I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?
I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?
for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone
Similar Messages
-
time capsule only allows 2 devices at a time as a router. If I am using the iphone and macbook pro, it bumps the roku offline. Any suggestions?
At a guess you have cable internet connection.. please confirm exactly what you have.. two public IPs are allowed by some ISP.. once you use up the two IPs, there are no more..
Make sure the TC is in router mode. And to get it working you probably need to shut off the cable modem.. if it has battery backup remove the battery.. try 5min off .. if not long enough try 20min off. then overnight. The ISP equipment must reset to allow a new MAC address to capture the IP.
If you cannot work it out.. plug in the old router again.. and set the TC to bridge mode.. which I suspect it is in now.. and plug it into the main router.. it should work fine like that. -
how do I get rid of the red and white compass rose used with the rotation tool...from the document? I am using a iMac and Macbook Pro OS Mavericks. CS6 no CC?
any help appreciated...thank you! VI don’t think you can.
-
AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I dot correct this?
Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186 -
hello everyone ,i have macbook and macbook pro 15,so my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.
mangesh171 wrote:
my question is can i use magsafe 60v charger to charge my macbook pro which having 85v magsafe but not in working condition.
No.
Power Adapter/ cord wattage
“Power adapters for Intel-based Apple notebooks are available in 45W, 60W, and 85W varieties. Although you should always use the proper wattage adapter for your Apple notebook, you can use an adapter of a higher wattage without issue.”
http://support.apple.com/kb/HT2346
Best. -
Connecting iMac and MacBook Pro using a non-Apple wireless router
I use a Belkin wireless router. Is there any way for me to connect iMac and MacBook Pro using the router to share files? I think I read somewhere that I need AirPort Extreme for this, but I'm not sure. Thank you.
Great resource from Dennis...file sharing, I.e. networking, is a function of the operating system settings and not the brand of router. Using Mac OS X 10.6 on both machines makes it really seamless. Following Dennis's kb article should make the two almost act like one machine.
-
Looking for a Dictation App for my Iphone and MacBook Pro.
Want to send all dictation to Word.
I have Dragon. Should I purchase Dragon Premium or Dragon for Mac?Care to share which OS you are using?
OS has its own dictation program.
Should I purchase Dragon Premium or Dragon for Mac?
Only you can make that determination. Read the system requirements for both and read the reviews. -
What setting will make sync make my iPhone and MacBook Pro contact cards alike?
What setting will make sync make my iPhone and MacBook Pro contact cards alike? I've been having to key in changes to both devices because sync doesn't sync.
If you really are running Mac OS X 10.7.5 and iOS 6.1.3, you should be able to sync through iTunes, but in current releases you need to use a central contact service like iCloud.
Did you have it working and then not working, or have you never had it working?
Are you trying to use iTunes, iCloud, or something else? -
I have my ipad, iphone, and macbook pro all synced together, which generally works fine. I receive all emails from senders in my address book in my Macbook Pro and iPhone, but some end up in Trash on my iPad, with the message, "This message cannot be displayed because of the way it is formatted. Ask the sender to send it again using a different format or email program. text/plain" They appear to be mainly from competing platforms, android, etc. Is there a workaround for this problem?
Thanks-POP: yahoo, aol, comcast/time warnder/road runner
Imap: google, hotmail, and more including icloud.
If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically Icloud or Hotmail would be my choices right now.
To find out more about what happens to you, search on Google "difference between pop and imap" -
IPhone and MacBook Pro but only have one Apple account
Brand new to the MacBook Pro world. First Apple laptop (or Apple computer at all for that matter) so of course I have some questions. I think I am correct in saying that basically each Apple device has to be separate and apart from another even if they reside in the same household. Meaning that each one has to be logged on to a separate and unique Apple account and email address for things like Facetime and iMessage to work properly. So, with that said......If I personally own the iPhone and MacBook Pro but only have one Apple account how can I make them both work separately and independent of each other??? The problem I've noticed is that Facetime and iMessage do not work and conflict with each of the two devices.
Hi BigDisMe,
Thanks for using Apple Support Communities.
