I upgrade my ipad to ios 5 and some of my aps are not working

I upgrade my ipad to ios 5 and some of my aps are not working ?

Some of your Apps may not be compatible with IOS5.1
Wait for updates.

Similar Messages

  • Updated my IOS 7 now some of my games are not work, how can I fix this problem?

    I have updated my Ipad to the IOS 7 and now some of my games/apps are not working, how can i fix this or revert back to what I had before?

    I'm afraid you'll have to wait until both Apple and the makers of your games/apps upgrade to new versions.
    Apparently there are still some issues with iOS7 that are being dealt with and the same with some apps.
    As for going back, I don't think you will be able to get this information from these forums...

  • TS3048 I am usng a bluetooth keyboard with my Mac and some of the keys are not working.  They are the numbers 1 through  9.  I have gone through the troubleshooting for mouse and keyboard and everything looks good. How can I get them to work again?

    Hi,  I am using a Mac computer that my husband set up.  I have worked on it recently with no problems.  Today, I am having problems with the bluetooth keyboard not  working properly.  The numbers 1 through 9 do not work.  I have gone through troubleshooting wireless mouse and keyboard issues and everything looks good.  Except, when I check the keys on the keyboard viewer, these keys still do not work.  The webpage guides me through and at this point I do not know what to do next, because the keyboard is still not working properly.  I sure hope there are some experienced people in the community to help me.  What should I do?

    Hi:
    I wish my suggestion had gotten you further.
    I do suggest you try to connect the keyboard again.  The request for a number is a step in it trying to pair.  If it gets by the number, it sometimes takes a little while to get connected.  If you are unable to get it connected and want a new one, I have been using Apple Bluetooth keyboards for years - and I like them. The one I have (the newest model) only uses two batteries and is very thin. 
    Speaking of batteries, if you are not already doing so, you might consider rechargeables.  I have a drawer full of them and use a 15 minute charger.  I go tired of buying batteries and rechargeables are environmentally friendly to boot. At the moment, I use 2450 mAh Energizers and a 15 minute Energizer charger (all purchased new on eBay at a very reasonable price).
    I am far from an iPad "expert," although I have one.  If my suggestion below does not help, post your question in a separate thread in the iPad forum.
    I had a terrible time syncing my iCal on my Mac with my iPad iCal (confusing - hopefully it makes sense).  I quit using iCloud as that added to the confusion. There is a facility to one-time sync items.  When you connect your computer to your iPad, iTunes opens.  The system begins a process (automatic backup and so on). After it finishes, you can click on "info."  At the bottom of the screen, there is an advanced section.  You can select any of the items and then force it to sync. The iCal information from your computer would be deposited on the iPad. 
    After all that, I do not use a Google calendar so the information may be worthless to you.
    If you want to reset the iPad to factory settings, you can do that when it is connected to iTunes (one of the options).  Me being me, I try never to erase anything. 
    Barry
    Message was edited by: Barry Hemphill

  • I have just upgraded my Ipad to IOS 5 and I am unable to use my applications

    I have just upgraded my Ipad to IOS 5 and I am unable to use my applications.
    The applications appear in the screen, but when I tap on any one of them, they do not open.
    Can some one tell me what to do to be able to use my application again?

    Sorry, I'm reposting this because of spelling error in my previous post (I must turn that 'auto-correct' off).
    Since I posted my questions, the only thing I figured out was to turn the 'iCloud' in the Settings on and now the plus sign is on and all my previous appointments appeared.  While this is a solution, what if I don't want to use iCloud? But I'm happy for now that my Calendar works.

  • HT4623 I upgraded my ipad to ios 7 and it's one requesting a passcode  have no idea what it is because I never had a passcode. Tried to connect to iTunes on my mac but still won't work

    I upgraded my ipad to ios 7 and now it's asking for a passcode. Have no idea what to enter because I never needed a passcode. Connected it to iTunes on my mac but still doesn't work

    Hi Lmprettyman,
    Thanks for visiting Apple Support Communities.
    This article has more information on passcode lock and how to return your iPod to working order:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    All the best,
    Jeremy

  • I upgrade my ipad with iOS 6 and i don't have siri, why?

    I upgrade my ipad with iOS 6 and i don't have siri, why?

