I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!
I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!
See #C12 in Time Machine - Troubleshooting
Similar Messages
-
When I back up my macbook pro to time capsule 3TB, this appears:
"Time Machine couldn’t complete the backup to “Time Capsule”.The backup disk image “/Volumes/Data-1/Macintosh.sparsebundle” is already in use."
and I'm not able to back up. What do I do?As noted in the link I posted, that's fine if you're the only user logged-on to the only Mac using the TC's disks (internal and/or USB externals). If not, that may corrupt other data being written, especially other backups.
-
The Green Light is on, on my time capsule and airport but it will not back up all i get is the following message below please help.
The backup disk image “/Volumes/Data/iMac-D49A20D0AE94.sparsebundle” is already in use.Welcome to Apple Support Communities
First, restart your iMac and your Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, read > http://pondini.org/TM/C12.html -
I am getting the following error message from Time Machine (backing up to my 3 TB Time Capsule):
The backup disk image “/Volumes/Data/Freedom Book.sparsebundle” is already in use.
I have no idea why this would be in use, because only one MBP has the name "Freedom Book". Any advice on how to resolve? Running Mountaiin Lion 10.8.1.I had the same error. I unplugged my TimeCapsule for 5 min from power. Plugged it back in to power then waited 10 min for everything to comunicate again. Clicked on backup now and it worked. Must have froze up or something.
-
I constantly get the following error message: The backup disk image "/volumes/data/jameskehoe.sparsebundle" is already in use. This Time Machine/Time Capsul worked perfectly before I left on a four month trip. Upon returning to my domicle it will not backup and I get the mentioned error message. My wife's Mac Book Pro continues to backup normally but she did not accompany me on this trip so her computer has always remained in contact with the Time Machine. My computer is a MacBook running 10.7.5
Any help solving this problem and letting me once again backup my computer would be greatly appreciated.This question is asked several times every day.. it is a bug.
Look at the more like this column to the right..
Solution is pretty simple..
With the TC hard disk not running.. you can feel the vibration ..
pull out the power cord.. count to 10.. plug in the power cord.
If you still have the problem report back.. mostly 98% of cases that will fix it. -
This is the error message that comes up when my computer says that the time machine couldn't complete my backup. Does anyone know what this means?
Regards,
JbyrdksSee here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm -
Im trying ti make an in-app purchase but its not allowing me even though my apple account is set up correctly
Have you checked your Restrictions > http://support.apple.com/kb/HT4213
Kyskyhar3 wrote:
... my apple account is set up correctly
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
OttoTips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress) -
time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?
I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time. -
i am running 10.7.5 on an older MacBook and getting Time Machine error The backup disk image “/Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use. what do i do now?
See Pondini's TM FAQs, for starters.
-
Have OS 10.7.5. Computer off three days and now message comes that Time Machine could not complete backup because the "/volumes/PH's timecapsulPro.sparsebundle" is already in use. Whats that about?
Two Solutions for "sparse bundle already in use" Error
Simple solution (from Bob Timmons):
1. Make sure that no other Macs are backing up the Time Capsule at the time
2. Pull the power cord from the back of the Time Capsule
3. Count to ten
4. Plug the power cord back into the back of the Time Capsule
If Simple doesn't work:
The Backup disk image ... sparsebundle ... is already in use. -
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
after restoring backup on new macbook with time machine Firefox will n to start. It says it is missing profile although profile exists and profile manager will not start. Also reinstalling does not help. Direct after starting Firefox it says profile is missing and then quits Firefox. Please help edit
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
* https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
* http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
All of these steps were followed corectly. But a warning popped up and said that it could not be restored because it is locked with a pascode, and it said we must enter a pascode before we can use it with itunes. What should I do?
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I was backing up my MacBook with Time Machine and using my new (correctly formatted) external hard drive. All was going well when my 2 yo knocked the disk leading to a "failure" by time machine (Latest Backup: Failed). Now the MacBook will not even recognize the hard drive. I have rebooted, tried all I can think of, but no acknowledgement of the drive. The drive itself makes noise and vibrates as if working, but nothing from the Mac. Please help or $100 down the drain... Thank you.
You may have already done these resets in the "tried all I can think of " portion of your post.....if not then here they are.....
PRAM
support.apple.com/kb/HT1379
SMC
support.apple.com/kb/HT3964
.....hopefully that is all that is required.....
Maybe you are looking for
-
Hi, I am uploading data to vendor master. I am using a previously existing program.....requirement was to upload using separate structures. So I copied the same program and deleted unnecessary views in that......that way it would be appropriate for
-
Delete Plot Area in Mixed Signal Graph
Hi, I would like to delete not needed graphs and groups in Mixed Signal Graph but I see when I right click on the graps the Delete Plot Area is disabled and grayed. Could you please let me know how can I delete plots and groups in MIxed Signal Graph.
-
Hello, please i need help with my problem. Is there any way to open pdf files from button? How can i set this in DVD Studio? Thanks for your answer.
-
hi i imported some java classes using JAVA IMPORTER. but when i try to call any method in these imported classes, the client session crashes immediately. please let me know if anyone has something regards
-
HD 7100 1 STB doesn't output thru HDMI
Hi, All. Just received HD 7100 1 STB and after successful activation I can not access the STB setup menu by following the instructions in the manual which calls for connecting the TV and STB via HDMI, turn off the STB and manually press Menu on STB