I try signing into iMessage and it takes about 45-50 seconds to do. When that happens it tells me there is a network problem. I am positive I don't have a network problem and I need help on this problem please??
I try to sign in and it just takes forever to do I try and try and do it over and over and it brings me the same results. Created a new Apple ID and when I did it still tells me there is a network problem. But the thing is I am still able to use the Internet I need help?? And it does the exact same thing for FaceTime so I don't know what to do??
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799
Similar Messages
-
My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.
They error message I get is "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."
This only started after I upgraded my OS to Yosemite.The upgrade has been know to break Photoshop CS5 installs. An Uninstall/Reinstall may be necessary.
-
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
Try signing into iMessage and FT and I get "an error occurred during activation, try again"
I get text messages from non iphone users but when someone with an iphone send s me a message, I don't get it. So I checked my settings under imessage and it says I'm not logged in. When I try to login, it says, "An error occurred during activation, try again." Nothing is wrong with my internet connection and I can download apps just fine. I went to Settings>Store and logged out of my account and logged back in and still have that problem. Any suggestions?
I get text messages from non iphone users but when someone with an iphone send s me a message, I don't get it. So I checked my settings under imessage and it says I'm not logged in. When I try to login, it says, "An error occurred during activation, try again." Nothing is wrong with my internet connection and I can download apps just fine. I went to Settings>Store and logged out of my account and logged back in and still have that problem. Any suggestions?
-
i had to have my computer fixed and had to reinstall my iturnes and now it won't let me burn or put any of my music that i had imported. the only thing i have found is to delete them and reimport does anyone have any ideas how to fix this without delete my whole library i have over 10000 songs and this will take me days.
thanks
sammijaneWhy will it not let you add them? What specifically are you trying to do, please provide steps.
Frankly, the only thing that should need to be done it restore the iTunes folder from the backup onto the computer. There is no reason to add or import anything. -
Hey guys i really need help with this problem...
Hey guys how is everyone? I have a Soundblaster X-Fi XtremeMusic. and i am having a real annoying problem, here is how it all started. I took the time and dusted out my computer by using a can of air duster, and i think a little got on there and it turned into frost. Weird thing is it happened before and i never had this problem. I turn my computer on and crank the volume up i receive no sound what so ever. I know it has to work because i have a pair of DJ headset hooked into the jack, and i heard a little pop sound. And no audio, every last port on the card i cannot get no sound out of it except one of them, it's really annoying i hate this doing this and i have to hook my 5.1 using one jack just to get sound. And it doesnt sound good i have some really powerful 1,000 watt speakers with 2 amps. I know this is yet due to the fact i only have the lime jack in This is the only way it'll work. And i have a THX cable and it works sometime. I hope my soundcard isnt messed up. I really hope you guys can help me with this issue. I cannot contact creative cust service via email because i dont have my box no more, and my serial number is faded on the card (i think that was the serial)
I try to explain the best way i can describe it. Below is my System Specs.
<pre>Processor: AMD Athlon X3 425 @ 2.7GHz
Video Card: ATI HD 5770 1GB
Hard Drive:1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Antec 550 Watts True Power II
Sound Card: Creative Soundblaster XI-FI Xtreme Music
Motherboard: ASUS M4A79XTD EVO
DVD Drives x2. Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections</pre> Thanks in advance hope you all have a splended weekend.Hello
Thank you for your help but unfortunately still have troubles with the soundcard.
I upgraded my system to
RAM: Corsair Vengeance LP 16GB DDR3
Processor: AMD Phenom II X6 1090T Processor, Black Edition 3.3GHz
Video Card: Sapphire 100314-3L Radeon HD 6870 1GB
Hard Drive: 1TB Western Digital, 500GB Western Digital, 300GB Seagate (all SATA connections)
Heatsink: Zalman CNPS7000C-Cu
Power Supply: Corsair TX850W 850 Watt SLI/Crossfire Certified
Sound Card: Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional (getting this soon)
Motherboard: ASUS M4A79XTD EVO (BIOS: 2102)
DVD Drive(s): Plextor DVD-RW/DL/ Sony DVD-ROM Drive via PATA connections
And i still run into problems i think its a matter of a hardware issue. The plugs dont really work
only one does (where lime goes in) And the bass has toned down as well... Isn't as powerful
as it used to be, so my best be is to upgrade to Creative Labs Soundblaster X-FI Titanium Fatal1ty Professional
Thats my only hope...
But again thank you for your help -
I have just updated my ipod and it is saying i need to connect it to my Apple iPod Power Adapter, the problem is that i do not have one.
Is there anyway to reset the update process untill i get a adapter.
