I use Firefox v12 but History only lasts for one month and then suddenly I lose all History except for Today
In the past 2 days, HISTORY was available for Today, Yesterday, 7 days and 1 month...suddenly it all disappeared and only Today and yesterday's History is available.Yes in Settings Privacy.. I have..."remember history" so whats the problem???
If Firefox has crashed or otherwise hadn't closed properly then session data may not have been saved or files may have become corrupted.
You can check the settings for Clear Recent History.
*https://support.mozilla.org/kb/Clear+Recent+History
You can try to do some maintenance on the places.sqlite database file:
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
Similar Messages
-
MacBook Pro will only last till 90% battery and then shuts down. Tried smc reset to no avail.
MacBook pro only lasts a few minutes on battery and then shuts down!
elgordo8251 wrote:
How long do these batteries usually last?
It varies. Some do not even last 1 year but others 4+ years.
Apple provides only 1year warranty.
Best. -
Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.
ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3." -
Can i use my previous apple ID on my new iPhone ? It's asking for a new ID but i only have the one email address
Yes. We need more details...exactly what do you mean by "asking for a new ID"? Where do you see this?
-
Just downloaded DW CC. Bought expensive book that tells me to use "Expanded Workspace" but the only options I see in window or workspace button are "Design" Extract" and one other. No where can I find "Expand" or "Compact" which the books says are the two choices.
Glad to be of help .
I won't be spending any more money on expensive books now that I know you can't actually get one that applies to the latest version.
Don't get me wrong. I like books. Classroom in a Book series is an excellent resource to have. You will learn a lot from it. Just don't get side-stepped by Creative Cloud's update schedule. No publishing house can keep pace with it. If you stay informed about new releases from Adobe's "What's New" Blogs, you will get your money's worth out of your books. Online Help (F1) is another good resource to use since it is updated fairly often.
Nancy O. -
Running Windows XP SP 3, Every site, including this one, tells me I am using Firefox 2, but I am using Firefox 3.6.8 according to the Help button. I have re-installed and restarted several times to no effect.
== This happened ==
Every time Firefox opened
== I upgraded.See [[Finding your Firefox version]] and [[Web sites or add-ons incorrectly report incompatible browser]]
See also http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
Check the '''general.useragent''' prefs on the '''about:config''' page.
You can open the ''about:config'' page via the location bar, just like you open a website.
Filter: '''general.useragent'''
If any ''general.useragent'' prefs are bold (user set) then right-click that pref and choose ''Reset''. -
i'm using firefox 6 but yahoomail is not loading,whenever i tried it doesn't opening properly.but in IE it loading properly.please give me a perfect solution of the problem.
I had this problem as well, and I found this discussion. There is no need to disable AdBlock, just check your filters and remove any rules related to yahoo domain. After this it started working for me, and all 3rd party ads are still not showing up.
-
Slideshow in "photos" only lasts for few minutes and spontanoeous shift to homepage.
slideshow in "photos" only lasts for few minutes and spontanoeous shift to homepage.
Don't worry. If something was up, OnyX would have given you proper warnings and recommendations. On your next render, can you set the render logging to Extra per Frame Info? Also, if you don't mind, untwirl the render info and see, which parts it is processing. Either the life info reveals long file read and write times or the render log may reveal odd variations in teh per-frame render times. A common problem for instance with multi-processing are the first few frames being rendered very fast, but then a longer gap occuring inbetween because the program chokes on writing too many files at once. Similar patterns sometimes appear with network setups or - ultimately relevant for you - with RAIDs that use large cache drives. In the latter case often reducing or turning off the harddrive's internal cahe using the vendor's configuration tool can improve things...
Mylenium -
4.2.1 was supposed to fix problems, but it only created new ones. No video on some movies, no audio on others, and can't even play some movies. Can you please provide a means to restore 4.1.1?
Let me try again, Chenks. I'm a technical person by profession, and so can get deeper into things like this, but I have not attempted to use these methods of communication in the past. I'm trying to get some feedback to Apple on their worsening a product and really messing with existing customer configurations. I'll try to break things up below.
