I updated my 3gs to 6.1.3 now I can't get mail the phone constantly restarts itself and I can't get it to Restore thanks Apple what can I do?

I updated my 3gs to 6.1.3 now I can't get mail the phone constantly restarts itself and I can't get it to Restore thanks Apple what can I do?

Im having the same problem, I updated my Iphone 4S to 6.1.3, shortly after that my phone had no audio. It was working fine one minute and then stopped. Was listening to music when sound gave out on me. It wont ring, phone just vibrates even after turning off vibration option. I've tried all the options listed and nothing. My phone has never been jailbroken either. If I connect the earphones is works perfectly. On one of my last calls received, phone's ringtone was heard for about 2 seconds before muting and just vibrating. Ringtone sounded perfect, speakers did not sound damaged. 
What else could be done? I've read several post regarding this and it seems like Apple has no solution to this yet. Very dissappointed.

Similar Messages

  • Hi, I was given an iphone 3gs. Upon trying to sync with itunes I discovered that the phone has actually been jailbroken. I cannot get my iphone to work at all now. Does anyone know what to do?

    The phone has given me a 1015 error - unknown error has occured, during the firmwre comfirmation.
    We have tired the tricks with holding the home button down for 10 secs etc, we have tried installing a number of different versions of itunes, but no joy.
    We did do a backup of the phone before trying to sync it but can't re-install that either.
    I have been told the only way to get the phone functional again is to re-jailbreak it, do a back up of that and try to udpate back to the apple IOS from there but the phone is not responding.
    It turns on, and is in emergancy mode only, wehn I put hte sim in it's not recognising it, all it wants is to connect to itunes, which it wont do when you try.
    I don't know what to do try next, at a dead end here.
    I don't want a jail broken phone, I just want it to function like its meant to but at this stage I will settle for a phone that works at all.
    Any suggestions,,,,,,,,, anyone??
    Thanks for reading and considering my problem.

    Have latest version of iTunes installed and running. Also make sure you have internet access working and can access Apple websites. Also, make sure you don't have any entries in your hosts file referring to gs.apple.com....If your not sure about how to do that, go ahead and do the rest first. You can come back to that later.....Plug in phone. Put phone in DFU mode.(google put iphone in DFU mode for instructions) Then restore the phone in iTunes by highliting your device in the left column and click on the Restore button. The latest iOS version is 4.3.3. That's what iTunes will restore it to. When it's done restoring, iTunes will ask if you want to restore from a backup or setup as a new phone. I would use the Setup as a New Phone option. Once it's done, you should have a clean install of the iOS and an operating phone, as long as there are no hardware issues with it.

  • I took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer. how do i get it to finish updating or turn on?

    i took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer and it just has the apple icon on the screen. how do i get it to finish updating or turn on?

    Why would you do that when your phone is updating?
    Your phone is in recovery mode If you can't update or restore your iOS device

  • Heey i bought an iphone 3gs about 2-3 months ago (used) today i blanked off the phone itself and then tried to get the newest update cuz i wasnt able to before so i did and now im locked out and it says sim failure invalid sim i can even get into it :(

    heey i bought an iphone 3gs about 2-3 months ago (used) was in mint condition well taken care of not even a scratch as soon as i got home i tried syncing it to my computer but didnt work it didnt even sync or notice my iphone software .. so i went to my friends and synced it there it has been working for music but videos wont work? but i didnt care  and then the pop up that says update so we would click it wait and it wouldnt work ever since ive had it so i left it like that so i went to my friend today i blanked it off the phone itself and then tried to get the newest update cuz i wasnt able to before so i did and now im locked out and it says sim failure invalid sim i can even get into it PLEASE HELP and cant get a new sim at the moment or take it into the apple store because i live about an hour and a half away from the city and rarley go to it please help me !!!!!!!!!!!!!!

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
    If your iPhone was hacked/jailbroken the update restore the lock.

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

  • My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

    Hi all,
    Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
    Anyway,
    I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
    Mine doesn't.
    I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
    As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
    I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
    I have had this phone for several years and it has never done this.
    It worked absolutely fine, until I loaded the latest version of iTunes it seems...
    Any suggestions?
    Many thanks

    ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
    (I use iTunes 11.1.5.5)

  • HT204053 I cannot use the password to update apps on my second IPhone.  It only works on one of the phones. They both have the same Apple ID and password.

    I cannot use the password to update apps on my second IPhone.  It only works on one of the phones. They both have the same Apple ID and password.

    If it really does not work, change your password here https://appleid.apple.com (Manage account) and try to add the account again. I hope it helps.

  • I updated my iphone 5 through Itunes but an error occurred during installation on the phone that read -42110. Now the phone has a usb icon and itunes icon and is not recognized by itunes or my computer (windows 7). I uninstalled and reinstalled. no luck

    I attempted to update my iphone 5 through itunes. Itunes backed up the phone. However, when it tried to install the updated software an error message displayed -42110. Now the iphone is unresponsive with a usb icon with an arrow pointing to an itunes icon. The computer makes a connection noise when I hook the phone to the computer but it does not appear to be recognized. It does not appear in the My Computer section. Itunes does not recognize it either. I disabled my security software. I uninstalled itunes, Bonjour, Quick time, apple updates, Aplle mobile updates ect. I reinstalled Itunes and the program still does not recognize the phone.

