I upgraded to yosemite and iOS 8 in order to record with quicktime. But when I select Record a new movies I immediately get an Operation Could not be completed error.

I upgraded to yosemite and iOS 8 in order to record with quicktime. But when I select Record a new movies I immediately get an Operation Could not be completed error. When I choose record audio or screenshots, I get a little further, but as soon as I select my ipad as the source I get the same error message.

You don't need to be a developer for this to work. I get the same error. Just one more thing on the list that make me upset more and more with Apple. Things just don't work out of the box like they used to.
This new feature was to be included with iOS 8 and Yosemite.

Similar Messages

  • HT201272 Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error... I have tried all possible solutions i found on internet...my restrinction

    Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error...
    I have tried all possible solutions i found on internet...my restrinctions are disabled...tried reinstaling, relogging, restarting phone.. nothing seems to help...
    normally i would contact custommer support but i m using US account and i m not from US. anyway my US account is charged with money and it workes perfectly for all my other friends using this method ( we got some free US vouchers so we needed US accounts)
    Any advice?
    thanks in advance

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • Launch PB in CS5 and get "The operation could not be completed."

    I had been using the PB plug-in previously and it worked fine.  Since that time, I have installed no new hardware or drivers but have installed Topaz Adjust 4 filter.  Now, when I have an image opened in PS CS5 and I click Filters -> Pixel Bender -> Pixel Bender Gallery... I get a modal dialog with the title Error and the message "The operation could not be completed."  I tried reinstalling the extension and no luck.
    Here's some relevant info:
    Adobe Photoshop Version: 12.0.1 (12.0.1x20100625 [20100625.r.1146 2010/06/25:17:40:00 cutoff; r branch]) x32
    Operating System: Windows XP 32-bit
    Version: 5.1 Service Pack 3
    System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2
    Physical processor count: 2
    Processor speed: 3073 MHz
    Built-in memory: 2045 MB
    Free memory: 360 MB
    Memory available to Photoshop: 1634 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1050, right: 1400
    Video Card Number: 1
    Video Card: NVIDIA GeForce FX Go5600 (Sony)
    Driver Version: 6.14.10.4690
    Driver Date: 20031106141200.000000-000
    Video Card Driver: nv4_disp.dll
    Video Mode: 1400 x 1050 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce FX Go5600 (Sony)
    Video Card Memory: 64 MB
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5\
    Temporary file path: C:\DOCUME~1\matt\LOCALS~1\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Startup, 73.2G, 12.2G free
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5\Plug-ins\
    Additional Plug-ins folder: not set
    ...snip...
    Installed plug-ins:
    ...snip...
       Pixel Bender Gallery 12.0
    ...snip...
       Topaz Adjust 4 10.0
    ...snip...
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
       Access CS Live
       CS Review
       CS News and Resources
    Installed TWAIN devices: NONE

    I take it you've rebooted your machine a few times since all this has happened? Something must have changed to cause this problem. You could try deleting the Photoshop preferences and the Pixel Bender plugin preferences. You doublechecked that you have the latest drivers from nVidia (and you did so by manually comparing the result provided on the nVidia driver page with the driver version found in the Display preferences? Are you running on a laptop? If so, who is the manufacturer?

  • When i try to make a iMovie project it will say operation could not be completed and no other info

    when i try to make a iMovie it will say operation could not be completed and no other info is available

    I saw someone else had this issue back in July, and the solution was to create a new event and then a new movie within that event.  I tried this and it did not work for me.

  • When restoring an iPhoto library I got an "unexpected error" message and the operation could not be completed. Is my best choice to try again?

    One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
    When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
    Any suggestions? Thank you in advance!

    I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
    Mount the TC sparsebundle and verify it using disk utility.
    A5 here. http://pondini.org/TM/Troubleshooting.html
    You might also like to load the widget in Time Machine so you get whatever the full error message is..
    I cannot find any reference to the error code you are getting..
    My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
    Use the manual methods pondini recommends.
    http://pondini.org/TM/FAQ.html
    Q16 17
    Use ethernet only. Turn off wireless so it does not enter the situation.

  • When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    Hi
    And without info - it's near to impossibly to help. Try my general troubleshooting note:
    Troubleshooting note
    When iMovie doesn't work as intended this can be due to a lot of reasons
    iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    Creating a new User-Account and log into this
    This forces iMovie to create all pref. and cache files new and error free
    Event or Project got corrupted - try to make a copy and repair
    a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
    version miss match of QuickTime Player / iMovie / iDVD
    preferences are wrong - Repair Preferences
    other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    USB-flash-memories - usually do not work
    Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
    iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
    This You do by
    First -  close iPhoto
    Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
    Thirdly - now select all five options presented
    THEN - WAIT a long long time (>20 hours are not strange)
    free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    Screen must be set to million-colors
    Third-party plug-ins doesn't work OK
    Run "Cache Out X", clear out all caches and restarts the Mac
    Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

  • I'm trying to clean up my mailbox and when I delete an item(s) I get a message that say's "operation could not be completed- file exists. Further, when I do this one message is copied (not deleted) to the trash folder. Can someone help me through this?

    I'm trying to clean my mailbox and when I click on delete or highlight and move to trash I get a message that says "operation could not be completed - file exists. Further, when I select a message or group of messages, one of them is copied (not deleted) to the trash folder. Can someone help me through this?
    Thanks.

