I use a PC for work and link it to Office 365. I also have an iphone and ipad. How do I synchronise these devices to Outlook without creating multiple copies of calendars?

I use my PC for work (MS Office and Outlook). I also use Office 365. I also have an iPhone and iPad. I'm having difficulty getting Outlook to synchronise with Apple devices. I keep getting multiple copies of calendars and not being able to see contacts. Is there a process anywhere which describes the best way to manage these devices together? Or should I just give up on the PC and buy a MacBook or Air.

Excellent. These guides got me as far as installing my preferred language pack, which gets added to the add-ons automatically (assuming the user says yes to the appearing question when Firefox is started).
However, the GUI does not change unless the user enters "about:config" and changes the locale.
Is there a way to do this from the command line? I mean, changing the locale settings.
And preferrably for all users. So even when new users get added and they start Firefox the first time, they see it appearing with the preferred locale and not in English.

Similar Messages

  • If I delete a contact in my iPhone will this contact be notified they have been deleted if they also have an iPhone and iPad?

    If I delete a contact in my iPhone will this contact be notified they have been deleted if they also have an iPhone and iPad?

    No worries, it will not broadcast your deletion at all.

  • I can't use my Ipad because a pop up is asking me for my Apple ID password but when I write it and press Ok the pop up message keeps appearing! It doesn't let me do anything on my Ipad. I also have an Iphone and it is not doing this.

    I cannot use my Ipad because Im getting a pop up asking for my Apple ID password but when I enter it the pop up just keeps coming back and doesn't go away. It pops up every second it doesn't let me do anything on my Ipad not even turn on WiFi! The account and pasword are correct in fact I can use them fine on my Iphone. I have tried restarting my Ipad and turning it of, it doesn't work! What is happening and what can I do to fix it?

    Same problem for me.
    1. Cannot connect to wifi as icloud password pop up keeps appearing.
    2. tried deleting account. UNable to do so.
    3. tried resetting password by logging into apple id through desktop as mentioned in one of the responses in another thread. Unfortunately the apple id to be reset is the same as being prompted by icloud and hence unable to reset the same.
    Feel like breaking the **** ipad into bits. Stupid of apple to let such a bug in and not offer support !!

  • I downloaded the iCloud into my PC (I also have an iPhone and an iPad), I can't sign in even though I am using the exact apple ID and PW as in purchasing from appstore etc. I live in Israel

    I am working fine with iCloud on my iPhone and iPad. I tried to sign in to iCloud app on my PC and it asks for my Apple ID. I use the same Apple ID I'm using for my iTunes and Appstore purchase. It keeps telling me that there's a server error. Might have something to do with the fact that I live in Israel? What is it?

    You must setup a new account on a Mac or an iDevice, then you can sign in from a PC. You cannot create a new iCloud account using Windows.

  • Can i sync my mac pro with my mac book?  i mainly want to do this for iTunes and iPhoto?  I also have an iPhone and an iPad.

    can i sync my mac pro with my mac book?  i mainly want to do this for iTunes and iPhoto?  I also have an iPad and an iPhone.

    Do you have a local network setup either wired or wireless? If so, then have both computers connected to the network. Enable File Sharing on both computers in Sharing preferences. Select the startup drive on each computer. Press COMMAND-I to open the Get Info window and check the box labeled, Shared Folder.
    You can now keep both computers in sync by using a third-party backup/sync utility that will work with a network setup such as:
    Data Backup
    Deja Vu
    Silver Keeper
    Retrospect
    Super Flexible File Synchronizer
    Synchronize Pro! X
    Synk Pro
    Synk Standard
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.

  • I'm using windows 7 and working in office 2010. I have installed iCloud and I can't print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.

    I’m using windows 7 and working in office 2010. I have installed iCloud and I can’t print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.
    Geoff

    I had a similiar problem, with my multiple devices.  I open iTunes and when all devices were connected I went to the info section on each device.  Under info I checked the sync calandars. Under that I click all calanders. I then did the apply in low right. I then did the sync function and it fixed it for me.  You have to do this for each device.
    I also checked the device (ipad,Iphone) themselves and change the calander selection to NO Catagory.  Hope this helps.

  • Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

    Is anyone else having email problems such as apps exiting in the middle of an email? It may be a wireless issue. I use First Class for work and yahoo email for personal. I will be in the middle of typing a long email and the app just quits, all data lost.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • I own CS 5Premium. Reading the FAQs, it seems I am eligible to upgrade to CS 6 but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month is too much for me -- I don't use this product for work. The $29 offer seems

    I own CS 5 Design Premium. Reading the FAQs, it seems I am eligible to upgrade to CS 6 but I can't find the upgrade to purchase and download. I can't upgrade to CC because $49 per month is too much for me -- I don't use this product for work. The $29 offer seems reasonable but $49 is way too much. I don't need the majority of the programs included in CC, but subscribing to just three of them will cost way more. Really not sure what to do here :-(

    Thanks Ned. I did find this page, however it isn't an upgrade. I have been purchasing Adobe products for years so that I could just pay the upgrade price for current products. With the current system, I would be paying much more than I would for an upgrade. For example, I have been using my version of CS for at least three years. The upgrade cost me $750 so that comes out to around $21 per month. I guess I have no options as far as upgrading except for paying for the overpriced CC. Oh well, time to start looking for alternatives. It was just so convenient to have the same programs at home that I use at work.