I have tried resetting it with the instructions given on this site, but it is just showing a picture of the Apple iPod Power Adapter plug.When updating or restoring some iPods via a usb connection, it needs to be plugged into power via the charger to complete the process, and this is why you see that icon displayed. It's also why older iPods that required this step were supplied with a power adaptor as standard.
You may be able to complete the process via a car charger, or via a powered firewire port on the computer (with the required 6 pin cable of course) if you have access to either of those. Or maybe visit an Apple store if one is nearby.
Or you can try this.
http://www.bearsdriving.com/blog/archives/2005/10/youripod_tipo.html
Other than that, your iPod cannot be used until you complete this process. -
I need help unlocking an ipod that has the previous owners apple id and it wont let me log on and the previous owner, no longer is able to be reached.
You will need to contact the previous owner, only they can reomve it from their account : http://support.apple.com/kb/TS4515
If you can't contact them and get them to remove it then you won't be able to use the phone. -
Possibly corrupt prefs.js file. Need help with this file please.
I've been having a problem with sending/receiving text messages in Yahoo Messenger and I think I've narrowed it to the prefs.js file in Firefox. I'm using Firefox 3.6.25 on Windows XP sp3. The Yahoo Messenger window would not open when the appropriate mobile phone link was clicked. I uninstalled/reinstalled flash without change. I cleared cache, etc., without change. I created a new Firefox profile and I was able to get the Yahoo Messenger window to open. When I copied the prefs.js file from the old profile to the new profile, I encountered the problem again. I opened the prefs.js file with wordpad and noticed that editing should occur in about:config in the currently running Firefox browser. I briefly compared the two about:config tabs from the working profile and the non-working profile. They were significantly different. How do I make a copy of one so that I can paste it into wordpad and make the editing of the other one easier? Where can I find information about the individual parameters and their settings?
Hi,
Please see [[http://kb.mozillazine.org/About:config_entries this.]
[http://kb.mozillazine.org/About:config about:config]
You can try to '''Reset all user preferences to Firefox defaults:''' and '''Make Changes and Restart''' in the [https://support.mozilla.org/en-US/kb/Safe%20Mode Firefox Safe Mode] start screen which would also hopefully solve the issue. You can also try to manually '''Reset''' to defaults the modified entries by right-clicking on the bold entries (user set) in about:config. Clicking on the '''Status''' column header would sort the entries between user set (modified) and the defaults.
An easy way would be to create a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile] and [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy/transfer the needed personal data] from the old profile and start using the new profile. You can then delete or troubleshoot the old proile. Firefox stores your personal data and settings in [http://kb.mozillazine.org/Profile_folder another location (profile folder)] separate from its [http://kb.mozillazine.org/Installation_directory folders/files]. A new profile would have the default Firefox settings in '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window Options] and [http://kb.mozillazine.org/About:config about:config], and usually would also be empty of '''Extensions''' and themes ('''Appearance''') in '''Tools''' > '''Add-ons''', and their settings. Also, a new profile would have no previous stored website cache/cookies/data/preferences: '''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History'''].
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files] -
I have a valid apple I'd which I use to sign in to the apple community without any problem, but each time I try to sign in to iMessage, it shows me that Username and Password is incorrect please try again. Why is it so?
I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.
-
I made my administrator account a parental control account, at the time of creating it, the system asked for my administrator password, to restart the computer, and the new account was created. When I accessed that account at the parental control menu I could see my main account on the list and i deleted the account from that list, and now i'm trying to get back to it but I'm not able to because every time i restart the computer brings me back to the account I created. I searched for help on the web and it says to go to users and select the account I want to restore but I can't do it. Please help.
User account – restore missing admin
-
I need help solving this problem!!
Hi, i'm new to java and have written only a few programs, i recently wrote one and had the following error but dont know why...........
Exception in thread "main" java.lang.NoClassDefFoundError: quadraticsolverApp
I have included my code below.....
