I-tunes not working in Windows 7

I have been using i-tunes for a couple years without problems.  Recently I keep being told i-tunes is not working and Windows shuts it down.  I have repeatedly reinstalled it - earlier times as a "repair", then have uninstalled i-tumes and reinstalled it, but the problem persists.  Lately it has said something like "Apple Device Manager not installed", but since i-tunes shuts down there is not a way to care for that in i-tunes, if that's where it needs to be activated.

yeah in some cases creating a new iTunes library file could fix issues like that mostly because when iTunes tries to access a bad library file iTunes will take so long to analyze bad information and it eventually crashes for issues like that you should try these articles
http://support.apple.com/kb/TS1421?viewlocale=en_US
http://support.apple.com/kb/TS1717?viewlocale=en_US

Similar Messages

  • Hauppauge WinTV-HVR 95Q TV TUNER not working with windows 8.1 HP TouchSmart 15 Notebook PC

    I've updated all drivers I can find from the manufracturer.  Are there any other HP drivers I need?  This worked fine on Windows 7 without having to update to a 'Pro with Media Center' edition.  I've updated to Windows 8.1 Pro with Media Center.  Another comsumer had their question answered here: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/TV-TUNER-not-working-with-w...
    Was going to ask if there was a driver for the Hauppague tuner there but it wouldn't let me post a question asking if there was one of those drivers for the Hauppauge WinTV-HVR 950Q.

    I updated all drivers to their latest versoins before beginning.  Waiting on response from vendor.

  • Qosmio G40: TV Tuner not working in Windows 7 64bit

    Hi,
    After months of patience and following the drivers-info on the Toshiba website,i found it was time to replaced my Vista32 Ultimate with Windows7 Ultimate. It seemed that all drivers now have a 64bit version working under Windows 7, the missing drivers/software could be replace with the Vista 64bit versions. Unfortunately i got some problems with the TOSHIBA PCI DVB-T/Analog TV Hybrid Tuner.
    Just searched a couple of ours for a sollution to the TOSHIBA PCI DVB-T/Analog TV Hybrid Tuner (x64) problem with Windows 7. In hardware manager it shows an yellow triangle with an exclamation mark, telling me that there is a problem with the device. Via properties i get an error with code(39).
    I have downloaded the drivers from the Toshiba website which returns the following files:
    tisdbt1a64.cab
    TISDBT1A64.inf
    TISDBT1A64.sys
    and an additional 'setISDBTDriverParameters'-regkey.
    1) When i try to replace the drivers by via the properties in devicemanager, i get a message back that the best drivers are already installed and there is no better driver found.
    2) Install manually
    There are no instructions to install the downloaded files, nor the regkey. When i try to install the 'inf' file with rightclick, i get a installationerror the the selected inf-file does not suppoert this installationmethod.
    3) When i try to use 'install old hardware', the system ends in blue screen when driver is selected and installed. After booting the system again falls into blue screen. So i had to remove the device using 'save mode'.
    4) I also tried to install Vista 64bit, same behaviour as (3)
    5) I tried both TV-Tuner 2_1_11-ISDB-T and TV-Tuner-2_1_1_0. However, imho the former should be used.
    Finally i reinstalled the complete system (from scratch) but same problem occurs.
    Any suggestions? I found different threads about only tips are given. Almost no one describes a working sollution.
    I have not found any sollution

