I tried updating my ipod touch to iOS6 then an unknown error occured so i disconnected it an now it is stuck on the apple sign and has a loading sign and has been like this for 2 hours. what can i do?
I tried updating my ipod touch to iOS6 then an unknown error occured so i disconnected it an now it is stuck on the apple sign and has a loading sign and has been like this for 2 hours. what can i do?
My home button is also unresponsive and i have to press it really hard to make it work.
Do you remember the the exact wording of the error message:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Similar Messages
-
After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster? It's has been like this for 4 hrs.
I don't think your mac is setting up. It's stuck.
I would:
hold the power button until it shuts down
unplug all peripherals
do a safe boot (restart and hold down the shift key until you see the apple logo).
If it starts up in a safe boot, then you can try restarting with a normal boot.
If it does not start with a normal boot, then you probably have some incompatible third party software. Likely culprits are:
MacKeeper
CleanMyMac
third-party antivirus software
any other "cleaning" or "optimizing" or similar third party "utilities".
A good place to start would be to uninstall any of those (while in safe mode) and then restart. -
I spilled diluted orange juice on my laptop, afterwards I switched it off to let it dry, switched it back on and it worked for about 10 mins then switched off and won't switch on again. The battery indicator on the side is constantly on. Please any advice would be extremely appreciated.
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
https://www.techrestore.com/mac/
http://www.dttservice.com
http://www.myservice.com/macbookpro.html
http://www.ifixit.com/Device/MacBook_Pro
http://www.PowerbookMedic.com -
Somone please give me some feedback!
Sure, they'll replace it the minute you hand over $149 for an out of warranty replacement.
-
IPHOTO CRASHED AND HAS BECOME UNRESPONSIVE IT HAS BEEN LIKE THIS FOR 3 DAYS I HAV FORCED QUIT AND REBOOTED WHAT CAN I DO????
Try reading these:
Joining and troubleshooting Wi-Fi networks
Troubleshooting Wi-Fi networks and connections -
my phone just has searching... up in the top left hand corner and it has been like this for 4 hours now! i am unable to make calls or texts. what should i do? It is an iphone 5 by the way
Take a look at this link, http://support.apple.com/kb/TS4148
-
The update for Pages says it is installing however it has been like this for days. Cannot open the app. What can I do?
Double tap the Home button to bring up the multi-tasking bar...tap & hold any app until they all start to wiggle...tap the red minus sign to remove every app shown. Tap the Home button when finished. Try to delete the app now.
-
I go to sync my Iphone 4 (IOS 5) with iTunes on my mac and is is stuck on step 8 "waiting to copy items" it has been like this for over an hour. What can i do to fix this problem????
If you are stuck at the blue screen then you can try booting into safe mode (hold shift during boot) and then run disk repair. If that still doesn't fix it then you might have to reinstall OS X. What version of OS X are you running?
-
The iPad says disabled connect to iTunes. When connected to iTunes it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
When trying to restore and update my ipod touch it comes up with an error message saying: "The ipod can not be restored this device isnt eligible for the requested build" How do i fix this?
I am having the same issue. I just had the battery replaced at a third party store. The battery powers the ipod up but it needs to be restored. It is saying it isn't eligible for rebuild. I am running MAC OS 10.4.11 itunes v. 9.0 and I just want it to be restored. I need help. Oh and its an 8 gb ipod touch.
-
My iPhone 4 froze when I was using the Facebook app. The only thing moving is the indicator at the top spinning to show its "thinking." Its been like this for about an hour, I can't even turn it off. Any ideas (other than letting the battery go dead)?
Thank you, I've tried that but it won't work either, the logo never comes up. It just stays on the FB app screen. I tried connecting to iTunes to see if I can fix something from there and it freezes iTunes. Also tried disconnecting the wifi (I don't know how I thought that would help but worth a try) and plugging it into the charger but still nothing. I think I'll have to visit the store tomorrow. I appreciate it, though!
-
my ipod has a black screen with a loading symbol (its moving) i cant turn it off or plug it into itunes its been like this for about 3.5 hours. i tried to do a system reset it after a glitched download. but while it was reseting it got stuck ot a black loading screen.
PLEASE HELP ME !!!!!!!!The article helped me a bit but it doesnt help me totally because the buttons dont work and i cannot connect to itunes (itunes does not sense my ipod when plugged in) so im thinking to just let the battery uncharge...
but when it went down i was fully charged
(im very unpatient) -
I restored my Iphone 3G using the settings on my phone to remove photos and contacts, however since then my phone remians sitting on the apple sign on start up and has been like this for days, have tried plugging it into my itunes but not recognised can anyone help
See this:
iPhone and iPod touch: Unable to restore -
Can't open up Itunes (its been like this for months, and no response.)
I can not access itunes. Whenever I click on it it says:
"iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost."
It has been like this for a while. One day itunes just stopped working. Help from Apple would be nice.
E machine Windows XP
E machine Windows XPwe're still on track.
Error Number: 0x80040707
Description: DLL function call crash: QtinstallCode.QuicktimePostinstallProc
that's a known complication of a broken QuickTime. in this context, it usually means the installation configuration information of the QuickTime has been compromised.
here's what we'll try first.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
next use the QuickTime component of the complete uninstall instructions in the following document as a guide to a manual removal of leftover QuickTime program files and folders.
Trouble installing iPod, iTunes, or QuickTime software in Windows
once we've got all the existing QuickTime scraped away, let's try another careful standalone QT 7.0.4 reinstall.
does it go through properly this time? if so, does your itunes launch properly again?
love, b -
my ipod wont turn on. the white apple with the bite appears, stays for about 10 to 15 seconds like it normally does for booting up, then fades away and the screen goes black. 5 seconds later it repeats. it has been doing this for hours now. I tried the home and power button thing and the screen went black. then i hit the power button and it continued to do the same thing. i tried plugging it in to my wall, my charger recognised that it was charging. i tried plugging it into my computer and it made a sound like something was plugged in. but nothing came up.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Backing up all my photos on external hard drive
Hi! I have iPhoto 4.0.3 (no need to upgrade, nor have I had the time to do it yet), and I have 6,347 photos. It says that I'm using 3,506 MB. My computer isn't running slowly, but I haven't bought extra RAM and I'm sure iPhoto isn't helping the speed
-
Importing LCA applications issues
Hello everybody. In the last few days I've been working with the LCES2 Linux virtual appliance made available by Adobe and I tried to import a fairly complex application developed with LCES 8.2.1. I stumbled across a few issues I'd like to share with
-
How to I delete .Mac web galleries on the web? I deleted them in iPhoto, but they are still showing up on the web page.
-
Exclude users who's names contain
Trying to automate my O365 licensing and have had some sucess but am not sure how i can accomplish the following... I have users who i do not wish to license and they all share the value "svc" in their DisplayName. In trying to test how this would wo
-
Getting B2B-51512 while processing 997
I verified 997 file and I don't see anywhere it is having 4010 in the EDI, but when I trying to process it, it is getting following error.. Will anyone pls advise any issue here..thanks! Error Code B2B-51512 Error Description Machine Info: Validation