1. Configuration:
Existing Apple TV and Mac Mini configuration in place since December 2010.
Three Apple TVs, one in Family Room for music and movies, one in Master Bedroom for music and movies, the third one in the Living Room for music only.
I'm using iTunes as library. (Probably an obvious statement, but wanted to mention that.)
2. Pre 4.2.1
No problems at any location since configuration finalized and all equipment installed in December.
Since December, Family Room entertainment equipment was updraded to a new Sony Bravia 3D, and a new Pioneer receiver. The Master Bedroom still has the original Toshiba 32HLC56 TV. That unit has only one HDMI input. I'm using the built-in speakers. This TV/Monitor is about fives years old.
3. Problem
I updated the software in two of the Apple TVs to 4.2.1. I updated the Family Room device and the Master Bedroom device. I had not updated the Living Room device.
After updating to 4.2.1, the Family Room equipment works fine. That's the location with the newer TV and receiver.
The Master Bedroom has different problems with different movies: e.g. "The Little Mermaid:" video, no audio. "The Lion King:" movie wont start at all.
Additionally, in the Master Bedroom some movies work fine, other movies start but immediately go into pause mode. Pressing pause button on Apple remote will not initiate start of movie, screen does "flicker" for a moment but movie does not start to play, showing only the last frame that had been streamed.
4. Not really a problem for me.
Fortunately for me, I had not updated the Apple TV in the living room so I used it to troubleshoot the problem. Initially I thought it was a defective Apple TV in the Master Bedroom. I took the unit to the Apple Store in town and they exchanged it for me. I brought the replacement Apple TV home but I did not install it immediately.
While testing the Master Bedroom set up once again to make it was working for our afternoon movie watching, I was again reminded that a software update was available. That message came up because it was the unit I had brought over from the Living Room. I proceeded to update the Apple TV to the new software version (4.2.1).
As soon as I "updated" the software in the Apple TV to the new 4.2.1, the same problems manifested themselves. At that point I suspected that the problem was with 4.2.1, and not with the hardware.
I called Apple Support and went through a series of troubleshooting techniques. We tested the Apple TV with the new 4.2.1 installed in it. This is the unit which originially in the Living Room. Under the direction of the Apple TV support technician, I used the Family Room gear and the Master Bedroom gear to try and isolate the problem to hardware or software.
We eliminated the following as potential problems:
a. TV speakers in the Master Bedroom
b. HDMI cable
c. Ethernet connection
5: Conclusion:
Fortunately for me, again, the Apple TV that the Apple Store had given me that morning still had 4.1.1. So I installed that unit in the Master Bedroom and everything started working normal again.
6. Side note:
An interesting observation: In early March I copied several movies from the Mac Mini to my iPad and some to my wife's iPad. All movies worked fine on our flight out and while we were away.
My wife recently (about a week ago) updated the software in her iPad. and now some of the movies that played just fine on her iPad are exhibiting the same problems as the Master Bedroom TV when it is connected to an Apple TV with software 4.2.1.
Apple has been trying to fix some problems in 4.2 when it released 4.2.1. I make that observation based on recent articles I found on the web. Most likely the Apple engineers were trying to fix things in one place and broke them in another.
Clear as mud, isn't it?
7. In closing:
I'm good to go, I just need to remember not to update the software in the Master Bedroom Apple TV. I want to keep that unit at 4.1.1. It's possible that Apple might come to the realization that they hosed things for some of us. Because I do have three units in my home, I can experiement with the other two units should a "fix" come out. I can then update one of the two devices, connect it to the Master Bedroom TV, and see if the problem was corrected. If not, I stay with 4.1.1. But I'm not convinced that Apple will see this as their problem, it's always easier to point elsewhere.
