I updated my iPhone to iOS 7.0.5 and I lost my messages and camera app and other apps i downloaded from app store. I was having the problem of losing apps since before I updated to the latest IOS. What should i do?
I updated my iPhone to iOS 7.0.5 and I lost my messages and camera app and other apps i downloaded from app store. I was having the problem of losing apps since before I updated to the latest IOS. I have tried enable and disable restriction, connecting my phone to my laptop and sync from my computer and none of them is working. What should i do?
Often when this type of thing occurs with missing default apps it is due to a situation where you are unable to 'see' the apps. If you will go to your front display of your device go to settings>General>Reset>Reset Home Screen layout.
This reset allows for your apps that have for whatever reason been hidden in such an area as you arn't able to find them now to be returned to the area as which they were when you first had the device.
As far as the missing Apps that were purchased through the Apps Store if you will go to settings>itunes and Apps store and click where it reads about automatcally downloading apps clicking on the toggle switch AND clicking on the toggle switch which allows for cellular data to be enabled this then will effectively automatically download all apps to your device that was purchased from the App Store.
Good luck friend.
Similar Messages
-
Is it safe to make in app puchases in a game downloaded from apple store (a game named "lawless" per example) or my card may be hacked???
You can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
To try and stop it happening again you can use Settings > General > Restrictions on the device to prevent in-app purchases being made, and you might (depending upon its iOS version) also have a 'Require Password' option on the Restrictions screen that you can set to 'Immediately' so that your account's password has to be entered for each download from the store. -
I updated my iphone 5 to ios7 on Sunday and have been having m?ajor problems with my phone since. It keeps freezing and I have to constantly press the home and on/off switch to get it to restart. I had updated my itunes and backed up the phone before doing the update. I'm getting very frustrated at this stage as the phone is practically useless. Is it worth doing a restore? Bearing in mind that I just tried to do that and got a message to turn off the 'find phone' feature in settings and when I tried to get into settings the phone froze again.
I don't have a good answer for you but reading these forums, it seems that network drives can often cause problems with iTunes like you describe.
Patrick -
I can't transfer apps ( games ) from my iTunes library with my PC computer to my iPad. I already authorized computer, sync, but it can't installed apps that I've dowload before with my computer from iTunes to my iPad. Why?
Hi all for those still poping over to this topic, here is one problem that has not highlighted in the forums.
if you have used different accounts to download different apps into your ipad/iphone you need to authorize the computer for both accounts.
eg. [email protected] downloaded 'angry birds' and [email protected] downloaded 'money converter' both accounts need to be authorized on the computer will you then be able to transfer all the apps.
this works if you also used more then 3 accounts to download apps to your ipad/iphone. if you can't remember which accounts downloaded then i can't really help you there haha.
hope this helps! -
After downloading the latest version of iTunes and updating my iPhone, everytime I turn on my computer I receive a message that reads: "AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite.dll" Help! Does anybody know what this means and how I can fix it? Thanks.
Yes. I just solved the problem on my PC. Here goes...
Issue: My Windows7 computer was producing the pop up box with the error text as you described.
The Problem: You have another application on your computer that uses the like named .DLL file... in this case a DLL supporting SQLite on your local PC.
Solution:
1. You need to use the Windows File search feature to look for the name "SQLite". This will quickly locate the offending DLL in the other application.
2. Decide which program you like the most, in my case "Mobile Me", and uninstall the offending application.
3. Uninstall Mobile Me.
4. Restart your PC.
5. Reinstall Mobile Me.
6. Mobile Me should sync at this point, but if not, restart the PC once again.
In my case, the offending program was my Aptana Studio development application. I had recently the SQLite3 database to my Ruby On Rails configuration...
This is where the file was located:
C:\Users\<USERNAME>\Aptana Studio 2.0\plugins\com.aptana.radrails.sqlite3.win32_3.5.7.1278709071\vendor\SQLite3.d ll
I hope this helps,
Ron -
Since updating my iPhone my Macbook will not sync I believe its because I am on OSX10.5.8 can i download the new OSX software?
You will need to upgrade to Snow Leopard 10.6.8 in order to update iTunes to sync with your iPhone.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479 -
Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card and the same.why???????
I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
What happened is that my garage band looks like it will open then it shuts down.
I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
I really hope I don't have to erase it.
It'll say it's ,lading my songs then it shuts down .
If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
Thank you
Simachyahi -
Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
RogerHi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
Thanks
Roger
[email protected] -
Guys, good evening!
What is the most recently (or the best) iOS for the iphone 3G?
Nowadays, I'm using the 4.2.1, but I'm having some problems to install apps from Apple Store because this iOS is not compatible with the apps.
Thank you very much...Thank You Niel!
And if I install another version (eg 4.3), can I damage my iphone?
This is the version required by the Apple Store when I try to install apps.
For you understand better my problem, I'm not able to install simple apps like facebook and skype
What do you advise me to do?