    I have read indicated thread over the weekend. This thread also points to other threads which should have info about correctly installing the drivers. Unfortunately, all these threads points to eachother without really telling how to do a correct installation. Some users seems to be able to use the Vista drivers or the G50 drivers but many others don't. It's strange though, all G40 systems should have the same hardware, no? And after installation of Windows7 they are all equal, no?
    I haven't installed the G50 driver because
    - there is no indication about the type of TV Tuner. I have a TV-Tuner-ISDB-T and it seems that the indicated driver is for the 'TV-Tuner' only (without IDSB-T opton).
    - These drivers are dated 2009 whereas the drivers for G40 are from april 2010.
    (although they have a creation date of march 2007 ???)
    - Other users reports same probs with G50 drivers
    I tried the G40 32bit, G40 64bit (Vista and Windows7) but none of them work. With the Vista drivers I got nothing but blue screens which finally forced me to reinstall Windows7 from scratch. I don't want to go to the process of reinstalling Windows7 from scratch again...
    So, the G40 drivers are published by Toshiba in april 2010. I may trust that these drivers are the ones to be used on my machine? If not, why should i trust all other drivers?
    I have noticed that there was an update installed for both TV- and Fingerprint hardware immediatly after installing Windows7. So after installation of W7 and reboot of the system i was notified that there were some updates which includes an update for both hardware components. I installed all drivers and software from Toshiba website AFTER this update installations. This resulted in a problem with both TV- and Fingerprint hardware.
    In my second attemt to install Windows 7, i tried to block the automatic updates immediatly after installing Windows7. Don't know if it was succesfull because installation started immediatly and i had to 'cancel' the installation. After this 'cancel', i wasn't sure if something was already installed. Nevertheless, at that point (with no other updates installed), i installed all drivers and software from Toshiba website (with no reboot in-between). After this installation i rebooted my G40 and all but TV-hardware worked (including the Fingerprint Reader). Then i tried to update the TV-drivers without any luck, untill this moring...
    This morning I was notified that there were updates to be installed. When i checked out which updates, an update for the TV-hardware seemed to be included. I decided to install this update and guess what... problem is gone!
    So here is the list of my 'scucessfull driver installation' with my wireless internet connection active.
    (Maybe it's a beter idea to make sure the laptop is not connected to the internet!)
    Initial installation:
    1) Install Windows7 from scratch
    2) After initial installation, switch-off auto-updates for windows
    If procedure to install updates is started (otherwise go to 4)
    3) cancell automatic update install, be sure that update TV drivers/Fingerprint Reader are NOT INSTALLED
    (eventually go back to recovery point)
    4) Reboot
    Install all available Toshiba drivers and software
    5) Install all Win7 64bit drivers/software (skip TV drivers)
    6) Install all Win7 32bit drivers/software
    7) Install all Vista 64bit drivers/software
    8) Install all Vista 32bit drivers/software
    9) Reboot
    Install TV drivers
    10) Install regkey 'SetISDBTDriverParameters'
    (= i changed the regkey from tisdbt1a to tisdbt1a64)
    11) update 'TV-Tuner-ISDB-T' driver using 'Hardware Manager'
    12) Reboot
    Windows update installations
    13) Execute windows updates
    14) Reboot
    Repeat 13/14 until TV-driver update is included in the list
    It appears that problems are caused by a windows driver update which is installed for both TV- and Fingerprint Reader hardware immediatly after initial installation of WIndows7. I have no time (use my laptop for work too) to re-test above with installation of Windows7 without a connection to the internet. IMHO this should also avoid installation of the autmatic updates immediatly after initial installation. So, if anyone is trying to follow my steps to do a clean installation of Windows7 on a G40 laptop, please do not connect to the internet when initial installation is in progress. Attach to the interne to perform updates after step 12 and let us know the results.

  • Why i-tunes not working with the windows 8.1?

    i have windows 8.1 in my laptop,but i-tunes not working with it.when i connect my iphone with my laptop its not shown in itunes.
    can you please help me?

    See this support document. http://support.apple.com/kb/TS1538
    The latest version of iTunes works just fine with Windows 8.1.

  • The last update failed on my window 7 pc, resulting in me having to try it manually download and install, this also failed leaving my I tunes not working, I tried restore back to a safer date, but every time it tried to update it failed. eventually i

    The last update failed on
    my window 7 home prermium pc, resulting in me having to try it manually download and install,
    this also failed leaving my I tunes not working, I tried restore back to a
    safer date, but every time it tried to update it failed. eventually it told me
    to delete and reinstall, this fails due to the apple mobile device service
    failing to start, and asking me if I have sufficient privileges to start system
    service, I have tried all suggestions on iTunes page, ie delete everything to
    do with apple, and start as administrator, nothing works, help please

    I too have tried the latest iTunes (12.1.1.4) in Win7. I did a search for latent drivers as you noted but found none. I am glad it worked for you - I'm still no-joy at this point. I'm able to install AMDS over and over again, without issue - it just doesn't start then iTunes launch fails with Error 7. I have to manually remove it.
    I am able to connect my iPhone via USB cable and access my photo storage on the phone. I am just not able to install iTunes anymore. I have attempted resolution to this issue for almost two months now. Until that time, I was content with what was installed. It was only when the proverbial update box appeared that I attempted to 'update' my iTunes. WHAT A MISTAKE putting blind faith into an Apple request to update. I SUGGEST NOT TO UPDATE YOUR ITUNES IF IT IS RUNNING PROPERLY!
    I realize now, once again I might add, my reliance on software provided by others. It's like anything else, I shouldn't rely on just one method for anything. Time to search for a more pleasant alternative than Apple. Truly, when it worked, it was good at its job, but now that I am wasting time I am looking seriously at upgrading to another type of smartphone and media management software. Way too much trouble for anything as simple as this should be. I wonder, is this a result of another feud with Microsoft?

