I updated to 5.1 and now its stuck on "connect to iTunes screen" do anybody know how to fix issue?
I got a messgae on my screen about the 5.1 update on my iPhone 4 so I clicked update. My device turned off then the apple screen popped up and it began to perform the up date. after the loading bar was full it went to a connect to itunes screen so I did but nothing happened and iTunes will not recognize my device. I have uninstalled iTunes and reinstalled it. I also held the home/sleep button while holding menu button. Can someone please help me???????/////
Similar problem here. I have the 4s model and I try to do the update but when it downloaded the update it said that a problem occurred and then switched to the connect-to-iTunes screen.
Any ideas?
Similar Messages
-
Trying to set up my old iphone 3g for dad i went to update it and then it said it needed recovering so i did now its saying recover cant be made and everytime i turn it on its stuck on connect to itunes screen bought the phone a while back can someone please help.
does it give you a error message or just puts you through a loop
-
i've factory rested my phone and now its showing to connect to itunes after connecting it is downloading software
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
I updated my Apple TV and now it will not connect to iTunes but it will connect and play Netflix. I have restarted Apple TV and checked wifi connection.
1. First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
2. If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings).You should also try restarting your router.
3. If both of the above don't help, you should try a restore (Settings > General > Reset > Restore). -
I have tried to update my phone and it is stuck on "connect to iTunes" I have plugged it up to the wall charger because i have read that the new update can cause a battery drain and i have tried to reset it. None of this is working. Please help.
Device not detected in iTunes for Windows
-
Some weeks ago, I installed OS X Yosemite, as shown on my App Store, that was a "System Update available for my IMac 2009". Followed all the steps, normally and installed it as I did many other times ago (with the Maverick, Mountain Lion, OS X).
Just after the installation, I noticed that every single folder or program that depends on "Apple", stopped working.
Examples: Office package opens normally, so as Firefox. But, IPhoto, ITunes, Safari and App Store itself do not.
That is causing me fear, because even trying to reinstall Yosemite or return to the one I had before, using App Store became impossible. Even the "Apple Icon" on the top left corner does not work. I click, it flashes, just IF it was ready to open, but nothing happens, seams that have something stopping the "loading process" of the softwares.
Does anybody know how to fix the problem, please?
Thanks in advance. Regards.Thanks for your attention.
I Tried before, but the Mac App Store was not responding either, and worse, after 5 years, There is no free phone support
I ended up solving it by reinstaling the Yosemite pressing "comand + R"
thanks anyway
Regards -
When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?
Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
Choose System Preferences from the Apple Menu
Choose Sound
In the output tab you should now be able to make the HDMI "Sticky"
Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI -
i tried to update my software to 10.9 and forgot i had a disc of pictues in the computer. i stopped the istall as it was trying to go onto the disc of pictures. now its stuck on the os x page and i cant get it to my home screen. can anyone help?
I'm not really sure what you mean by "the os x page". It sounds like the installation did not complete.
I would try this:
hold down the power button until the computer shuts down
take out the disk with the pictures!
restart and see if it will boot up
if it boots up normally, I'd probably try to repair your HD: Boot into your recovery partition (hold down ⌘R at restart until you see the Apple symbol), go to Disk Utility, and repair your hard drive. While you're there, repair permissions too. OSX Tips Using the Recovery HD
Then I'd try to reboot and run the installer again. I think it's a good idea to do the installation in safe mode : Mac OS X: What is Safe Boot, Safe Mode? .
if it won't boot up normally, I'd try booting from the recovery partition and repairing your HD.
