I turned auto login off and set a password. It does not work. I tried using the install disc and C key a few times but no success. Now the install disc does not even activate with the C key. Help

I turned ato login off. Set a password. On login it failed. Perhaps I misstyped when setting up. I used the instaldisc to reset the password but after a few attempts It failed. Was it a mistake to select the hard drive after resetting the password.  I would like to try the alternative but now the C-key does not even let the install disc open, it goes directly to  the name and password screen. I need Help

Keunepete,
When I ordered my books for the ICND1 and ICND2, they came with a CD in the back pocket (sleeve) of the book. Along with the CD was a thick piece of paper that had the activation code on it. It was a white, square piece of paper with big black print on it. Did you buy your book used? Was the CD sealed in the back pocket?
-Zach

Similar Messages

  • IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  Please help

    IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  I did restore the iPad about 8 times during the past 2 weeks.  Just completed another restore.  iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready.  That was 30 minutes ago.  iPad still won't start.  I am looking down the barrel of yet another fruitless restore.  What a crap product.

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • Ichat is not working.  tried using port 443 and still does not work

    ichat not working.  tried using port 443 and i stay on for about 45 seconds then it disconnects.  Can you help?

    HI,
    Can you tell me the make and model of your routing device.
    The 10 Second error message is caused by a break in the connection.
    This could be the Wifi being dropped (if you are using WiFi) due to interference from other nearby routers.
    It can be dues to setting or features of the router and if the experience has changed that could be due to a speed increase in your internet service.
    If you are using Ethernet and having this issue it is much more likely to be a setting/feature issue.
    Examples.
    Netgears.  These have a separate WAN set up page that lists either DoS or SPI as one of the things that can be Enabled or Disabled.
    Linksys.  If your model has a Security tab and this has  Firewall then DoS and SPI are port of this.
    Netopia devices Tend to have a 4 level Firewall which DoS and SPI are part of the two highest settings.
    DoS = Denial Of Service and is a Threshold based "Protection" Feature.
    it judges whether too much data is being sent to you  (it was designed originally to stop people overloading Web Servers (many people, many refreshes).
    iChat can outstrip the setting with most Internet Connections in most part of the world.  (In fact iChat can send more data than most Video Streaming sites)
    One thing you can do that may get around this is to reduce the Bandwidth used in iChat (iChat Menu > Preferences > Video Section > Bandwidth Limit drop down)
    Try 500kbps
    10:07 PM      Wednesday; November 23, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Hi! With version 36 I can no longer download videos; I can watch them, but download does not work. I use Win 8.1 and download helper. I returned to 35.1

    Hello Community of Users
    I actually want help from the experts; and with my question everything is said. As I wrote: I returned to version 35.01 (US - before I had a German version - both worked or work) for the time being; with 36.0 almost everything is fine except that I cannot download videos any more.
    The " educated guesses" seem to be correct except for the Shockwave; at least I couldn´t find it in the list.
    Oh, I forgot: I got a message from my firewall when I had downloaded version 36, stating that it had blocked some features of this app, then listing those features, but giving the possibility to grant access to them ("Zugriff zulassen") on which I clicked. - See uploaded screenshot.
    Any idea where the problem could be?

    Hi edmeister
    thanks for dealing with my Problem. I´m using the latest Version of downloadhelper; I mentioned that I downloaded the US-Version of 35.01, but the screenshot came from my German Windows 8.1.
    I just downloaded 36 again & separately, got the same warning from Windows, clicked again on "grant Access" (Zugriff zulassen), tried out parallel 35.01 - Video download o.k. and 36 - Video download did not function. So I did not get further. The Firewall lets me - so it seems - download with one Version of Firefox and without any changes executed does not let me download with the new one.
    Greetings
    Faustissifus

  • Expose not working with auto-login off

    I've been using Snow Leopard with auto-login logging into my user. However, I recently decided to turn auto-login off so someone couldn't just turn on my computer and be logged in as me.
    When I do this, expose functionality ceases to work once I'm logged in. The track pad and the button (f3) do not execute expose functionality.
    If I change my settings back to auto-login to my user, everything is fine again.
    Any ideas?

    try resetting your dock preferences which contain exposé settings. delete the file /users/username/library/preferences/com.apple.dock.plist and log out/in. your dock, spaces and exposé will be reset to the defaults. configure them and see if it works ok now.

  • [Lollipop] Turning Auto-rotate off forces portrait mode

    In various situations, I like to use my tablet in landscape mode, but turn auto-rotate off (watching movies/streams while lying down).
    I do this using the pull-down quick menu. After the update to lollipop however, whenever I turn off "Auto-rotate", the button's name will switch to "Portrait" and my tablet (and app) will rotate into portrait mode, even if it was in landscape mode when I pressed the button. I reckon this is done with e-books in mind, but for my purposes this makes this feature useless.
    Is there any way to restore the original behaviour (tablet stays in the orientation it was in when you decide to turn off Auto-rotate)? If there is not currently, I urge you to change it back to the old way (other lollipop tablets seem to have the old behaviour still from what I could gather from friends).

    uliwooly wrote:
    That's the way it's supposed to work 
    Well, that just sounds like an opinion. Do you have any source for that? As I said, my friends' other tablets behave differently.
    Is there anyone from Sony around who can shed some light on this or make inquiries? Or is this a users-help-users-only support forum?
    And @Johnny_dee, please don't hijack threads. The whole discussion now is about a whole other topic. Just open a new topic.
    (maybe some nice moderator could split the topic?)

