I tried to update my iPhone 4s to the ios 6 and it wouldn't download and my phone will not work now.
I tried to update my iPhone 4s to the ios 6 and it wouldn't download and my phone will not work. I started the download and it said that it had 6 hours remaining, so i just left it overnight. The next morning it was working fine, but the ios 6 didn't download. I looked at it later and it had the turning on screen with the loading bar under it. It stayed like that for a while and the bar didn't move. I needed to use my phone so I tried to make it go to the home screen, but nothing happened. I held down the lock and home button for a few seconds and everything went black. I tried to turn it back on and all it has done all day is stayed on the turning on screen. I tried plugging it into the wall, and nothing happened. I tried connecting it to iTunes, and nothing happened. I don't know what I need to do to get it to work.
OMG is working OMG OMG OMG Thanks alot dude!
Similar Messages
-
Hi I'm trying to update my iPhone 5 to the iOS 7 but all when it is activating it doesn't work
Hi I'm trying to update my phone but it won't activate I need help
I am having the same problem! Help!
-
i tried to update my iphone 4 with the ios 7. now it want do anything except it has a picture of itune and a power cord. what can I do now to get my phone to work
The picture is suggesting you plug your iPhone into iTunes on your computer using the USB cord.
-
I am trying to update my iphone 3Gs for the IOS 5
Please help!
I am trying to update my
IPhone 3GS to the new update ios5 and it has downloaded and its now stuck on the Backing up Iphone bit and its been there since 3:00pm today and still wont go away, I have stopped it once due to thinking the computer had frozen and restarted it and its gone and done the same and now i am going to leave it to go though the night to see if it will be done in the morning, Please please you know how to make this ****ing thing work TELL ME ! lolare you able to see the apps on the home screen? If so, it's most likely an issue with your carrier
This is also an issue that can appear on devices that have been modified in an unauthorized manner (not judging, just saying) -
It keeps saying my iphone is in recovery mode and I cant restore it. It just tells me there's an error and cant be done. I just want to be able to turn my iphone back with the data or without it
Sorry. You're not making much sense. What is the exact error you're getting?
-
I tried to update my iphone 4 to the ios 7 and now its on recovery mode. How can i take it off of recovery mode?
Hi _em24,
It sounds like you are having an issue with the upgrade to your iPhone’s version of iOS, a frustrating situation to be sure. Let’s see if we can get you back up and running.
For basic troubleshooting of upgrades, and assuming you are using iTunes to do it, I would suggest using the steps in this article -
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If not using iTunes or the above do not produce the desired result, use the steps in this article -
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694
Thanks for using Apple Support Communities.
Best,
Brett L -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?
You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.
-
I just tried to update my iphone 4 to the 5.01. It said that my phone backed up and started update. i went on a run and came back and my phone is now stuck in recovery mode. It keeps saying that there is an unknown error, 1. I have tried everything on the troubleshooting list and cannot figure out what is wrong! Please HELP!!!
http://support.apple.com/kb/TS3694#error1
-
In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement. Any suggestions?
In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement. Any suggestions?
-
I'm trying to update my Iphone Software to the the new IOS 7 but it says there as an uknown error (6). Can someone please help me? Thanks
http://support.apple.com/kb/TS3694
Check the section on
Errors related to third-party security software -
I'm trying to update my iPhone 4 to the new iOS6
I'm trying to update my iPhone 4 to the new iOS6, but it keeps telling me to restore to the factory settings. Should I do this or will I lose everything? Also, I turned my phone on and off and I cannot use it until I restore. HELP PLEASE!
If you have a back up of your phone, then theres no worries you can restore to it.
if you don't have a backup, then you'll lose everything. You'll have to restore to update. -
Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off. Please help.
Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.
-
I am trying to update my iPhone but it seems that I have to many photos and music because I received the following message: The iPhone could not be updated; this device is not elegible for the requested build. Does anyone know how to fix this?
You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.
-
I am trying to update my iPhone 4 with the jailbreak in it. And why I updated it, it was fine at first. Then it started to turn off and turn on over and over again. What do I do? Is this normal?
When jailbroken, you cannot update the iOS on your device. The only way to fix it is to do a full restore through iTunes. Before you do this make sure you backup your device and everything on it.
Maybe you are looking for
-
Issue to drill down from a report
Hi, Our requirement is we need to show three different graphs in a single report representing different data, from that we need to drill down to a new different report ; Two approaches we tried with crystal report are; 1. We put three graphs and
-
How to change associated iMessage email in conversation?
Hi all, A friend and I are having issues with iMessage. Basicly her whole family uses the one Apple ID for purchases, so my friend updated to iOS5, and we were messing about with iMessages not realising that it was using their family Apple ID. So we
-
How does one customize the LabView 6.1 installation
Noticed that LabView 6.1 is an MSI-based installation. But setup.exe has very few optional switches: /? or /h - displays help /q - silent install, requiring the user to register the first time it's run /l - log file, same syntax as MSI SpecFile - no
-
Account Balance - LineMemo Field on JDT1
Hello SDN Community, On the Account Balance for each BP the details field brings de invoice and sales order document numbers. How does this field LineMemo on Table JDT1 is written by the system? When an invoice was made directly without a sales order
-
Capturing value attribute from command_link
Hi I have a command_link with no id attribute but a value attribute set ... as below: <h:command_link value="xxxx" actionListener="yyy"... /> When the link is selected the yyy method is being called but how do I get the xxxx (of value attribute)...?