  • HT5621 Hi, we have three iPhones and iPods which are currently linked to one apple ID.  I have now set up an apple id for each phone/iPod.  How do I go about re-directing the two accounts to the relevant one that has now been set up please?

    Hi, we have three iPhones and iPods which are currently linked to one apple ID.  I have now set up an apple id for each phone/iPod.  How do I go about re-directing the two accounts to the relevant one that has now been set up please?  I could do with a step by step guide to follow as am worried about loosing aps, music, photo's etc which are on the individual phones.
    Thanks
    Mandi

    On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
    This will have no affect on the ID you share for iTunes content, & you can continue to do so.

  • Use custom field for work phone number in CUCiLync

    Hi,
    I have searched and tried out all sorts of different settings for enabling/changing the way CUCiLync searches the Active Directory (AD) for contact phone numbers.
    But no matter what setting I use in the HKEY_CURRENT_USER\Software\Cisco Systems, inc.\ Client Services Framework\AdminData and/or HKEY_CURRENT_USER\Software\Cisco Systems, inc.\ Client Services Framework\Active Directory hive, CUCiLync still uses the default for Work phone number. The default for this is to use telephoneNumber, the value that I wish to use is the ipPhone field.
    The registry values that I have tested so far are these.
    HKEY_CURRENT_USER\Software\Cisco Systems, inc.\ Client Services Framework\AdminData
    LDAP_AttributeName_businessPhone
    LDAP_AttributeName_primaryPhoneNumberForSearches
    LDAP_AttributeName_otherPhone
    All set to ipPhone, and I have also tested to set it to another field in AD that contains the same value as the ipPhone, that is in my case extensionAttribute5.
    HKEY_CURRENT_USER\Software\Cisco Systems, inc.\ Client Services Framework\Active Directory
    BusinessPhone
    PreferredNumber
    DisableSecondaryNumberLookups
    First two set to ipPhone and the third set to 0, and I have also tested to set it to another field in AD that contains  the same value as the ipPhone, that is in my case extensionAttribute5.
    The above values comes from these two urls,
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/8_5/english/installguide/config_active_directory.html#wp1141403
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/8_5/english/installguide/config_active_directory.html#wp1137551
    The later url have this
    Table 3-9 LDAP Registry Subkeys
    Subkey   Names
    Description
    LDAP_AttributeName_primaryPhoneNumberForSearches
    Specify   the phone number that you use to resolve most LDAP queries. This value must   match one of the values specified for the following LDAP keys:
    •LDAP_AttributeName_businessPhone
    •LDAP_AttributeName_homePhone
    •LDAP_AttributeName_mobilePhone
    •LDAP_AttributeName_otherPhone
    The   values that are valid for the LDAP attribute keys listed above are:
    •telephoneNumber
    •homePhone
    •mobilePhone
    •otherTelephone
    •a   custom LDAP attribute value, for example, myCustomPhoneNumber
    The   value of the LDAP_AttributeName_primaryPhoneNumberForSearches key must match   one of the values in the list above, for example, telephoneNumber. Otherwise,   the value of the LDAP_AttributeName_businessPhone key is used.
    The version of CUCiLync is 8.5(3)-4.5.9, that is the latest I can find on the support download page, have also tried with earlier version 8.5.(1).
    Does anyone have any suggestions for how to achieve this, if at all possible?
    Roger Kallberg

    This is the reply we got from TAC.
    Regarding to your query, Can you please go through the attached flow diagram (also you can see it in the link given below). I hope it will clarify more on the telephone number display behavior in office communicator.
    As per this flow chart presently your setup is working as designed. As per the design, the number should be in E.164 format in order to be available in MOC.
    You have AD in your network as a source, so  OCS pulls this information from LDAP it is integrated with. As per Microsoft, here you need to add Normalization rules to OCS to normalize the number into the E164 format.
    http://technet.microsoft.com/en-us/library/bb964002%28office.12%29.aspx
    Phone number display for MOC contact:
    •-          OCS will not provide a contacts number unless it is correctly formatted to the E.164 standard.
    •-          The Address Book Service on OCS processes the contacts phone number and attempts to normalize it.
    •-          If correctly normalized then the number is inserted into the OCS address book.
    •-          Communicator will only display this normalized number if it is properly formatted in E.164 (+13125551234).
    •-          The E.164 standard defines an international numbering plan for public phone systems.
    •-          In the E.164 standard, each number contains a country code, an area code, and a subscriber number.
    •-          Each phone user has a globally unique number.
    •-          In Cisco UC Integration for Microsoft Office Communicator, phone numbers in E.164 format must begin with a plus character ("+").
    I have done some research to your first question. Can you please just go through the blog given below from the Microsoft.
    http://blogs.pointbridge.com/Blogs/schertz_jeff/Pages/Post.aspx?_ID=26.
    It tells that If the numbers not in E.164 format then the number will not appear in office communicator if LDAP integrated. Can you please check with Microsoft to see their inputs on this.