import java.applet.Applet;
public class quadraticsolver extends Applet
public double a, b, c ;
public void init()
a=0;
b=0;
c=0;
public String getRoot1()
if (getDescriminent() < 0.0 || this.a == 0.0)
return "" + ((-b + Math.sqrt(-getDescriminent()))/(2 * a)) + " i";
else
return "" + ((-b + Math.sqrt(getDescriminent()))/(2 * a));
public String getRoot2()
if (getDescriminent() < 0.0 || a == 0.0)
return "" + ((-b - Math.sqrt(-getDescriminent()))/(2 * a)) + " i";
else
return "" + ((-b - Math.sqrt(getDescriminent()))/(2 * a));
public double getDescriminent()
return (b*b - 4 * a * c);
public void setA(double bValue)
a = bValue;
public void setB(double bValue)
b = bValue;
public void setC(double bValue)
c = bValue;
Thanks for the help
Noel
email: [email protected]Besides that, the code is broken. For instance
return "" + ((-b - Math.sqrt(-getDescriminent()))/(2 * a)) + " i";should be
return "" + (-b/(2*a)) + " " + (-Math.sqrt(-getDescriminent())/(2 * a)) + " i";
to get correct answers... 1/2 * (-1-sqrt(3)) i (or approximately -1.36602540 i) is not a solution of x^2 + x + 1 = 0. Also, if a is small, it's better to use the formula x = 2*c / (-b +/- sqrt(b^2 - 4ac)) -
I'm a newbie so I hope I can explain my problem satisfactory. My problem at hand is that I have, lets say a (JFrame) main class that does most of the work, within this class I instantiated another class that extends JFrame and pass it a Vector. Within in this new JFrame the user can choose among multiple checkboxes which will be used to sort the Vector. Also, there are two buttons, one to close out without doing anything and the another to sort the array with the users choices. My problem is, how do I pass the sorted vector back to another method within the main class to be used? Thank you for your help in advance
Typically when you create an application it will contain a single JFrame. This is your main window and usually contains a menu, toolbar, etc. When you need additional information you would typically show a dialog. For example in Internet Explorer when you click on Tools / Internet Options you get a dialog which allows you to customize some options
Also, when the user presses the Sort button how will that call the one method
in the main JFrame I need to process the sorted vectorWhen you click the sort button you will have code that creates and displays the JDialog. Make this dialog "modal" so that execution in the main frame will be blocked until the dialog is closed. Then when the dialog closes code will continue executing after your dialog.setVisible(true), line of code in your action performed method.
The memory for the Vector is allocated in your JFrame when you create the Vector. Your main frame passes the Vector as a parameter to the JDialog. When the Vector is sorted your main frame stills has a reference to the Vector -
Need help filling this object please!!!
I need to fill shape 1 with a solid color. Shape 2 is what the object looks like when selected. Shape 3 is what happens when I try to fill it with color. I need it to stay within the boundaries shown on shape 1. Please help, I'm relatively new to Illustrator and cannot seem to find out what it is that is happening. I'm working in Illustrator CC.
jbizzle,
However I needed to redraw the object, and instead of lines I had to use rounded rectangles to create it.
Can you reuse the outer shape that looks like part of an ellipse?
If you can, you can start by recreating the top one as follows (Smart Guides are your friends):
1) Select and copy the upper/outer elliptic shape to the front (Ctrl+C+F), then lock the original full shape;
2) With the Line Segment Tool ClickDrag between the end Anchor Points of 1) (Smart Guides say anchor when you are there), then drag over the H value in the Transform palette and Ctrl+C to copy it;
3) Click with the Ellipse Tool on the Artboard and insert the value divided by 2 for W and H, then cut it at the top and bottom Anchor Point, then delete the right half;
4) Move the half circle on top of the lower left half circle shape as closely as possible, then select both the half circle and the outer ellipse, click the outer ellipse again and in the Align palette click Vertical Align Bottom;
4) Create a copy of the half circle and move it up by its height, then ShiftDrag it to fit the upper right half circle shape as closely as possible;
Now you should have the curved parts in place, and you only need the straight parts;
5) With the Direct Selection Tool Click each pair of Anchor Points to be connected by straight segments and Ctrl+J to join them;
Now you should have one clean path to fill. After that, you can rotate and move a copy. -
I really need help on this one, please!
So I'm trying to download terraria for mac, but my computer keeps telling me this can not be opened because it comes from an unidentified developer. Please help me!
Johask wrote:
But, there's no allow applications downloaded from: "Anywhere" button there.
Should be......
Having said that you can still right click and then press and hold 'Option' whilst clicking Open and gives a pass for that time.
Maybe you are looking for
-
I have an iPhone 3G and I'm trying to update to 4.1 using iTunes 10.0.1.22. When I start the update it says, "Backing up iPhone", but it stays "locked" there. I've even let it go 8 hours overnight, but it stays stuck on a single progress bar - appare
-
Final Cut 5.0 wont open after hard drive confusion
i think someone in my studio unplug a external hard drive because when i checked the timeline many files were offline i closed out of the program and re-opened and it said all my mac hd hard drive was offline i tried to reconnect it and once i did it
-
Wrong Cumulative Balance in SBO 2007
Dear Experts, I open up BP Account Balance, and notice the Cumulative Balance was accumulated with the C/D column (which is the document total for that transaction), instead of accumulating it from the Balance Due column which shows unreconciled bala
-
Can you import into iTunes from a DVD-A disc? Thanks.
-
Very first step in configuring RMAN for a Backup
DB version:10gR2 I am a DBA supporting applications development and i am not familiar with RMAN. This weekend we are going to Patch 10.2.0.1.0 to 10.2.0.3.0. Before that i am going to take a backup of the entire Database containing around 57 schemas(