I updated to iphoto 11 from iphoto 9. When i open iPhoto I can't see the photos, I see the same photo covering all the photos
I cannot open iphoto 11 and see my pictures properly now that I have updated from iphoto 9. When i look at my pictures all i see is the same picture covering / hiding the picture that should be there. but when I click on it i see the proper picture. I am not sure how to fix iphoto to open and load my photos properly since the upgrade
post your question in the iPhoto forum.
Similar Messages
-
when I open iphoto the following message appears 'Your photo library is either in use by another application or has become unreadable'
Reboot you system, if you have not already done so - this should take care of the "in use by another application" part of the message.
If the problem persist you will need to create a new library or to repair your library, or to restore it from your backup.
If you do not yet have any images in your iPhoto Library simply move it to the Trash and hold down the option-key while launching iPhoto again. This will give you the option to create a new iPhoto Library or to pick another one, if you have other libraries.
To fix your current library, or to restore it from backup, if you already have pictures inside that you need to save, see Terence Devlin's posts here:
Re: Why do I keep getting asked to repair my iPhoto library?
Re: when I open iphoto I get an error message that says Your photo library is either in use by another application or has become unreadable,
Regards
Léonie -
How do I stop my iPhoto from "quitting unexpectedly" when I try to import photos?
How do I stop my iPhoto from "quitting unexpectedly" when I try to import photos?
Whenever I try to import photos to iPhoto or even just edit photos on iPhoto, iPhoto quits unexpectedly.
When I import a photo, before it is finished, iPhoto closes, and a message comes that says "iPhoto quit unexpectedly"
What should I do? How can I import my photos now? Please help!I have found if you iTunes open while importing photos to iPhoto it will quit unexpectedly - try closing iTunes. Also, try selecting and importing 100 or fewer photos per import...seems like it quits more often when trying to transfer large quantities (like over 200 photos).
I wish Apple would update iPhoto with the same auto-sync feature in iTunes so I could sync photo libraries between computers without trying to figure out which ones are new (although as of this posting the other option is purchasing a 3d party photo sync program). -
When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!
hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
I'm a new Mac user. I imported photos from my PC through a jump drive and they ended up in my iphoto library on the hard drive but when I open iphoto from the dock its empty. How do I import those photos to the dock file from the iphoto library?
Paragon Software has the most reliable NTFS driver for Mac
tips on importing and organizing, transferring from Windows etc
http://www.apple.com/support/itunes
http://www.ilounge.com -
Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit. Now it just won't open. When I click on the iphoto icon in the dock, nothing happens! Does anyone have a solution to this problem please?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
when I open iphoto I get an error message that says Your photo library is either in use by another application or has become unreadable, I have tried restarting computer and opening iphoto whilst holding down option and command key, but then I get the following message-Your photo library is damaged or unreadable and cannot be opened. Please restore from a backup. Please can anyone help?
Make a back up now. If you have any vaule in Your photos always have a back up.
Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
In Library Manager the Rebuild command is under the File menu. There's also an excellent Help available.
Regards
TD -
Why just blank squares when I open iphoto?
I'm running version 4.0.3. Have 2500 photos and numerous albums. When I open iphoto all I get is empty squares with the photo number beneath. I loaded two photos from a camera card and they are just fine. I tried the iphoto "rebuild the photo data base" by loading with the option and shift key pressed, but after waiting about an hour for the process to proceed, when the photo library finally came on it was still blank squares. I haven't touched the photo library folder, but now seem to have two of them. I have an external hard drive, when I tried to load from the backup version it did the same thing. What's wrong? Help!
eMac Mac OS X (10.3.9) iphoto version 4.0.3walter7
Welcome to Discussions.
Don't panic. When you did the rebuild iPhoto created a new iPhoto Library Folder, probably called iPhoto Library_1. You can move the newest one to the desktop. Leave the original where it is.
Most likely because of updates or installs you need to:
1. Restart your computer to repair the directory if needed.
2. Run "Repair Permissions" from Disk Utility located in your Applications>Utilties Folder.
Open the first aid window and select your internal hard drive: "Macintosh HD" - Repair Permissions
3. Try iPhoto again. If it doesn't work then QUIT iPhoto.
4. Your iPhoto preferences file may be corrupted.
(MAKE SURE you QUIT iPhoto first)
You will find it in your Home directory:
(Home/your account) >Library>Preferences>com.apple.iPhoto.plist
Remove or trash the preference (.plist file) and restart iPhoto.
If all this doesn't help you may be running into the hard drive free space issue. The OS needs a lot of free space on your disk to use temporarily for heavy lifting - like working with iPhoto.
How much space do you have? -
I tried to move my images (over 25,000) to an External Hard drive to open up some memory, hoping to make my computer run faster. It took three hours to move the images and I see them all in the mac's menus. However when I try to open them with iPhoto now, none appeared. and when I tried to import them back to the main HD they come in to iPhoto just fine, but not with the albums nor any of the massive organization i'd created in the original. this represents years of images, and I can't imagine that I'd have to recopy them into folders/albums again.
Terrance Devlin answered a similar question back in April of last year. He said to make sure the ExHD is formatted to MAC OS Extended (Journaled) and to move the library to the ExHD and then open iPhoto with the option button and select "Choose Library" from the resulting menu.
Command "I" tells me that the new drive is formatted correctly. I can't locate the "Choose Library" when I open iPhoto with the opt button.
