I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

Similar Messages

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

After you change the account settings as I described below hold your finger on any app until they all wriggle, then tap the "-" on each purchased with her Apple ID. Press the HOME button when done. Then go to the App Store and buy or download the apps you want.

Can I boot in system 10.8 with a new mac Pro?

I am upgrading my computer to a new Mac Pro and have a software program (Extensis Portfolio) than won't run in anything past system 10.8. Can I create a partition or boot from an external drive with system 10.8?

I can point you to Mavericks running a Maverick VM for one. Are you sure you want to go with "ML Only?"
I doubt it changed since Maverick days.
Installing OS X 10.9 Mavericks as a guest operating system in VMware Fusion (2056603)
Apple's End User license agreement allows you to install up to two additional copies of Mac OS X 10.9 on a Mac that is already running a retail version of the operating system and not a pre-installed version. For a Mac shipped with OS X 10.9, refer to
Creating a new OS X virtual machine from the recovery partition in VMware Fusion 6.0 (2056798)
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=display KC&externalId=2056603
This was the kind of thing I like to see (and do):
Clone Host Machine & Run as Virtual Machine for Testing
http://jeffgardner.ca/Blog/?p=738
to move back a forth between the test systems and my production environment was a process I found too tedious â€“ requiring a reboot each time I needed to check things. Using two machines is minimally effective, since I canâ€™t afford two Mac Pros.
I decided to use CCCloner to clone my software environment and VM Fusion to simulate my hardware â€“ running this cloned environment as a Virtual Machine on the same hardware as my production environment. I basically see a copy of my machine as a window on my production hardware.
[Guide] Install OS X 10.9 Mavericks on VMware Workstation
http://www.sysprobs.com/guide-install-os-x-10-9-mavericks-on-vmware-workstation- with-windows-7-or-windows-8

Can video cards for the new Mac Pro be installed in the field?

Current Configuration of the new Mac Pro is as follows:
ACES MacPro Workstation Seat
Processor
6-Core/3.5GHz/Xeon E5
Memory
32 GB
Graphics
2X AMD FirePro D500
Hard Disk
1 TB
Display
24" LED / HP
Media Player
2GB FIPS USB Drive
Mouse
Apple Magic Mouse
Keyboard
USB
Ports
4-USB 3.0;
6-Thunderbolt
1- HDMI
Netwk Interface
Ethernet/802.11n
Card Reader
NIST SP 800 Compliant
My question is can the Graphic Display cards be removed and replaced in the field by an experience Mac Technician?
Any special tools required?

Now here is the back, showing the heatsink paste still in place, and the thermal pads used to cool the RAM chips to the central cooler:
note that the two cards are not interchangeable -- they have their power lugs on opposite sides. One card has chips to support actual display output to the thunderbolt Busses, the other card has none, but has the custom micro-PCIE slot for the PCIe SSD "stick".
One reason for this design is that to make a leap forward, you would have to water-cool the slots for a traditional form-factor PCIe slot Mac pro. Then do it again to include a second GPU. In my opinion, this model Mac Pro is about conquering the cooling problem of this much CPU and GPU compute-power in one box.
NVIDIA graphics card replacements? maybe eventually, but not at this writing.

How fast is the new Mac Pro 8 core comparred to Mac Pro 4 core?

Hi,
I consider to update my 1.5 year old Mac Pro 2.66 ghz (4 core) to a Mac Pro 8 core. I use this machine as the center in my studio running Logic 8. I use a lot of V.I. and plugs.
Can anyone tell me anything about the gain in performance that is possible upgrading to an 8 core?
Or show me where to find information. MacWorld use to be my resource in that kind of matters, but they never use Logic as a test program.
Thanks in advance!
Stigc56
Musicmind.dk

Glenn,
The new Mac Pro will be faster at everything when compared to your older PowerMac, but I think the first 2 items you list will be more dependent upon drive speed.
1. The FSB and memory are faster in the new Mac Pro, but reading from the CD will only be as fast as the optical drive can handle.
2. How fast the TIFF file is displayed in the Finder may be more dependent upon the read speed of the hard drive than the processing speed required to create the thumbnail view displayed by the Finder.
3. Working in CS3 should definitely be faster. Even though you didn't want a response that linked to a test, the following BareFeat test should show how much faster CS3 is on the new Mac Pro.
http://www.barefeats.com/harper.html
Keith

Can I use my old AIr Port Extreme with my new Mac Pro with Lion installed? It has worked well with the G-4 that I'm replacing.

Can I use my old Airport Exteme with my new Mac Pro with Lion installed? It has worked well for years with my G-4.

I'm smarter now. It worked fine.

My I pad 1 sometimes while watching working switches off and go back to home page ... Why ? Also I need to know how I can upload my photos and pictures from laptop to my I pad. I tried thru I tunes but not work.

My I pad 1 sometimes while watching working switches off and go back to home page ... Why ? Also I need to know how I can upload my photos and pictures from laptop to my I pad. I tried thru I tunes but not work.

