I tried to update my iphone4 to enable iO5 and now my phone just shows itunes plugin picture??
I tried to update my iphone4 to enable iO5 and now my phone just shows itunes plugin picture??
Connect it to the charger and let it charge for a while. Then try again. Never upgrade your phone without first connecting the charger. Don't let the battery go dead or the entire device could become disabled.
Similar Messages
-
while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on
Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore -
I bought a iPhone and I was able to log into my iCloud with no problem and when I tried to update it it kicked me out and now it's asking me for the old apple user please help what can I do...?
Contact the original owner, and ask them to remove the device from their icloud.
http://support.apple.com/kb/PH13695
HTH -
I just updated my iphone4 to iOS5.1 and now I cant use my 3g, everything on my cellular data's right but I cant activate my 3g anymore, can you help me please? thank you! i really need it
Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data doing a reset.
If this does not work, set it up again as new device, without using the latest backup afterwards.
How to back up your data and set up as a new device -
I tried to update the software on my ipad and now my screen is stuck on the plug and the itunes logo
I tried to update the software on my ipad and now my screen is stuck on the plug and the itunes logo
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I need help, I pluged my iphone to itunes and got a message that said there was an update to download and update, I did but when itunes was rebooting and updating I got an error message. and now the phone is telling me that it cant be activated, to plug it in to itunes or to contact support care.
That message usually indicates that your phone was hacked to unlock it from the original phone carrier, then when you updated or restored it locked back to that carrier.
-
I have a n IPhone 4S. I upgraded to IOS7 and then tried tp go back to my prevous IOS and now my phone will not turn on at all.
I tried to do the same, but couldn't find ios 6. I even tried the APPstore, to download the last IOS6 version.
The most problem is the running out of the battery.
I've checked each app who is "eating" the most power.
The battery stoped runaway, when I closed the weather service....
So for now, I will use regular internet service, and probbaly will do to more app.
Until, finaly, I will find my self with all the applications closed....:-)
That will be the sign, to replace my phone to anderoid....:-)
Till now, there is no any sign from Apple to have a glance to our complanes. -
Just updated my 4s to iSo 6 and now the phone does to pair with my Lexus anyone have/solve this issue? Is it a firmware problem with the car?
Was it pairing before the iOS update?
If so, delete the pairings in the device and the car, then try again.
If it was not, the issue is most likely the car. -
updated iphone 4 to iso 7 and now my phone tells me to plug into itunes
http://support.apple.com/kb/ht1808
-
I was trying to update my iphone 4s and it came up an error. Now my phone only shows a charger and the itunes app.
You might need to do a few times
http://support.apple.com/kb/HT1808 -
I was doing the update of ios8 on my 4S and now my phone is not working
I Was updating for IOS8 on my iPhone 4S and now my phone is stock in connect to iTunes I connected but is not doing anything. I try to rebooted but nothing is working. What should I do?
I have the same problem. Updated an iPhone 4s to IOS8 but got an unknown error which advised me to enter Recovery mode. That worked OK and the phone is now recognized by iTunes. I restored the iPhone but it will not download my 3rd party apps. Gets stuck in sync after downloading one app. Nothing happens after that. Sync cannot be cancelled except by disconnecting the iPhone. Reconnecting the phone downloads one more app, etc.
Also my music library is missing on the iPhone. Playlists are there but there is an iCloud download icon next to every song. I did not turn on "iCloud Drive". ITunes is not downloading my music during sync, just the titles and artists and playlists.
Ideas? -
I was updating my phone and now it is frozen
Due the unsuccessful updation your iPhone has stuck in recovery mode. you need to download the iOS 7.0.2 from the following link http://appldnld.apple.com/iOS7/091-9872.20130924.2wc82/iPhone4,1_7.0.2_11A501_Re store.ipsw and restore your device manually,please make sure you have all the backup stored since this will be a restore not an update so you data will be lost and you will have to restore your data from backup.You can do this by shift + mouse click the restore button in iTunes this will give you an opendialogue box to select the iPSW from which you want to update your iPhone after that have some patience and let the iTunes complete the installation and enjoy iOS 7.0.2.
-
I've just tried to update the software on my 5s and now it won't switch on
My phone kept asking me to do an update, I have the 5s, so I finally updated my software and now it won't switch on, it won't do anything. I've plugged it in to my iTunes and it does nothing. Please help!
Make sure it is charged and try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore -
I just updated my software, and now my apps won't work. They just open the close quickly....I've done a force quit, but it stills doesn't work! What can I do?
Have you tried a reset?
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Maybe you are looking for
-
Hello Friends We are using 7 types of Purchase Orders and net price is updating for all type of purchase orders except one which is the PO type is FP (Using exclusively for foreign material procurement). I have observed in table u201CEIPAu201D - Orde
-
I have just installed CS5.5 and with it came Acrobat 10! What a nightmare! I need to enable commenting on pdfs I send out for proof reading. It was simple in the previous version I was using but, although I have been searching for hours for how to do
-
HT6147 is there going to be a Security patch for 1st Generation iPads?
Is theis there going to be a Security patch for 1st Generation iPads? one has been released for all of the other devices.
-
Hello - I am creating books which use images that are on a networked computer. Periodically, that computer is turned off, and then on again. Some of the documents in my books have the little yellow alert icon at the extreme right of the panel. I assu
-
Autostarting a daemon from a 32 bit chroot
hello i have arch64 and a brother dcp 135c printer. brother does supply drivers for linux but unfortunatelly for 32 bits only. because i have a 32 bit chroot, i thought i would just remove cups, and then inside the chroot install cups again, install