First, I wondered if the application needs to be on the same drive as the Library. I sure would like to know if I can find out how to restore all the folders I had them in. Terrance's advice helped the user that had asked the question.
Here's the url for that archived discussion: https://discussions.apple.com/thread/3849933?start=0&tstart=0
Can anyone help? I'm using iPhoto 5. My MAC is an OS X version 10.4.11.
thanks, brokenlomHere are Apple's instructions:
If you are using iPhoto ’06 or earlier, you will need to follow these steps to tell iPhoto where the Library is now located:
Hold down the Option key on the keyboard and open iPhoto. Keep the Option key held down until you are prompted to create or choose an iPhoto Library.
Click Choose Library.
Locate and select the iPhoto Library in its new location.
(from http://support.apple.com/kb/HT1229 )
Below (in the link below) is what you should see when holding down the option key and opening iPhoto. Keep holding down the option key until this dialogue comes up. You want to select the Choose Library button.
http://appleclinic.wordpress.com/2008/04/06/change-default-dir-iphoto/ -
I am using iPhoto '08 and moved my library to my external hard drive exactly as all the instructions online explained how to do. I renamed the original "iPhoto Library.old" and ,y external hard drive shows a iPhoto library using the same amount of memory as what it shows on my internal hard drive. Here is where is becomes a problem. When I hold the option key and open iPhoto, the only box that comes up does not give me a list of libraries to choose from. It give me the option to "Create new library" or "choose existing library". When I click "choose existing library" I can find the copied library on my external hard drive but when I open it, iPhoto shows No Photos. When I have tried opening the original iPhoto Library (the exact same way using the option key and choosing library) that I have not done anything to, except rename it, it does the exact same thing: No Photos. Both my internal and external hard drives show about 137 GB of space being taken up by photos but I can't access them. My other big problem is that ,y internal hard drive is completely full, which is why I am trying to transfer them to an external, to free up space so I am very limited on what I can do because I have no free space. Also, when I open iPhoto and try to go to the Preferences to change to path under advanced settings, it freezes and I have to force close it.
Ay advice would be greatly appreciated as I am getting stressed out that I can't open my thousands of photos!My guess is that the library has been corrupted from being run on an overfull HD.
So, try rebuild the Library on the External
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please help me?
Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed -
When I open iPhoto it asks me to choose a photo library. I already have a libary with photos and events in it that I've been using for 2 years. Where did it go? What happened to all my photos
We have no way of knowing what goes on on your machine. All we can tell is that your iPhoto library is missing and iPhoto can't find it. If you can't find then I the only thing you can do is restore from your Back Up.
Regards
TD -
i buy apple mac book on 12.04.2012, mac osx 10.7.2, 500gb hdd,4gb ram, i installed ilife '11 in it, after installing ilife '11 when i opened iPhoto its display a message"You can’t open your current photo library using this version of iPhoto,You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library? but option coming only quit, when i check for software update it shows ur software is up to date, waht can i do sir, how can i use my iphoto???
Make sure you are updated to the latest version - 9.2.1
LN -
Can't see all my photos when I open iphoto
I just downloaded a bunch of pictures to iphoto, but I cannot see them when I start iphoto. I know they are in iphoto b/c I can find them when I go to the pictures/iphoto folder in the HD, but they just don't appear anywhere when I open iphoto. Any suggestions?
thanks.After the import, were you ever able to see those photos from inside iPhoto? Did the app crash during or after the import?
Some ways to look for them:
Click "Last Roll" in the Source Pane (left column). You should see the photos from the most recent import.
Each import creates a Film Roll. Select "Library" from the Source Pane, turn on "Film Rolls" in the View menu, and look for the roll that was imported on the date in question. The film roll will have the same name as the folder which contains these photos inside the iPhoto Library folder, which is what you were looking at when you located your pictures in the Finder.
When you found those files using the Finder, did you change anything inside the iPhoto Library folder? If you renamed the folder there, it would cause iPhoto to lose track of the photo's location. If you did make changes inside that folder, you'll have to change it back to the way it was.
Regards. -
When I open iphoto says I have 4500 pics I haven 't downloaded that many. When I looked I have pic of ebay home page facebook a lot of different web sites I've visited How do I stop this and why is this happening.
This happens when someone drags the HD or a system folder icon to the iPhoto Window by accident. Solution: restore from back up created before this occurred.
Regards
TD
Maybe you are looking for
-
How can I put two photos in one 6x4 print??
Hello!! So I want to print out some of my photos for a scrapbook. I however do not want them all to be 6x4 sized prints and making smaller ones (scrapbook prints) at the photo shops cost too much. There HAS to be a way to just put two separate photos
-
Notebook Paper filter or Plug in for Final Cut Pro
I was wondering if there are any plugins or filters for FCP that is a full page of looseleaf paper? I need it for a school project. Thanks in advance
-
Have to sign in all the time wont stay signed in for two weeks as selected
when i go to e-print center I have to sign in even tho i have selected keep me signed in for two weeks This question was solved. View Solution.
-
Changing host name of server running SpiceWorks
I installed SpiceWorks Help Desk for a customer as a test for him to see if it would meet his needs. I installed it onto a server that was due to be commissioned for something else, and has been named accordingly. In DNS, I created a CNAME of helpdes
-
Deleting a Planned Independent Requirements
Hi, How can find who has deleted the PIR detail? Is there any table related to it? Thanks Srini