I updated iphone 4 to ios 7.1 and the camera doesn't work. what can I do?

i updated iphone 4 to ios 7.1 and the camera doesn't work. what can I do?

First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.
If this does not help, and to rule out a software issue, set it up as new device without using the latest backup, in case that backup contains corrupt data.
Is the camera working after that, restore from the backup. Is the camera still not working, this might be a hardware failure and you'll have to get the phone serviced by Apple:
How to back up your data and set up as a new device
iPhone - Contact Support - Apple Support

Similar Messages

  • Hi, I have a Macbook Air OS X 10.10.3 and the cam doesn't work. How can I fix it?

    Hi, I have a Macbook Air OS X 10.10.3 and the cam doesn't work. How can I fix it?

    How to Troubleshoot iSight - Apple Support

  • I can´t turn off my ipod touch and the camera doesn´t work

    I can´t turn off my ipod touch and the camera doesn´t work..How can i turn it off if any button works?

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • My iPhone 4s will not ring and the ringer is on.  What can I do?

    My iPhone 4S suddenly will not ring even when the ringer is on and the volume is loud .  What can I do

    change your ringtone and see if you hear the new tone when you select it.   if you don't hear anything, your speaker might have gone bad.

  • I need to backup my iPhone, but it is locked and the touchscreen doesn't work

    So I dropped my 3 year old iphone in the toilet and now the touchscreen doesn't work.  I want to backup the information so I can transfer my apps to the new phone, but I have my phone locked and I cannot enter the code because, as I said, the touchscreen doesn't work.  How can I back up my old phone?

    If you back it up using the computer it normally syncs to, you won't be prompted for the passcode. If you have not been syncing it with a computer, then you're pretty much out of luck at this point.

  • I upgraded to IOS 5.1 and the phone doesn't work right

    I upgraded my phone to IOS 5.1 and the phone functionality doesn't work right.  If I make a call, once connected I go back to the main menu and can't get to the phone controls (including the ones to hang up).  If I receive a call, the wheel comes up, the phone does not ring and I can't answer it.  I tried restoring the phone, but that did not work.  Does anyone have any ideas?

    Press the camera icon and slide it up.

  • Yosemite and Photoshop Elements doesn't work. Can anyone help

    I have recently updates my mac software to Yosemite and Photoshop Elements doesn't work. Can anyone help

    Hi,
    We sincerely apologize for the problem customers are facing while using a trackpad with Photoshop Elements 11 & 12 on Mac OSX 10.10 (Yosemite).
    We have been actively working with Apple to resolve this problem as quickly as possible. We're hopeful this will get completely resolved in an upcoming update of Yosemite(MAC 10.10).
    In the meanwhile, you have two options to work around this problem:
    1. Option1: Use a mouse instead of the trackpad
    2. Option2: Install a plug-in which should workaround the problem
    Plug-in installation instructions:
    1. Close Photoshop Elements
    2. Download this zip file to a location you can easily find (e.g. your desktop)
    3. Unzip the file, WhiteWindowWorkaround.plugin, and move it to the Plug-In folder:
    • For Elements 12 – //Applications/Adobe Photoshop Elements 12/Support Files/Plug-Ins/
    • For Elements 11 - //Applications/Adobe Photoshop Elements 11/Support Files/Plug-Ins/
    You can verify the plug-in is installed by launching the Photoshop Elements Editor and choosing Help > System Info... Scroll to the bottom of the text in the dialog and look for the plug-in name "WhiteWindowWorkaround.plugin".
    Note: This plugin is a temporary workaround and should be used until this issue is addressed in Mac OSX 10.10 (Yosemite). Please remove this plugin once the issue is officially resolved by Apple.
    If you are using a stylus in conjunction with a trackpad, you might see issues with your trackpad. Workaround in this particular case is to use mouse instead of the trackpad.
    Hope this helps!
    Regards,
    vaishali

  • TS1702 My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.

    My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.

    What model iPod do you have? If yo have a 2G iPod. many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.

  • Hi, I wanted to up upgrade my iPhone 4 from ios 4.1 to ios 5.1.1 and now i'm stuck in recovery mode and the restore doesn't work

    Hi, I wanted to up upgrade my iPhone 4 from ios 4.1 to ios 5.1.1 and now i'm stuck in recovery mode and the restore doesn't work
    I tried to restore with ios 5.1.1, with ios 5.0.1 and with ios 4.1
    none is working

    Mcloulou34 wrote:
    Oh my god, it finally worked ! I restored on an old PC and it worked !
    Thanks anyway for your help.
    But allow me to extend to you a simple reflexion about the jailbreak (even if my iPhone wasn't... except if my little cousin jailbreaked without me noticing the advantages or disadvantages) : Would you refuse an alcoholic trying to go to rehab ? Would you really let someone trying to restore a cellular phone die without it, because he went on the bad side a couple of years ?
    Not a great analogy, but this is a user-to-user forum, and Apple will not allow discussion of jailbreaking; if someone tried to help with jailbreaking the message would be deleted. However, if you have a jailbroken phone Apple will generally not block a discussion of how to unjailbreak it. The only problem is that not all jailbroken phones can be restored successfully; it depends on the method of jailbreaking (which I can't discuss without THIS message being deleted).

