I upgraded to Lion, Appleworks stopped working after all these years. -
Hi Everyone,
I just deleted PS CS6 and installed PS CC 2014. I'm trying to use the Liquify Filter and it does not work. When I click on the Liquify Filter, my photo does not appear properly. The photo appears as two flourescent color fields - bright turquoise and lime green! Can anyone help me with this? Also, does anyone know if I can re-install Photoshop CS6?
Thanks!
LaraineHi Everyone....I figured it out. Strangely, although I had NEVER used Liquify in PS CC 2014....I just realized that in Liquify Advanced Mode that the "SHOW MASK" option was on by default! I unchecked SHOW MASK. Everything is OK. Whew! Tks!
-
I have an iphone 4S and i cant download apps onto it. Everytime I click to install, the icon appears on the homescreen with 'waiting' under it and then disappears. Can anyone help? Its driving me mental!
I found this very good
http://ipadhelp.com/ipad-help/iphone-ipad-apps-stuck-waiting/ -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
I've burnt a digital copy of 3 blu ray dvds onto my iTunes, but i cant sync them to my iPad-an error message says device needs to be authorized, but its only authorised to this computer, i've never tried to use it on any other! Can anyone help?!
Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it
Maybe you are looking for
-
How to get rid of the safari community toolbar?
How to get rid of the community toolbar in safari
-
How do I relink generator files in FCP X?
I recently moved my FCPX projects from one hard drive to another via a different computer. In doing so, I chose to Duplicate and copy referenced events. However, the titles I created are all no longer available. I have manually copied over the Motion
-
Please Help Updating FCPX 10.0.8 files to 10.1.1 - Manually Doesn't Work
Hello all, I tried updating all my Events and Projects from FCP 10.1.1 after using it for awhile (explanation below) and it won't recognize them. After studying online, I've put my Final Cut Events and FC Projects folders in my boot internal Movies d
-
Hi all, Any pointers regarding function modul used for finding out includes and attributes of includes for a given program is highly appreciated. Regards, Rajashree
-
Why is this thing crashing even with Firefox help the only window open? Just updated Mac OS 10.6.7.
''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/812003]'' No time for details before this of crap crashes again. Where is location bar? Screen shot isn't for a mac. I've lost this about 10 times in 20 minutes.