    If you uninstalled and reinstalled iTunes, did you follow the steps in this support document http://support.apple.com/kb/HT1923 exactly. Check and make sure.  If you did, then try this support document to get the phone into the Recovery mode. It may take more than one try. http://support.apple.com/kb/HT1808

  • When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

    When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006

    Hi Willy,
    Welcome to Apple Support Communities.
    The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
    Resolve iOS update and restore errors
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    I hope this helps,
    -Jason

  • Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • HT201210 taking to long to update. what if i dnt want to restore it? what can i do because now when i switch oon it it says connect to itunes

    taking to long to update. what if i dnt want to restore it? what can i do because now when i switch oon it it says connect to itunes

    I have very similar problem, have you resolved yours yet?

  • HT4623 i have already did the update and the i clicked on install now then they told me that the phone is oing to restart and it didn't work the apple signe is always appearing

    i have already did the update and the i clicked on install now then they told me that the phone is oing to restart and it didn't work the apple signe is always appearing

    Reset, hold both home and power buttons for about 10 seconds until the iPhone restarts itself. If still problems, Restore iPhone again with iTunes on computer. If you have trouble, put iPhone into Recovery Mode. Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes.

  • Just to version 7.Like all updates,ad-ons get disabled.The ad-ons that was disabled,where I am not able to open my emails.Why can't FireFox have updates without disabling ad-ons we need to work with?

    Just to version 7.Like all updates,ad-ons get disabled.The ad-ons that was disabled,where I am not able to open my emails.Why can't FireFox have updates without disabling ad-ons we need to work with?

    ''guigs2 [[#answer-672422|said]]''
    <blockquote>
    NoScript stops cookies, please disable this addon/extension as well as make sure that the language en-us is installed.
    # 1) Open up the Firefox Preferences tab. You can do this by typing about:preferences in the URL bar.
    # 2) Click "Content"
    # 3) Next to "Languages", click "Choose"
    # 4) Select "English/United States [en-us]", click "Add"
    # 5) re-open "about:accounts"
    # 6) Click "Get Started"
    </blockquote>
    Thank you for replying. Unfortunately, I already did all of these things. As you can see from the below screenshot, the language is already set. Also, this screenshot was taken in Safe Mode, so NoScript is not enabled. About:accounts still says I need to enable cookies for some reason. So, this solution didn't work....

  • Cannot Get Mail - The connection to the server failed. iPhone 3GS & Hotmail

    I've got an iPhone 3GS and I'm using Hotmail.
    I'm geting the same error message over and over - "Cannot Get Mail - The connection to the server failed.". Out of the blue it started on my phone, but then the email worked again for a day after, and then quit working again. I've tried deleting and adding it as a new account. I tried to go back to what might have in-part caused the problem, and the only thing I had done over the weekend was to turn iCloud on and start backing up to it, but the e-mail did work after that for a couple days. I've tried a couple different Hotmail accounts to see if it was a corrupt e-mail in one account, but both accounts give me the same "Cannot Get Mail" response. Creating the "TEMP" folder on Hotmail and moving e-mails there did not work.
    Could anyone spell out in layman's (non-IT) terms what I might be able to try?

    Who is the provider? Do you have two-step verification turned on? Did they change something on their end?

Maybe you are looking for

  • Question about import the work repository

    I am trying to import a work repository from server B to server A, originally the work repository in server B was imported from server A, I did some modification in Server B, and export it, now I am trying to import it back to server A. I get the err

  • Exchange 2013 recipient filter working bad

    Hello, I have seen, that the recipient filter in Exchange 2013 is working a Little bit different like in the older Versions. Here an Example (Exchange 2013): <<<220 EX2013.test.local Microsoft ESMTP MAIL Service ready at ..... >>>helo test <<<250 EX2

  • Regarding smart forms- new page

    i am having a parameter kunnr(cusotmer number) in selection screen. I am displaying the output in smartforms with (customer details ) in one window ( secondary window) and following details in main window. sales order, creation dt, net value, status,

  • Problem in RSA3 with FI_AR_4 extractor

    Hi Gurus!!! I have a problem when I run the extractor FI_AR_4 in the transaction RSA3. The message is "Customizing table of period indicators is incomplete Message no. 12145" Any suggestions? Thanks a lot!!!! César.

  • Version control (lvcompare and lvmerge) for projects, classes and libs?

    Hi everyone Version control for classes, projects and libs (not just a plain .vi) - can it be done with lvcompare and lvmerge? I've tried a simple "LVCompare.exe project1.lvproj project2.lvproj" and it only returns an error (lvcompare.exe vi1.vi vi2.