Best regards,
Jocemar -
Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resolve the problem, because each update only worsens the operation. I look forward to a quick, effective and definitive solution. Thank You. Ester
Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resolve the problem, because each update only worsens the operation. I look forward to a quick, effective and definitive solution. Thank You. Ester
-
Since updating my Iphone 4 I cannot figure out how to delete old messages. There is no edit button. Can anyone help?
By "sending" do you mean sending email?
If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
To my knowledge, there is no global iOS setting for this. Some apps may have different rules, of course. -
When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.
If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa
-
Hi. I've tried updating one of my apps and I received this message: "there is not enough available storage to download..You can manage your storage in settings." Anyone else having this same issue?
Well, if you don't have enough space, then there's nothing wrong, right?
You can check available space under Settings> General> About or by plugging it into iTunes and looking at the color-coded bar. -
I have not backed up my computer using Time Machine since before I updated to Mavericks. It has been "preparing backup" for a half hour at least and shows no indication of how long this may take. Is something wrong?
No. TM has to look through your entire drive contents and copy them all. This will take some time.
Once the first backup is made, then subsequent backup will be much quicker, depending on how much data has changed since the last one. -
The problem is that when I try to update my NI-DAQ drivers from 6.5.1 to version 6.7
I have a Win95 based system running Labview5.1 which utilizes the PCI-6025E board with the BNC-2090. The existing version of NI-DAQ drivers is 6.5.1. The problem is that when I try to update my NI-DAQ drivers to version 6.7 I receive the following errors:
1.The new software goes thru all the installation steps upto the point where it displays the message that it needs to restart to complete the installation.
2. The system then reboots and displays the message," Completed Updating Window Files"
3. Then I receive an error:
'Rgdaqhce' performed an illegal operation and will shut down.
4. The window closes and brings me back my normal Desktop display. The NI setup window appears and displays" Installing: Please Wait".
5. Then it goes thru the NI-DAQ setup normally, choosing the PCI-6025E and the BNC 2090 doc options.
6. WHen it gets to the point of selecting Documenatation PAth, Error: NI-DAQ SETup
Cannot find installation information for :322153.
At this point I just choose OK.
Then it proceeds where it request the Development path, LAbview 5.1 and then it proceeds to copy all the files and then states "Installation Complete" and are ready to configure MEasurement & Automation Sys.
7. The Measurement & Automation window appears:
DATA NEIGHBORHOOD
DEVICES & INTERFACES
SCALES.. WHen I click on any one of the above I get the following message:
" The configuration file has been updated from a previous system. If you save changes to this file it will be permanently upgraded to the current version." At this point I choose "OK"
8. Then it states.."you must reboot for the changes to take effect. Would you like to reboot? YEs or No!". where the Data Neighborhood folder never opened..
9. If you choose YES, the system reboots. If I open Measurement & Automation and click on Data Neighborhood again, I get the same above message as in #8 above. If I choose No at anytime to reboot, I get the following Error:
" Explorer- Illegal operation and it will shut down"
Then Measurement & Automation shuts down and brings me back to my windows desktop.
SO no matter what happens I can never get into Data Neighborhood, it keeps going into this cycle.
So I removed NI-Daq version 6.7 and re-installed version 6.5.1.
What recommendations may you suggest in upgrading from NI-Daq 6.5.1 to 6.7 on this system? I would like to take advantage of NI-DAQ 6.7 new feature where LAbview for Windows Data Acquisition Library LLBs now contain function calls to a dynamic link library called LVDAQ.DLL, where the benefit of changing the VIs to call DLL functions instead of code interface nodes, CINs, where thet VI load time is dramatically improved.
Any help with this matter would be greatly appreciated.
In the meanwhile I am searching your support page here to see if there are any similiar situation..I have not come across any as of yet.
Thanks for your help and sorry for such a long email.Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks
Maybe you are looking for
-
E-mail messages sent, are received not in the paragraph-form as sent, but
Dear Friends, E-mail messages sent, are received not in the paragraph-form as sent, but are broken-up into small segments, one line finely printed, the next line may appear with just two or three words printed on it, then the next line will show a fe
-
Empty file in sender comm channel
i have issue with the empty files coming from the sender which are getting processed and getting saved in given file location. Now the problem is,these files donot contain data and rather just gets outputted with header and trailer with some dummy da
-
I have a small hosting company and was wondering what is required to be installed on a Win2k Server to host Java Servlets and JSP pages for a client of mine?
-
Need a ZENworks Inventory report (any report) that features the Organizational Unit of the workstation object(s) in question. Need to be able to sort or filter on Organizational Unit; can't find one. Any ideas?
-
Hi , I tried to create new company , i got error message like below" NO MATCHING RECORD FOUND "SEARCH FUNCTION CSHE- ODBC -2028" i AM USING SAP B1 2005B WITH PL40 REGARDS SRINIVAS