I unplugged my usb without ejecting it and now when i plug the device back in it won't see it
i unplugged my usb without ejecting it and now when i plug the device back in it won't see it
Click on the desktop, then go up to the Finder menu > Preferences... > Sidebar > and check all the boxes under Devices.
Similar Messages
-
A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?
The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose. -
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
my computer was re-imaged for school and now when i plug in my iphone it doesnt show up on itunes. Any solutions??
Can you connect a USB memory stick to the school's laptop?
-
I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures?????? When I have 500 pictures on it!!!!! Im soooooo mad I did the update! Worst decision ever!!!!!!!!!! I am SOOOO ready to leave the IPHONE alone- maybe throw it in the river or lay it on the train tracks. Its been NOTHING BUT TROUBLE since the update!
Just to be clear: Tap on the Photos app to start the app. Then tap on Albums at the bottom of the screen. You might have several albums but only one is named "Camera Roll." Are there photos in that album?
If there are NO photos in the Camera Roll album there are no pictures to import. The remaining albums might have come from a sync with your computer or they might be your PhotoStream.
If there ARE photos in the Camera Roll album, connect your iPhone to your computer and start your camera application on the computer. Your phone should be recognized as a camera. -
My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.
I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!
-
What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...
Go to
> System Preferences > Keyboard
Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough: -
Ipod classic has been wiped saying 'no music'etc.
Cannot see it on the 'device list' in my itunes. I have tried restoring to factory settings and reloading...it reloads some of the music, but when I plug the Ipod back in, it wipes it again. Ocassionally Itunes freezes when I plug in the Ipod.Make sure your headphones are plugged in all the way, meaning you cannot see any of the silver still showing from the headphone's plug.
A feature of the Nano is to put it to sleep when the display goes out and it does not detect any headphones.
B-rock -
i just installed itunes 12 and now when i plug my ipod into my computer it won't sync I have tried different ipods still nothing
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
I had to reinstall itunes and now when I plug in my ipod itunes does not automatically open to my library or where I can access the itunes store. What do I do now?
Open iTunes and connect your iPod. Select your iPod in iTunes from the Source list. (I'm assuming this still works, although you didn't indicate if it did or didn't.) Make sure the box is checked to Open iTunes when this device is connected. You should be all set!
-
I just updated my iTunes to 10.5 and now when I plug in my iPod touch and iPad it won't sync or even recognize them? Help!
having the same problem, my wifes is just fin and mine is invisible
-
I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone? Also why is it forcing me to set up as a new iphone, why doesn't it recognize it like it did before I upgraded iTunes. I'm afaid I will lose all my apps, music, pictures etc. please help. thank you.
You are correct. Corrupted files are in the backup. If you've already restored the iPhone it has been erased and starting over is the way to go in order to eliminate the corrupted files.
Hope that helps -
I recently got an extension cord for my ipad charger and the first time I used it it worked and now when I plug it in to my ipad It doesn't do anything. What do I do?
I think that we all understood what you meant. If the extension cord is no longer working, then return it.
We are all trying to tell you that you can plug the power block into a standard household extension cord - using the short cord that came with the iPad - and there is no need for the extension cord that you bought.
Edit - one upped by the lovely lady with the pretty kitty avatar -
I plugged in my ipod touch 4g to sync with my macbook pro and itunes sent an error saying itunes cannot read your ipod please reset your ipod, so as suggested by itunes i reset my ipod and now when i plug my ipod in itunes doesn't even recognise it and doesnt sync with it
Hello frankini
Continue your troubleshooting with the article below to resolve issues with your iPod touch not being seen in iTunes. It will walk you through checking the drivers as well as any security software that may be blocking it.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
I just installed Readdledocs on my ipod, and now when I launch the app, I get a screen which says "downloading message" and the app freezes and won't do anything else. How can I get the app to function again?
This happened after I tried to get Readdledocs to open an epub file which I created in Calibre.This is a followup to my own posting above.
Thanks to Dave Sawyer for posting information about re-downloading an app which has been deleted. I deleted the app from iTunes. Then, when I synched, iTunes asked me if I wanted the items on my ipod touch copied back into iTunes. I said yes and then synched.
Readdledocs is now working again. It is no longer frozen. However, I have learned my lesson. I will download only pdf's from now on. I don't think it works so well with epub files. The text reflow feature of Readdledocs is exactly what I need to use for my work documents on my ipod touch.
Maybe you are looking for
-
Solution Manager - Central Monitoring
Hi, I keep on hearing the buzz word that Solution Manager would be used as central monitoring from PI 7.1 or later. Can anyone explain more about this? I was assuming that solution manager is just to store all the documents and processes. Regards Kri
-
P2 Clip Problem - Incomplete Clip
I transfered the contents of a Firestore drive to my computer, and then imported all the files through the P2 import window in FCP 5.1.4 (pretty sure). I never recieved the "one or more P2 clips failed to import; probable incomplete or corrupt clips"
-
Hi All, I am having a real issue with compilations and would greatly appreciate some help. I have an album where the artist has a couple of songs with guest artists and these are not showing up in my phone. So, to fix this I selected the album, went
-
CS6 web&design prem install (win7-64b)
Hello, I have troubles to install the suite i've just purchased. Dowloading is allright (I tried the two different ways : http & dwl manager). Extraction allright too. But when I run the .exe file, it stops and say maybe I miss a file, reboot, close
-
Anybody tried to repair an iMac G5 motherboard?
Our iMac G5, the first version, just died a couple of months after the end of our Apple Care subscription! Sic! Anyway after consulting some serviceproviders we had to accept the death of the motherboard, but the last serviceperson we asked, asked me