  • Tuner not working on my TouchSmart 300

    Situation:  Brand new TouchSmart with tuner not working out of the box. 
    Driver appears to be installed and working, but tuner will not pick up any channels.
    Both ATSC(antenna) and NTSC(converter box used) were scanned and nothing picked up in either mode.
    Both LiveTV and Media Center give same results.
    HP will be picking it up to be serviced. I'm wondering if it's a Window7 Home Premium 64 bit and driver issue?
    I suppose it could be a bad card.
    Driver was uninstalled and reinstalled - did not work
    OS was reinstalled (online chat said that reinstall fixes 5 of 10 computers with this problem)
    Computer:  HP TouchSmart 300 - 1000z
    Driver:  AVerMedia A323 MiniCard Hybrid ATSC version 1.1.64.46
    OS:  Windows 7 Home Premium
    Any ideas?  I really like the computer, I really don't want to deal with the hassle of shipping and setup again.
    Thanks

    This seems like a possible problem with the device access point settings. Are other applications able to connect to internet, for example browser?
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • HP Mediasmart Live TV does not work on Windows 10

    HP Mediasmart Live TV does not work after Windows 10 upgrade.  Error says:  Your TV tuner cannot be accessed because it is being used by another application.  Please close any programs that might be using it and then try again.  Although I am able to open the settings and scan for channels, and I see the channels being found, but still no luck watching after the setup is done.  My HP Laptop has a built in HP ATSC/Analog TV Tuner card.  (AVerMedia maybe?)  I suspect that is may have something to do with the fact that the driver does capture at the same time you are watching (Allows you to pause and then continue watching live TV, also has the ability to scedule recordings)  Unfortunatly Windows 10 also removes Windows Media Center, so I can't check with that software, is also possible a remnant may be left behind to support Windows Media Center that is conflicting with something else.  Also would be nice if they would fix the installers so it does not uninstall the software, then fail to re-install it.  (All without any display or error messages, so your left scratching your head trying to figure out what happened.)  I managed to get the rest of MediaSmart to work, although it looks like the internet veiwer may not connect to anything anymore.  Looking for an updated driver or installer, or patch that would work for Windows 10.  As far as I can tell on the internet HP MediaSmart Live TV is supposed to work on Windows 10.

    OK, More information.   Installed Media Portal 1.  This works with the tuner card without additional modification, so this appears to be some kind of issue with the software.  Media Portal 1 does install a different version of Direct X, I don't know if that could have anything to do with it, but HP MediaSmart Live TV still comes up with the same error and will not run.

  • HP Deskjet 2540 scan does not work with windows 10

    my HP Deskjet 2540 scan does not work with windows 10, however, it still does eprinting. i need the solution and i haven't got it.  

    OK, More information.   Installed Media Portal 1.  This works with the tuner card without additional modification, so this appears to be some kind of issue with the software.  Media Portal 1 does install a different version of Direct X, I don't know if that could have anything to do with it, but HP MediaSmart Live TV still comes up with the same error and will not run.

  • Exporting Crystal Report to HTML is not working in Windows 7

    Hi Sir,
    I am trying to export Crystal Report to HTML format using VB.NET code. Functionality is working fine at Windows XP Environment (Save to Disk, Open an Application and Email Attachment). But the same functionality is not working at Windows 7 Environment (both 32-Bit as well as 64-Bit).
    Below is the code to Exporting Crystal Report to HTML in VB.NET.
    Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions
    Dim CrFormatTypeOptions          As New HTMLFormatOptions
    Dim vFormat As Integer
    Dim CrExportOptions As New ExportOptions
    Dim vRdReport As New ReportDocument
    Dim sfd As SaveFileDialog
    Dim vFileName As String = Nothing
    vRdReport = vRptSource
    sfd = New SaveFileDialog
    If Not (vRptPath = "") Then
        sfd.InitialDirectory = vRptPath
    End If
    sfd.Filter = "Webpage, Complete(.htm;.htm)|.htm|Web Archive, Single file(.mht)|.mht|Webpage, HTML only(.htm;.html)|.html"
    If sfd.ShowDialog = DialogResult.OK Then
        ' Set the disk file options.
         CrDiskFileDestinationOptions.DiskFileName = sfd.FileName.ToString()
    Else
         Return
    End If
    CrExportOptions = vRdReport.ExportOptions
    CrFormatTypeOptions.HTMLFileName = vFileName
    CrFormatTypeOptions.HTMLEnableSeparatedPages = True
    CrFormatTypeOptions.HTMLEnableSeparatedPages = True
    CrFormatTypeOptions.HTMLHasPageNavigator = True
    CrFormatTypeOptions.UsePageRange = True
    With CrExportOptions
                        .ExportDestinationType = ExportDestinationType.DiskFile
                        .ExportFormatType = ExportFormatType.HTML32
                        .DestinationOptions = CrDiskFileDestinationOptions.DiskFileName
                        .FormatOptions = CrFormatTypeOptions
    End With
    vRdReport.Export()
    Catch ex As Exception
            MsgBox(ex.ToString)
    End Try
    Code working fine at Windows XP, But it is not woking in Windows 7 environment.
    Please can anyone share your valuable thoughts or ideas reg. this.
    Thanks in Advance
    Deivanayaga Perumal D.