    It's a POP account. I decided to clean up my mailbox today after noticing the computer was real slow after USA Today started sending their daily top stories with new graphics. Also before I noticed the problem with mail deletion - two things happened. 1) I updated security sofware as prompted by Apple and 2) downloaded Mackeeper and went throught some preliminary scans but did not buy their package. Thanks forn nstaying with me.

  • Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

    I did try in all of them and it doesnt work it apears like that........
    The share operation Master File has failed
    The operation could not be completed because an error occurred when creating frame 608 (error -1).
    and i dont know what to do plese hlp me....
    Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help 

    Double post…

  • TS3899 I have just set up my new iphone 5 from my 4.  My mail is not coming through and it keeps asking me for my Yahoo password which i am putting in and then it says operation could not be completed (MFMessgeErrorDomain error 1032) what does this mean

    Im having trouble setting up my mail.  I have just upgraded from a iphone 4 to 5.  mail keeps asking for my password when i put it in it comes up saying
    the operation could not be completed (MFMessageErrorDomain error 1032)
    what is this??

    Nice try! Take a hike.

  • PS CS5 Save for Web and Devices reports "The operation could not be completed"  ?

    I teach in a lab of 27 computers, 110 students and part of the curriculum is teaching students to "Save for Web and Devices" this year for some strange reason none of my students can access "Save for Web and Devices"  they get the error message "The operation could not be completed-A write permissions error has occured."
    It has stumped our district top network support guru.
    We are running PS CS5 12.0.4
    He tried this posted fix but it did not work
    http://involution.com/2010/06/13/adobe-photoshop-cs5-write-perimissions-error-on-snow-leop ard/
    It worked once last Friday but today it failed, I'm getting very nervous about being able to prepare my students for the ACA exam without this function.
    In a discussion forum they suggested "zipping and deleting" the save for web preferences, I tried that.  Shut down Photoshop reopened it and that did not work.
    I am at a loss.  Seems like a bug.
    Any ideas.
    We are using iMacs running  Mac OS X  10.5.8

    The error message may not simply address the location to where the students will save a single file. The error likely applies to the temporary location where the various optimized versions might be automatically saved as you preview the image as JPG/PNG/GIF. I would wager that you would not see this error when you are logged into one of the students' computers as an admin.

  • What does "The operation could not be completed because an error occurred when creating frame 0 (error -1)." mean, and why does it keep happening?

    So I've been trying to export a video file from Motion 5 (and FCPX), and I keep recieving the message "The operation could not be completed because an error occurred when creating frame 0 (error -1)". I've found the problem has something to do with a video file in the project, Ive tried multiple versions of said file, in multiple formats (.mov, h264, etc.), and I keep getting the same result.  The file was originaly a 640x480 wmv file. Any suggestions?

    I ended up figuring out a solution, but I'll get to that in a sec.
    To answer your question, I converted the .wmv file in a program called Media Converter (available in the App store), and converted it to an h.264 file (then later to a .mov file, and then to an .mpg). I could view the file, and work with it in projects, but any project I tried to output with any version of said file, would result in the afor mentioned message, with the same results in FCPX (and Compressor 4 as well).  I tried multiple frame rates, resolutions, files types, re-converting the file, all with no luck.  My impression from said experiments, and reading other discussions was that it was a corrupt file. 
    Then I got frisky...and a little desperate. I brought the converted file (the .wmv to .mov) into Motion 4... and an export worked first try.  So I exported a pro-res file from Motion 4, and used that file in the already built Motion 5 project, and voila! 
    So, who knows what that means in real terms, as for the whats and whys.

  • PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC

    Dear Adobe Community,
    I got my first imac a few days ago, and i decided to install Adobe CC.
    When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
    And I also have a problem with Premiere, when i want to export a project says that premiere must close.
    This is the try version, is this a problem of Adobe or Apple? i'm very worried
    Help!
    Thank you!
    Ivana

    Muchas gracias!!! Ha funcionado!
    El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
    Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
    created by Federico Platon in Foros de usuario a usuario - View the full discussion
    Confirma que se trata de una cuestión de permisos.
    Por cierto te aconsejos actualices la 9.1  a 9.2, posiblemente se habría arreglado así también.
    Bueno los pasos son:
    2. Select Go from the Finder Menu.
    3. Select Computer.
    4. Select Macintosh HD.
    5. Select Users.
    6. Select your user profile.
    7. Right click on user profile. Select Get Info.
    8. Go to bottom and unlock with admin password to make changes.
    9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
    10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
    Creo que no se necesita traducción.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Foros de usuario a usuario at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I updated my ipod the other day and since i have been unable to open any apps that connect to the internet, its says "operation could not be completed. invalid argument". anybody help please?

    i updated my ipod the other day and since i have been unable to open any apps that connect to the internet, its says "operation could not be completed. invalid argument". anybody help please?

    Have yu tried the standard fixes:
    - Reset the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    Restore the iPod via iTunes,  First from backup and if problems persist, restore to factory defaults/new iPod.

  • I am transmitting data over internet and WiFi ,it's working fine with internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi?  Please help me.

    I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi?     Please help me....
    Thanks in Advance.
    Neeraj@iDev

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • I can't find Citrix Receiver on App store and when I down load from Citrix; the site links to App Store and I get "Your request could not be completed" - how does one load with no issues? I have an Imac Intel on Mac OS X 10.6

    How do I load Citrix Receiver on my iMac? App Store search came up with zip. Tried from Citrix website, it tried to hook up with App Store snd I got this message: "your request could not be completed". Any ideas?

    I see the same dialog and definitely can't locate the app on the App Store.
    Try their support page > http://www.citrix.com/support

Maybe you are looking for