I updated the system and software final cut.

Hello friends
I updated the system and software final cut.
After the software update course and Motion me all the time after 6 seconds.
I did everything you could.
Until I got old program 10.4.1 and everything works.
What do I need to do.
Attached is the Mac specs
I also tried to Repair Permissions on your system drive and not solved the problem

I open the program within 6 seconds it crashes.
An hour ago I was still on the software without Updated with no problem.
Even Motion Course

Similar Messages

What are the system requirements for Final Cut Pro 7?

I can't find the system requirements for Final Cut Pro 7, I can find the system requirements for X, but like I said not 7.
I need to know the system requirements for Final Cut Pro 7, so I can buy the correct Macbook.
Is there anyway I can find out the system requirements.

Thanks
I'm somewhat inept about things like this, so I just want to make sure once more: This is in regards to Final Cut Pro 7?

Updated the system and now many buttons are not working

After updating the operating system to the osx 10.9.2 I have many problem with various buttons. The main switch doesn't work when I wanted to switch the mac off. On the keyboard I can't enlarge or reduce the window screen using two fingers and so on.

Try resetting the SMC. For a Retina or unibody model, follow the procedure for "a battery you should not replace yourself."
http://support.apple.com/kb/ht3964

Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422?

Hello:
Just today, I was working on a Mac system that does not have any of the applications that I would have expected to need to have installed in order to do more than just decompress movie files compressed with Apple ProRes 422.
I was expecting to have to install Final Cut Studio 3, Final Cut Pro X, Compressor 4, and/or QuickTime 7 with the QuickTime Pro key; however, none of those applications are installed and I am able to create custom QuickTime Apple Pro Res422 Sequences in Premiere Pro as well as export using Apple ProRes 422. After Effects and Adobe Media Encoder also show all the Apple ProRes variations.
Does CC 2014 eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422? Is it something happening on the OS or QuickTime level that would affect CC or CS6 in the same way?
I've done a web search, but haven't really come up with anything other than older articles about needing to have FCP installed (and I typically work on systems with Final Cut Studio 3 installed as well as CS6, CC, or CC 2014). If more detailed information is available, it would be great to be able to read up on it.
The system is a 21.5-inch iMac running Mac OS X 10.8.5, QuickTime Player 10.2, and Adobe Premiere Pro CC 2014 (8.0.0 - I know an update is available for PrPro, but it's not my system to make that change).
Thanks in advance,
Warren Heaton

Hi Emil:
I use ProRes all the time as well, but I have Final Cut Studio on my workstations.
I had not come across MindPower009's YouTube video. That explains how ProRes could be showing up without FCP or Compressor.
So, the answer to my question would be, "No, CC 2014 does not eliminate the need to have Final Cut Pro and/or Compressor installed to access Apple ProRes 422; however, if you are willing to be in violation Apple's terms of use, you can install the ProRes codecs anyway."
Even though MindPower009's YouTube video comments claim "FREE and LEGAL", it's clear from both the Apple download page and the ProRes codecs installer that Apple expects you to own at least one of their applications.
Thanks again for the link!
-Warren

While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?

While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?

This has happened to me with a few downloads without any upsets.
You should be OK.
As I recall the download is around 1.2 gig so it takes a bit of time and effort to get it to your system.
Al

Can I download and use final cut pro 7 on new mac pro tower?,or I must work with the new final cut pro x only?

can I download and use final cut pro 7 on new mac pro tower?,or I must work with the new final cut pro x only?

Disclaimer: This response assumes that a "new mac pro tower" is the new cylindrical model.
1. You cannot download Final Cut Pro 7. FCP7 is part of Final Cut Studio (2009) a.k.a "FCS3" and it was only released on a DVD set. It can still be purchased online (maybe even from Apple) for prices ranging from a few hundred to $1K and it is 5 years old and unsupported.
2. Although there are reports of systems running FCS3 on Mavericks, there are also a host of problems associated with this OS/software combination.
3. A new version of iMovie Pro Final Cut Pro X has been released which is reportedly very fast and is supported.
It's all a matter of what kind of movies you make...

Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to store update?

Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

HT202152 I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help

I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help.

For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
In Photos:
File ▹ Show Recently Deleted ▹ Delete All
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install the app in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
For ODS:
security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
For GP:
security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

HT1386 When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software.

When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software. I have tried to re-set up my phone but it makes no difference and deletes everything off my phone.

bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please.

Just updated the latest Epson software printer update from Apple. Now all my prints look solarized. How do I get rid of the new update and go back to the perfect prints I had before? Help please. Wasting ink and paper at the moment!!!!!!
I have tried the printer with my laptop (not updated) and everything is fine. It's just the beautiful 27" Imac that can no longer print.

Might be a corrupted printer preference file ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Preferences
Click Go
Move the com.apple.PrinterPrefs.plist file from the Preferences folder to the Trash.
Restart your Mac, restart the printer...

I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?

I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

I´m a frequent user of personalized tags on my contacts. When I update to iOS7.0.2, my tags don't appear on alphabetical order as they were on the other system. I already made a restoration of the system and it didn't work. Is there any way to fix them?

I´m a frequent user of personalized tags on my contacts. When I update to iOS7.0.2, my tags don’t appear on alphabetical order as they were on the other system. I already made a restoration of the system and it didn’t work. Is there any way to fix them?

I´m taking about the "CUSTOM LABELS"

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

I updated the system to OS X Mavericks and now I cannot open iPhoto with all my pics in. I trying to update iPhoto and this note appears: "Update unavailable with this Apple ID"

iMac OS X 10.9.4
3.06 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
I updated the system to OS X Mavericks and now I cannot open iPhoto with all my pics in.
I trying to update iPhoto 9.5.1 and this note appears:

Make sure you're logged in to the App Store with the same Apple ID that you used to download and install Mavericks. If necessary, log out of the App Store and log back in.
If that fails contact the App Store support personnel via the link circled in this screenshot:

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one to no avail.

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!

I'm a little confused by this?
Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder.

I updated the system and software final cut.

Similar Messages

Maybe you are looking for