Satmar wrote:
My I pad 1 sometimes while watching working switches off and go back to home page ...
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...
Satmar wrote:
Also I need to know how I can upload my photos and pictures from laptop to my I pad.
See Syncing photos to devices
Here > http://support.apple.com/kb/HT4236

I have bought a new Mac Book Pro, and I need to know how I can move Aperture from my old Mac Book to the new one..

I have bought a new Mac Book Pro, and I need to know how I can move Aperture from my old Mac Book to the new one..

It begins with: F-285-NER-151-QBQ-and continues with 5 more 3 or 4 letters/numbers..
Yes, that is the number. And what version of Aperture have you installed? The same version as on your old Mac?
But it don´t work on my new Mac...
In what way does it not work? Does it require you to enter a licence number for Aperture 2 as well? That will be necessary, if your serial number is an upgrade serial number. Then you will have to enter all previous numbers as well.
Or does Aperture not accept the number as correct? Then check the spelling; some letters are easily confused like "I" and "1" and "O" and "0". Do not use the number pad to enter the numbers.
See: Troubleshooting Professional Application Serial Numbers
Regards
Léonie

HT1766 Just purchased a new Ipad air and need to know how I can download the following apps free 1. Pages,2. Numbers,3 Keynote

Just purchased a new IPAD air and need to know how I can download rhe following free Apps 1. pages, 2 numbers, 3 keynote

Consult the following link if you are having problems:
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad

Good day I need to know how I can switch to the cisco phone wallpaper already loaded.

Good day I need to know how I can switch to the cisco phone wallpaper already loaded.
Without having to go to each phone.
I want it done from CUCM

Hi Adrian,
The most effective application for doing anything with Cisco Unified IP Phones (including updating/managing Phone backgrounds) is PhoneView from UnifiedFX (http://www.unifiedfx.com)
You can download for free and try it out, not only can you change background images in bulk with just a single mouse click, you can see the screen of multiple phones at once to confirm the correct image is displayed.
Kind Regards.
Stephen

I need to know how I can disable the automatic updates of Firefox, since I work in a company that is requiring this. Ideally, by group policy or some means to disable all network computers

I need to know how I can disable the automatic updates of Firefox, since I work in a company that is requiring this.
Ideally, by group policy or some means to disable all network computers

Some info here (group policy) --> http://www.unidesk.com/blog/how-disable-firefox-auto-updates<br />
Above article refers to --> http://sourceforge.net/projects/firefoxadm/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

How can I move my three SATA HDDs to the new Mac Pro without backing up?

Hello,
I am doing initial shopping for the new Mac Pro but have come to the frustrating realization that I cannot move my HDDs to the new computer for free. Sure, I can migrate my OS drive to the new one, but my other three disks inside my 2007 Mac Pro are in a pickle. I want an economically viable method of getting those three drives to the new Mac without backing them up, formatting or something like that. Also, I would prefer a transfer method that will rival the speed of it being internal. I don't think USB 3.0 can do this, but Thunderbolt 2 can? Everything I've seen online has been outrageiously expensive or requires me to reformat (RAID).
What I'm looking for:
Connect three or more HDDs of various capacities to new Mac Pro
Have the transfer speeds rival or exceed that of my current grandpa computer (Mac Pro 1,1)
Have it not be incredibly expensive (anything over $300 is ridiculous)
Have it be no more than two devices, one prefered unless they are individual enclosures that can either daisy chain and/or are inexpensive.
Safe for my drives.

> a 3 TB, a 1.5 TB and a 500 GB.
Most 3TB drives are going to be "green"
The 1.5TB may or may not
The 500GB is likely old, due for retirement if not worse.
A pair of two drives of 2TB likely would be enough for now and plenty of dual drive USB3 cases.
For a single drive and Thunderbolt docking adapter for using one drive at a time:
http://www.amazon.com/Seagate-Backup-Portable-Thunderbolt-Adapter/dp/B009HQCARY/
Under $300 case
http://eshop.macsales.com/item/OWC/METB7DK0GB/
Or this one is fine and USB3
http://www.amazon.com/StarTech-com-External-Enclosure-3-5-Inch-SAT3520U3SR/dp/B0 09C5VSFU/
NO backup? You DO have some backups I hope, or you are on thin ice or walking tight rope.
Some helpful guides on USB3 vs TB
http://www.macperformanceguide.com/topics/topic-USB3.html
http://www.macperformanceguide.com/index_topics.html#MacPro2013Transition
http://www.macperformanceguide.com/topics/topic-Thunderbolt.html
1TB WD Blue go for $60?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?

I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?

No. Target Display mode is only supported when connected to a Mac running 10.6 or later.
It cannot be used with a PC, bootcamp, gamaing console, cable box, DVR or PowerPC Mac.
http://support.apple.com/kb/ht3924

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

Similar Messages

Maybe you are looking for