  • My daughter down loaded the new 6.0 software and now her home button does not work.  Tried reloading software and reset to original factory settings.

    My daughter down loaded the new 6.0 software and now her home button does not work.  Tried reseting to original settings and reset the operating software.  Any ideas?

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Keep getting "itunes not working"  when trying to sync my music to my iphone4

    keep getting "itunes not working"  when trying to sync my music to my iphone4

    Just a basic gateway computer from futureshop(bestbuy) I get that message about half way through the sync then it closes iTunes?

  • My Ipod was originally set up as a sub-account of a firends.  After that, I got an Iphone and set up my own Apple account.  I just got a new Ipod, and now can't sync my old Itunes to it. Can anyone help me? I'm even OK with deleting the old Itunes account

    My Ipod was originally set up as a sub-account of a firends.  After that, I got an Iphone and set up my own Apple account.  I just got a new Ipod, and now can't sync my old Itunes to it. Can anyone help me? I'm even OK with deleting the old Itunes account, and staring over.  I just really want to get the new Ipod under my own account, and be able to use it...

    There is no such thing as a "sub-account."  Also, you probably mean iTunes library, when you say "account."  Your "account" in iTunes is your Apple ID, which is what you use to sign in to the iTunes Store to make purchases.  iPods are associated with an iTunes library, not with an Apple ID (iTunes Store account).  You'll need to clarify...
    So, this is what I think you are saying.  You previously shared an iTunes library on a computer with your friend.  Your old iPod was synced to that iTunes library. 
    You got an iPhone, and at that time, you set up your own iTunes library.  Is that on a different computer?  How does the iPhone affect your question about the iPod?
    You got a new iPod.  What is your "old iTunes"?  Is that the iTunes library you shared with your friend?

  • How do I turn auto-correct off and still have a spell check?

    How do I turn auto-correct off and still have a spell check?

    I do not believe this.. you can not disable auto correct without disabling the spell checker.. I am struck dumb by this.. I recently bought a mac for the first time.. ive always used windows.. there are more thngs like this than i expected.. I actually find this so ignorant I am lost for words.. this auto correct is a nightmare for me.. and has already caused me a lot of trouble because I have sent emails where words have been changed and i didnt notice and I have unknowingly insulted people.. i use a regular spell checker quite often but apparently I simply have no choice with safari.. oh well I am going to have to find another browser then.. goodbye safari!.. I also use a lot of shortened words and names etc etc.. like for eg I used the shortened word for problems "probs" and it changes it to "probe" and then i go back and change it back to WHAT I WANT TO SAY and it changes it AGAIN!!!!
    Does anyone else feel like this is yet another example of how, more and more, we are being treated like morons?
    Ok I'll try to stop ranting.. the real point is it should be possible to have a spell checker without auto correct..

  • TS4212 can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.  I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work

    can anyone help please..  since iCloud  came on the scene  My all in one printer  keeps saying  it is not USB connected.   what do I do
    I have been  looking for over a week now   and even chatted  with the USA  but cannot get it to work.
    I am really struggling

    Thanks
    someone named  Eloisa   she gave me   a phone no.   or visit hp.com/uk
    cannot make head nor tale of it all.  I am old.  and find everything hard to undertstand

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

    My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

    Apple Support (formerly ExpressLane):
    https://getsupport.apple.com/GetproductgroupList.do
    https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

  • Hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?

    hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?

    You may need to put the iPad in recovery mode to restore it.
    http://support.apple.com/kb/HT1808

  • HT1414 My WiFi want work - tried turning off and restarting and did not work. Tried resetting All Settings and that did not work. Followed Apple Restoring iOS Software and that does not get it working. Help any ideas !!!

    Anyone help,
    My WiFi stays off, have tried turning off: did not work. tried Restoring settings and that did not work. Downloaded iSO 6.1.3 and it still want work. Any ideas!!

    same my iphone also did not work i tried to restore but its not coonected to the internet.pls i need your help too.

Maybe you are looking for

  • Issues with Search Filter Criteria Button in Search Help

    Hi , I have applied an elementary search help to a select option and this help is having four fields. The search help works fne and all the four fields are visible when i do a F4. Now , if i want to restrict the number of entries shown (the number of

  • ECC document creation timing  for mismatch values in ECC and Bw report.

    hi gurus, i am extracting data from ECC at 10.pm (ist) and my process chain should start to load data at 2.30 am (ist) then in morning  i am refreshing BW report try to reconcilied from my extracted ECC but i am finding so many mismatsh values. so i

  • Failed to parse method name:

    Hi, I've the following environment: - Sun Solaris - WL 61 without service pack - jdk 1.3.1 I wrote a simple Session Bean and make it IIOP enabled. For the Java-Corba client I use an IDL which describes the interfaces of the remote and home interface

  • Reason 3.0 with Logic 7.1

    Can anyone Tell me, why when I first open Logic 7.1, and do all that is need as far as re-wire, whey Reason 3.0 is saying that it cannot connect to Reason engine, and the Reason Engine is already in use, to make sure You only run one instance of Reas

  • Generating and updating URS, FRS and test

    Hi folks, I am trying to find some material in this regard i wanna know what is generating and updating URS, FRS and test script documents Pls anyhow help me its very urgent Thanks in advance and waiting for u r answer prasad