  • I have 2 iphones and 1 ipod touch. how do i use the same itunes on the home computer for each? all we use the home computer for is one big music database.

    i have 2 iphones and 1 ipod touch. i want to use the same itunes music database for each device. we did this before with our older ipods, by just sycing what was checked. does this work the same way with the new devices?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    http://support.apple.com/kb/HT1495

  • My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5.  I now have Maverick ISO and it will not let me load my software so I can continue my film work. ???

    My HD died on my iMac. I replaced it and lost everything that was on it. I found my source disks from my original purchase for Final Cut Express HD 3.5.  I now have Maverick ISO and it will not let me load my software so I can continue my film work. How do I get it too recover it without paying for it again since I paid for it already and have projects in progress that need to be completed?

    1) Partition your hard drive or add an external drive and install Snow Leopard (with the Optional Rosetta) into it and then you can dual-boot (System Preferences:Startup Disk) into Snow Leopard and run FCE 3.5 there.
    2)  Use one of the following methods to install FCE 3.5 into Mavericks:
    a)  Pacifist:  http://www.charlessoft.com/
    b)  Jeremy Johnstone's Terminal method:  http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html
    Reports on this forum seem to confirm that Final Cut Studio 2 will continue to operate in Mavericks once it is functionally installed, albeit some plug-ins may fail to function.  FCE 3.5 is the same generation as FCS2, and presumably will continue to operate in Mavericks, as well.

  • ORA-04054 : using variable substitution for the database link name

    Hi,
    I need to use variable substitution for the database link name.
    Here is my command :
    declare
    GET VARCHAR2(50);
    begin
    select OIA_GET_DESIGNATION into GET from INFODRI.OMA_IN_ARTICLES;
    for rec in (select * from [email protected]_GET_DESIGNATION)
    LOOP
    dbms_output.put_line('TEN_CODE vaut : '||rec.ten_code);
    END LOOP;
    exception
    WHEN OTHERS THEN
    DBMS_OUTPUT.PUT_LINE('ERREUR ORACLE DETECTEE : '||rec.OIR_CUR);
    DBMS_OUTPUT.PUT_LINE('Message Erreur : '||SUBSTR(SQLERRM,1,245));
    :crd := -1;
    end;
    When I run this programm, I receive the error :
    ORA-04054: database link REC.OIA_GET_DESIGNATION does not exist
    When I replace :
    for rec in (select * from [email protected]_GET_DESIGNATION)
    by :
    for rec in (execute immediate 'select * from tensions@'||rec.OIA_GET_DESIGNATION)
    I receive the error :
    PLS-00103 : Encountered the symbol "IMMEDIATE" while parsing.
    What can I do to resolv my problem ?
    Regards,
    Rachel

    What is the name of the DB Link and the name of the object you are selecting
    from?
    I find it easier to create a view on the remote object then use that in selects.
    e.g,
    Link Name = MyLink
    Object_name = Addr_Loc
    create or replace VIEW Rem_Addr_Loc AS
    select * from addr_loc@mylink;
    In the code I then use the view
    begin
      for C_Rec in (select * from Rem_Addr_loc)
      loop
         dbms_output.put_line('Rec: '|| C_Rec.Col1);
      end loop;
    end;                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    Hi Samcat,
    You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
    Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

  • I have an iphone and ipad but no other computer at home.  I used to have itunes on my work computer. How to I access and make changes to my itunes without another computer?  thanks

    I have an iphone and ipad but no other computer at home.  I used to have itunes on my work computer. How to I access and make changes to my itunes without another computer?  thanks

    At this point you have the option of keeping a device optimized version (lower resolution version) of your photo on your phone while iCloud stores a full resolution version.  Or keeping the full resolution version on both your phone and the iCloud. If you delete the photo on your phone it will be deleted on the iCloud. I know, bummer. Also it should be noted that the photos app and the library are still in beta and to this point i see why.  I would use dropbox or a smiliar app for off device storage.
    So far this is how it has been working/not working for me.  Whether or not I choose to keep originals or optimized on my phone it will only keep the originals and it has only been uploading lower resolution versions of my photos to the iCloud library.  Seems to be working in reverse.
    Again these are still in beta so i am hopeful that this will be fixed in the near future.
    I hope this helps.

Maybe you are looking for