Regards, -
I turned off firefox update but it is getting turned back on and telling me firefox 5.0 is available. I don't want firefox 5.0 until all my plugins work and I don't want to be bothered. I will followup in a few months on update. I use Ccleaner to delete tracks/history/cookies/passwords/site pref and to compress FF DB.
Hi czigrand,
Thanks for visiting Apple Support Communities.
Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
iTunes: Sending iTunes Gifts
http://support.apple.com/kb/HT2736
Best Regards,
Jeremy -
When I close Firefox and then come back to it later a box comes up that says it's already running. It says to close Firefox first but when I hit close nothing happens and the box comes up again. I have to shut down my computer and restart to get into Firefox again. If I can't get this fixed I will start using someone else. Someone told me a way to close Firefox but I forgot what they said.
== This happened ==
Every time Firefox opened
== a couple of months agoHello Brian.
You don't need to restart your computer to open Firefox again: you just need to close it manually through your application manager (CTRL+SHIFT+ESC in Processes tab). Anyway, hopefully this support article is what you need:
http://support.mozilla.com/en-US/kb/Firefox+hangs
What's probably happening is that you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author. -
I bought and downloaded the Movie Hannah on my iPad, but it only plays about 2/3 and freezes... Is there a way to re-down load?
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
Can I use firefox in webview? what is the package name and the activity name?
Can I use firefox in webview? what is the package name and the activity name?
I saw : intent.setClassName("com.tencent.mtt", "com.tencent.mtt.MainActivity");
but what is the name for firefox?rahulmcadit wrote:
The phone is from UK and the carrier on which phone has been locked is "ORANGE". I want to use the same phone in India. I want to unlock the phone. Can you please suggest me what is the procedure to unlock the phone. How can I pay the amount to ORANGE carrier and can use my iphone in India.
Contact ORANGE to unlock it.
See this -> http://support.apple.com/kb/HT5014 -
My ipad went blank last night for no apparent reason. It was on one minute, and then completely dark. I didn't touch it, it just seemed to have died. I tried turning it back on/off, but nothing happens. Anyone else have a similar situation?
Thansk for the reply King_Penguin...let me elaborate and see what you think...I had the ipad2 in the office and saw the battery was getting really low. I tried charging it with the iphone charger (connects to my pc at work). It took a while, but it got enough juice in the ipad2 to bring it back to life. when I got home, I hooked it up, and got to about 50%. All was fine, then I was attempting to hook it up to my TV with the AV adapter (or VGA adapter, whatever it is), left the ipad alone for a minute, came back to it, and that's when it went dark. I tried the home/sleep buttons, but only for about 5 seconds...any other suggestions in case that doesn't work? Thanks again...
-
I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!
Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
So, the options are to upgrade to a newer OS X or use Firefox or Chrome.
Be aware, Apple no longer support Snow Leopard v10.6 > www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
See if your Mac can run v10.9 Mavericks > OS X Mavericks: System Requirements
If so, you can download and install Mavericks for free from the App Store.
Read prior to upgrading > Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities
Maybe you are looking for
-
How can I delete photos from my phone
how can I delete photos from my i phone after synching w/ my macbook (i photo)?
-
Possible to re-install XP on boot camp partition in 10.7
Hello, I'm new to this forum and found it very useful in the past. Now I wanted to know; I am currently running 10.6 (Snow Leopard) and installed Windows XP Home Edition (32bit) using Boot Camp. If i updated to 10.7 (Lion) I know I will more than lik
-
Making a PDF Form Fillable & Saveable
I have a form that I need to have made fillable and be able to save the form. I have the form on my computer and it was created with Acrobat. However, I am not able to save the form with the information I type into fields. I need to correct this.
-
I'm trying to get a list of folders in a hierarchy that don't contain any mp3 files. (The goal here is to eventually clean up all the "empty" folders that only have album art, thumbs.db, desktop.ini, etc. files left). So I wrote a quick PowerShell co
-
Somebody please help my Aperture library disappeared!
I haven't done any updates on the program or anything,the Aperture library just disappeared!!Can someone help me find how to restore it?