Congratulations, and welcome to the Mac World. Actually, you can use an Apple ID, together with iCloud to make your devices work together. Both devices can be connected to the same Apple ID, and use Facetime, Messages, and email together.
As long as both of your devices are updated to the latest OS, OS X 10.9 Mavericks for your MacBook and iOS 7.0.4 for your iPhone, you can:
On Mac:
1. Open System Preferences-iCloud
2. There should be a button somewhere that says, "Add Account".
3. Use your Apple ID to log in.
4. Make sure to enable your Messages, Facetime, and email accounts.
5. There is no Step 5.
On iPhone:
1. Open Settings-iCloud.
2. There should be a button somewhere that says, "Add Account".
3. Use your Apple ID to log in.
4. Make sure to enable your Messages, Facetime, and email accounts.
5. There is no Step 5.
Good Luck,
-Marcus -
Can't synchronise mails of iphone and macbook pro
I receive my mails on my iphone and Macbook pro. If I download the mails on my iphone first and I open them, they will not be downloaded on my macbook pro. If I download them on my iphone but I don’t open them they will downloaded on my ibook pro. What do I have to change on my settings in order to have the syncronized?
ThanksThat's normal behavior for a POP3 email account. If your email provider supports IMAP, set the account up as an IMAP account on both the Mac and the iPhone. IMAP supports synchronization between clients and the server. POP3 does not.
-
I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing… Any suggestions? I have iTunes Match turned on and everything.
Thanks Terence! I can see iTunes library from neither iPhoto or iMovie . I'll check on iTunes forum.
-
I connected to home share on my ipad iphone and macbook pro now it's asking me to turn on home share on the apple tv but I have no other remote, any ideas?
Welcome to the Apple Community.
If home sharing isn't enabled on the Apple TV, you will need the aluminium remote that came with it to do so. -
I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
Thank youAssuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
Regarding FCE, there is no way to download & install the product. You need an original FCE install disk and your FCE serial number.
Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store. -
G'day. I am using iMovie 11 and need to clear disk space. How can I do that using an external drive, leaving me the option to go back and make changes or access old events or projects from that external drive?
The slightly bigger question is whether you want to move all movie content to the external drive (essentially meaning that drive will always need to be attached when you're working with your videos), or whether you just want to archive older videos off to the external drive.
If you want to move all videos, then just move the 'Movies' folder in your home directory to the external drive, then create an alias of the external 'Movies' back in to your home directory. Now the 'Movies' icon in your home directory will point to the external drive and everything will just work (as long as the external drive is attached when you launch iMovie)
If you want to archive older movies then each Movie should have its own subdirectory within your Movies folder. These can easily be moved off to the external drive, and moved back should you ever need to work on those movies again.
Maybe you are looking for
-
OVM 2.2.2 import VirtualBox OVA
[root@ovm]# cat /etc/ovs-release Oracle VM server release 2.2.2 Unpack OVA, [root@ovm]# file VB.ova VB.ova: POSIX tar archive [root@ovm]# tar tvf VB.ova -rw------- someone/someone 15691 2011-12-08 20:32:29 VB.ovf -rw------- someone/someone 2917182464
-
I don't see thumbnails for PDF files in my Windows Explorer
Hi, When browsing through my File Manager to look for files, I used to be able to see a thumbnail of any PDF files I'd saved. I can still see the old ones created earlier, but my more recent files just show a black square with the Adobe 'A' in bottom
-
Acrobat Pro 9 Used To Work on my 64bit Windows 7 machine
I recently replaced my 32bit XP platform which was running with Acrobat Pro 9 for a few years with a 64bit Windows 7 earlier this year. It worked just fine. For some reason, I am now finding that trying to 'actuate' the program fails. As does clickin
-
Upload the doc , pdf file presentation to application server
When upload file from presentaion to application server other then text file data is corruption in wed dynpro application using the UI element of UPLOAD. we used the code in custom application when we checked in T.Code : 'AL11'. only text file is sho
-
Using a global template including BC Sets
How do you embed a BC set in a global template for roll-out?