    Siri isn't available for the iPad 2.
    Hope that helps!

  • HT5594 I upgraded to iOS 7 and my location service button does not work.  How can I turn it back on?

    I upgraded to iOS 7 and my location service button does not work.  How can I turn it back on?

    Settings>General>Restrictions>Privacy>Location Services. Have you restricted it?

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error

    Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error, what can i do???

    Assign an email address (gmail.com?)
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • The g, h and backspace on my keyboard are not working even after replacing with a new one.

    The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
    ...am waiting for a QIUCK RESPONSE

    How does a usb keyboard attached externally work?
    You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too. 

  • (fn+F2 and fn+F3) for brightness are not working

    (fn+F2 and fn+F3) for brightness are not working, while the other function working properly... help me plz
    DJanoon

    What is the product number?
    Did anything change before this started happening?
    Power the system on and press F10 about once a second to get into BIOS.  Once you are in BIOS, go to the configuration tab (typically next to last tab) and set Action Keys to enabled.  Save the changes, exit, and the system should reboot automatically.  Test the brightness keys wihtout pressing the Fn key.  I suspect they will not work in this state, but I want to rule out the possibilities while awaiting the product number.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HT4059 I bought an ibook and some of the pages are not visible because of encoding errors.  What does this mean?

    I bought an ibook and some of the pages are not visible and show and error message that there is an encoding error.  Can you help?

    There are numerous thread about the same matter in this forum
    I hope you'll find your answer
    https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=the+format+is+not+valid&containerType=14&container=2084&username=&rank By=relevance&numResults=15

  • HT201441 this is bullshite again, i just updated the phone my partner gave me and now is locked and he doesn't remember ever using icloud and all my icloud accounts are not working, *** what's this now Apple ? good idea to secure us but seriously many wil

    this is bullshite again, i just updated the phone my partner gave me and now is locked and he doesn't remember ever using icloud and all my icloud accounts are not working, *** what's this now Apple ? good idea to secure us but seriously many will have t

    If your device is disabled...
    Connect to your computer in recovery mode per the instructions in http://support.apple.com/kb/HT1212
    You may need to do this more than once.

  • I am using OS X and some of my customers are not getting attachments sent with Apple mail. This is very frustrating. Someone please help.

    I am using OS X and some of my customers are not getting attachments sent with Apple mail. This is very frustrating. Someone please help.

    Run the 10.5.8 Combi Updater again, then reboot your Mac.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

  • My ipad updated to IOS 7 today and now some of my apps are not working properly

    I updated my ipad to IOS7 and now some of my apps are not functioning correctly.  Is there anyway to revert back to previous software?

    I assume that you are familiar with your iPad's portrait orientation lock feature and you have verified your iPhone is not locked in this manner.
    In case you're not familiar, please make sure this icon does not appear on your iPad's status bar:
    If your iPad is not in portrait orientation lock, then the app developer should be prodded into updating their app to fix this defect.  Generally speaking, the App Store indicates a way to contact the developer to inform them of such defects.

Maybe you are looking for

  • Problem while trying logic express

    I have to decide if I prefer logic to dp5, so i got logic express trial and it seems pretty friendly but !! I got an error message: error while syncronizing with midi. and also logic xpress rarely reconized or load audiocore properly. Dp5 ? works ok

  • How to set visible property to href link

    Hi All, I want to open the new jsp page in the new tab when will we click on the link in my ADF application.So i tried like this. <af:column id="pt_c115" > <a id="JspLink" href="AuditLogInfo.jspx" target="_blank">JspLink</a> </af:column> Im able to v

  • Two issues about macbook display

    i have 2 questions for everyone of you... just to know the situation 1) does your display have, in the bottom horizontal line, a stripe more white than the rest? 2) does your display have darker corners? please add if your macbook is CD or C2D, and i

  • Dreamweaver CS3 problems...

    Hi i need some help, I have just started using Dreamweaver and it works fine! But it stops working when i try and edit my websites main pages such as Index.html. And no they arent corrupt or anything because i tryed the remote files aswell and it was

  • Won't remember ONE password

    Firefox remembers almost all passwords but ONE only it refuses to remember or rather does not give me the option of remembering. It is for a gmail account and should not give a problem. The only possible reason that I can think of is that I put in th