    user13509659 wrote:
    Run this code to reproduce the issue.Which issue?
    It looks like inheritance is broken in the component hierarchy for JFrame in Windows 7 JDK 1.6.0_23-b05. The only thing remotely related to inheritance in your code snippet is the WindowListener, which does little. See camickr's advice about built-in exit management.
    EDIT - using the post title as a clue, I realize you may be talking about the component hierarchy, and whether the contentPane's background is visible through the upper layers. Instead of guessing, I'd prefer you describe your "issue" accurately (observed vs expected behavior).
    Edited by: jduprez on Feb 10, 2011 1:01 PM

  • Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

    I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
    is the deployment server.
    I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
    Message:There is an error in XML document (1, 331491).
    Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
    The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
    Please provide suggestions on this I need to resolve this ASAP.

    Hi,
    This question is better asked here:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
    Experts here are more familiar about it and they can give you more efficient suggestion.
    Thank you.

  • APPLE mouse & keyboard not working with Windows (Bootcamp)

    I installed Leopard and Windows XP on my Mac Pro. The installation went very smoothly. Only problem I have is that my Apple wireless keyboard and mouse do not work on Windows (frozen) although they work fine on Leopard. I tried a Logitech wireless trackball and it works fine on both Windows and Leopard. Any suggestion?

    Thanks. I upgraded from Tiger and downloaded Bootcamp from Leopard Installation disc ( I did not have a beta version ). I then installed Windows XP SP2 ( brand new, just bought for that purpose ). Wonder if Mac wireless keyboard and mouse are compatible with Window. Everything else work beyond my expectation.

  • Flash player does not work in Windows 8 tiles

    Flash player does not work in Windows 8 start metro tile applications. Flash player also does not work in Windows 8 start tile internet explorer 10 1n windows 8. Flash player does work in Windows 8 desktop internet Explorer 10. I tried all of the recommended fixes suggested by adobe Flash Player Issues/windows 8 page. I have reinstalled Windows 8 operating system.  What should I try next?

    This is a known issue with Flash Pro CC - GM build.
    this crash has been fixed in the update that was released recently. Please update to 13.0.1.808 version and it should fix this.
    Please reply if it still persists after the update.
    -Sujai

  • ITunes 12.1.1 does NOT work with Windows - Fix??

    Hi everyone,
    I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
    After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
    iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

    The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly.  Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components.  It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version.  I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

  • ITunes 9 Home Sharing does not work on Windows 7 x64

    iTunes 9 Home Sharing does not work on Windows 7 x64.
    Getting the following error message:
    Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
    This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
    I've just upgraded my iPhone to OS 3.1 using it this morning.
    Please advise.
    Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
    Ivan Farkas
    <edited by host>

    I am using Windows 7 x64.
    I am running iTunes 9.0.2.25
    I am running Mcafee.
    I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
    YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
    I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
    I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
    P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
    Message was edited by: turcott

  • HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

    I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

    i try to download now, do you think when i download and install the windows support software, can i fix the problem?

Maybe you are looking for

  • LED flashing light and email notifications!

    i just got the curve 9300 and before had the curve 8520 and the flashing LED is so dim i can barely see it on my new one! i have the phone on silent at work and use the LED to tell when i have a notification and i cant even see it in daylight hardly.

  • How can I retrieve old Photo Stream photos from a lost iPhoto Library?

    My laptop was stolen and with it an external drive that had my iPhoto library.  I had an old backup and when I opened the backup and turned on Photo Stream, I saw all my old photos appear again!  After a short while, it was removing old photos from t

  • Number of partitions?

    I'm currently working on a database containing large, (100 million +) amounts of order information. This is due to be re-partitioned as part of an upgrade process. It seems most appropriate to perform range partitioning, but I was hoping someone coul

  • Badi screen exit

    hi all, i have to  add 2 custom fields in the Tcode COWBHUWA . I could not find any screen exits/badi . How can i add these fields . Please help out . Sridhar

  • General Installation Error

    I m tried to install Flash player on Windows XP. Flash Player Version is 11. But after downloading 50% it gives me general installation error. Contents of Flashinstall.log file are : =O====== M/11.0.1.152 2011-10-27+13-32-01.609 ======== 0000 [I] 000