if it won't boot into the recovery partition, your options are:
Try to repair your hard drive with internet recovery: OS X: About OS X Recovery
If you have access to another (working) Mac and a USB thumb drive, download Recovery Disk Assistant, which you can use to repair your hard drive or reinstall OSX: OS X: About Recovery Disk Assistant
Try to boot into single user mode and repair your hard drive: Repair Your Hard Disk in Single User Mode | Everything Macintosh -
i updated my i pad with ease then updated my i phone and now apple does not recognise the i phone and then says there is no sim in the phone when there is one installed, can anyone help
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
IPhone4S: tried to update to iOS6 and now will only show "connect to iTunes" screen
I've got an iPhone4S and tried to update to iOS6 via iTunes. While installing, a message came up on my computer saying that "iOS6 could not be installed due to an unknown reason" (I'm paraphrasing b/c I didn't write it down, figuring that I could just re-do it). Ever since that message came up, neither iTunes or my computer recognizes that the phone is plugged in. Also the phone sceen is stuck on the "connect to iTunes" screen, which displays the USB cable with an arrow pointing to an iTunes logo. I've done the 10 seconds reset, updated iTunes, etc., and everything else that the iPhone troubleshooting suggests. Nothing is working, and my phone is totally un-usable. PLEASE HELP!!! Thanks!
1)I tried tinyumbrella. But it stills stucks in Recorvery Loop.
2)Tried also using DFU mode buty tinyumbrella isn't detecting the device in DFU mode.
3)I also tried iRecovery and results are same.
4)Is there anyother way to break the recovery loop as i don't have any backup for my device. -
Tried to update my iphone 4. Now im stuck in connect to itunes logo screen. Why is this happening?
i tried to update my iphone 4. Its now stuck on connect to itunes logo screen. itunes on my computer will not even detect my phone. Why is this happening and will it restore on its own? if not how can i restore it myself?
UNABLE TO RESTORE (connect to iTunes with cable logo)
If you are trying to restore and you device shows an image of a USB cable and connect to iTunes then carefully follow the steps in this article. You may need to do is several times http://support.apple.com/kb/ht1808 -
HT201210 updated my iphone now its stuck on connect to itunes
i tried to update my phone to the latest software and on completion it has went into recovery mode i think its jus showing that i have to connect to itunes! nothing happens when i do connect to itunes. its not even letting me make emergency calls it only stays on that screen! Any suggestions on how i can fix this???
Hey its me... I uh.. had to give in. I went to the apple service station n they checked it out, its a hardware error. Confirmed. Apparently, iPhone 5 production has had this issue for a while now, which means there are a lotta phones with this hardware error out in the market. So, they are gettin it replaced for a new one. I shud be gettin it in a couple o days now! Jus wanted to let evryone knw that the only way arnd this issue is gettin it replaced, so if anyone's facing the same issue, stop tryin to restore - wont work. Jus get it replaced!!!
-
im trying to buy some gems on clash of clans i did it befor but now its telling me that it can not conect to itunes store how do i fix it
Hello turtlePimp,
The following article provides useful information and troubleshooting steps that can help restore your iPhone's connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen -
I recently got a message saying I could update my Itunes so I did, but now none of my devices show up when i hook them up, can anybody help me with this problem?
Hi cwarren90!
I have an article here for you that will help you troubleshoot this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Hi, reset my
Apple considers jailbreak a violation of terms of use. Doing it voids your warranty with Apple and you give up your right to support from this forum.
Maybe you are looking for
-
Choosing the Right Power Supply
First things first. If you've got a poor-quality and/or faulty power supply, nothing else you do will work to solve your problems. Stick to the basics before you go further...The short answer is to buy a hi-powered, brand name supply, like the new EN
-
Help picking out a new video camcorder...what format do I use?
Help! I want to purchase a new HD video camcorder. I want a good unit with a limit being close to the $1,000 range. I will make some short movies and am struggling with what to purchase. I use FCE 4.01 for most of my editing, and sometimes I will use
-
Materialized view process running constantly /* MV_REFRESH (DEL) */
Hello, 3 days ago I created this Materialized view: CREATE MATERIALIZED VIEW src_mv nologging compress partition by range (dato) partition src_mv_pre2005 values less than (to_date('2005-01-01','yyyy-mm-dd')) , partition src_mv_2005 values less than (
-
I created a website for my client and it takes forever to load, how can i fix this issue? Ps. Let me know if you would like to know the web address, I will not post it in this forum to keep things professional, but I can email it to you if you send m
-
Hi all, Our UCCX is a 8.0.2 version .After a power failure our ups didnt react as expected and our uccx had a cold shutdown. Turning it back on some agents couldnt login getting an error message "Agent login is invalid". Checking the resource list we