  • I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help

    I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance

    You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
    If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again.

  • HT4061 I have an iphone 3gs - the new ios 6.1 (?) upgrade has inabled my phone. I get a white apple on the screen. can't reset phone - doesn't work. what can I do besides take phone into Apple?

    I have an iphone 3gs - yes, an older iphone. 
    This morning apple had a msg that asked if I wanted to upgrade to the new ios 6.1 (?).  I said yes.  Now I can't use my phone.  I've tried hitting the power and other buttons.  I get a white apple on the screen. can't reset phone - doesn't work. what can I do besides take phone into Apple?  This *****!  I realize (now from reading internet) that my phone/system may be uncompatible.  Help!

    I have a 3GS (a true classic design!) and have upgraded it to 6.1 today.  The process did not go without a glitch - it took a few attempts to get the app's to sync but after detecting the ones causing an issue and deleting them it works - so far!  I have had issues about 50% of the numerous times a new OS is uploaded to this phone and always take the new OS with trepidation.  But at least you know there is a 3GS with 6.1 working OK.
    I suggest you do a fresh restart to the phone several times - without it being connected to the computer - to see if it gets its act together and starts.  I think it will.  Hold down the top 'power' button and front round control button until it shuts down - goes blank and dead.  Then press the top power button to re-activate - reboot - it.
    If that does not work then plug into your itunes computer, navigate in iTunes to see your iPhone and hopefully you will be able to sync it or at least 'restore iPhone' from the 'summary' tab.
    If you can not get onto the iphone perhaps you will still be able to sync if in iTunes by going - 'file' - 'devices' - 'sync iphone' or failing that try transfer purchases' and ultimately 'restore from back-up'.
    I had technical problems with my old 3GS (suffered a failed wireless antenna) so I took it to an Apple Store and they issued me with a service-replacement/reconditioned phone for a very modest charge.  So if worst come to the worst get a new phone that way!

  • My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

    My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

    I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited.  In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items.  I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible.  I simply deleted that item and now I don't have the situation you described and my wireless is connected.  Hope this helps!

  • HT4061 i bought an iphone 3g for cheep and when i turn it on it tells me your iphone could not be activated because the activation server is unavailable what can i do to just have it working legit ??  , please anyone that could help me out

    i bought an iphone 3g but not in a shop and when i turn it on it tells me your iphone could not be activated because the activation server is unavailable what can i do to just have it working legit ??  , please anyone that could help me out

    Generally, that means the phone has been jailbroken (hacked). You can try restoring it as new using iTunes. Beyond that, there's really nothing we can advise as jailbroken phones can't be supported on these forums.
    See also Lawrence's post in this thread:
    https://discussions.apple.com/thread/5186252?tstart=0
    Best of luck.

  • I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

    I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

    Hi Jboudet,
    Welcome to Apple Support Communities.
    You can find some suggestions for troubleshooting your iPhone at these links:
    iPhone Assistant
    http://www.apple.com/support/iphone/troubleshooting/
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Have a good one,
    Jeremy

Maybe you are looking for

  • Problem in select query

    Hi Friends I am using a table a981 and fetching data in internal table but the table has a fieil Country whose technical name is ALAND in dev and LAND1 in production.Now i cannot use LAND1 as it wont let me to activate the report and if i use ALAND i

  • I can't copy and paste from Word to the Internet (Firefox or Chrome), but I can copy and paste from Internet to Word

    I suddenly can't copy and paste text from Word to the internet (Firefox or Chrome, email or other websites), but I can do the reverse. Any ideas? Copy and paste works between Word docs, and it works between internet sites (e.g., web page to email), j

  • Lost - Need Info

    I didn't update the email address in the form I filled out for service. I wrote support but didn't get a response. Does anyone know how to get the address I am supposed to return the Nano to for service? Or how to get the address to return the Nano?

  • Service Battery after upgrade 10.8, what's wrong???

    After upgrading to 10.8 (and now 10.8.2) my battery icon show "SERVICE BATTERY"!!!! What's wrong???? Just 36 cycles count, and from 5018 to 4860 mAh Full Charge Capacity (after about 2 days) Please help, Thank you!!!!!

  • DAQ Problem

     Hallo everyone I have a problem, I try to provide a task in order to mesure the Voltage with the help of the DAQ-Card. normally under the list " Supported one physical channels" should indicate the available channel of all existing DAQ-Card. however