I use images for presentations. Recently I've noticed a decrease in quality ( sharpness and definition) of pictures copied into Keynote. Same problem with both JPEGs and TIFF files. I've recently upgraded to keynote 09, but with no improvement.

I use images of paintings for presentations. Over the last 3 months or so I've noticed that I cannt copy images (either JPEg or TIFF) without a reduction in sharpness and definition. Hope someone can help with this problem.

Figured it out myself! yay!  (only took my entire moring)
The solution:
Dont print to PDF!
SAVE AS COPY, then select Adobe PDF and click SAVE, this will bring up a dialog box with the options you need (including the "High Quality Print" Adobe PDF Preset)
This was not clear in any of the instructions i read

Similar Messages

  • Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

    Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/

    Have you moved Pages from its installed location? Or just dragged a copy to your current system?
    It can't find some of its resources apparently.
    Peter

  • Out of the blue today, my gmail will not send.  I recently upgraded to Mavericks. But I have had not problem until today.  I can receive mail but not send. Any easy suggestions of what to do?

    Out of the blue today, my gmail will not send.  I recently upgraded to Mavericks. But I have not had problems until today.  I can receive mail but not send. Any easy suggestions of what to do?

    I have been having the exact same problem for weeks now with gmail.  None of my computers will send Gmail (they will recieve) and my Maverick computers (10.9.1) show gmail smtp.gmail.com as "offline".  I had installed Post Box and apple support thought it was that i had too many accounts (I have 2 ipads, an iphone (latest iOs), a work and home iMac and a powerbook).  I disabled all my gmail accounts in Mail and still no go from PostBox either . I tried connection doctor and it just spins for outgoing and say I either haveve the wrong pw or login - I dont.  I terminaled and tested port 465 (according to gmail instructions) and it works (port 25 did not).  I can access gmail from the webmail and send/recieve mail from it and it shows up in my webmail outbox. It is configured for imap.I just cannot send mail at all from any gmail account from any apple device using Mail (or PostBox). I am at a loss as was the apple support person who wished me good luck very politely and sympathetically.

  • After recent upgrade Mozilla will open but does not connect - I have Norton Antivirus.

    After recent upgrade Mozilla will open but does not connect. I have uninstall/reinstalled several times. I have NortonAntivirus.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
    *https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

  • I currently have the 55 gb of ICloud space that I'm using mostly for e-mail. ICloud has sent out a note that I will be downgraded to 5 gb. Is ICloud stating that there will no longer be an upgrade to 50 gb even if you pay for it?

    I currently have the 55 gb of ICloud space that I'm using mostly for e-mail. ICloud has sent out a note that I will be downgraded to 5 gb. Is ICloud stating that there will no longer be an upgrade to 50 gb even if you pay for it?

    I wouldn't think so. Everyone who migrated from a MobileMe account got an extra 20GB free until 30 Sept, and the emails now being sent out presumably go to everyone regardless of any subsequent storage purchase. As you've paid for 50GB this should be unaffected (but I should keep an eye on it!). If you have any uncertainty about what is going on you should contact Suppport at http://www.apple.com/support/icloud/contact/

  • Using Images for Tabbed Panels

    I'm trying to use button images that I created in photopshop as the background for the tabs of my tabbed panel widget in dreamweaver. I tried this by inserting the folling code into the css (note bold line):
    .TabbedPanelsTab {
    position: relative;
    top: 1px;
    float: left;
    padding: 4px 10px;
    margin: 0px 1px 0px 0px;
    font: bold 0.9em sans-serif;
    background-image:url(images/tabs.gif);
    list-style: none;
    -moz-user-select: none;
    -khtml-user-select: none;
    cursor: pointer;
    color: #FFF;
    I also tried using  background:url(images/tabs.gif) in place of background-image:url(images/tabs.gif) but it still won't work. What do I need to know about using images for my tabs?

    Have a look here
    http://www.adobe.com/devnet/dreamweaver/articles/spry_widgets_design.html

  • HT200040 I'm a still photographer who is using Motion5 for presentation of my work.

    I'm a still photographer who is using Motion5 for presentation of my work. I'm exporting images out of Photoshop at 4000, 3840 or 1380 pixels wide at 72 DPI
    I;m trying to see which file size will render me the best sharpiness for my images. I'm having issues because as a photographer I need my images to render very sharp when view in my Motion5 projects. I look at the properties menu the canvas size is 1280 by 720. Yes I know Motion5 is rendering my files at 30 frames per second or something like that. Yet I need sharp rendering of my images, help

    For maximum sharpness, your canvas should be 1920 x 1080 for HD output and set your export settings (or Canvas Render settings) to Best. Upon export, you can access that property in the export dialog from the Render tab > Render Quality -- the default is Use canvas setting, but you can override your canvas settings here.  Since one of your pix sizes is 1380, then the 720 canvas would be the maximum size you could use. You do not want to scale images larger to fill the canvas as they will soften in appearance, but you can always scale images down to fit the canvas and retain their "apparent" sharpness (you still lose pixels and fine detail, but the images will sharp).
    HTH

  • I hav recently upgraded to ios5.1 but after upgrading my ringer volume got low plz can nyone help me

    I I hav recently upgraded to ios5.1 but after upgrading my ringer volume got low plz can nyone help me

    You may refer to the web below for the upgrade steps.
    http://event.msi.com/2013/win8-1/Update.html
    After you finished the upgrade, try to update your intel/nvidia driver.

  • I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

    I have an HP Pavilion zv6000 laptop with which I have used iTunes for years. I downloaded iTunes version 11.1.4.62 and rcvd error msgs (Apple Mobile Device failed to start. Verify sufficient privileges to start system svc. Then a MSVCR80.dll not found.???

    Hello Don,
    Thank you for the details of the issue you are experiencing with iTunes.  I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described.  The following article has steps to do this(it is important to remove all components in the order listed):
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    I recommend continuing with these articles if you continue to experience issues with iTunes:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I currently am using CS3. I am experiencing a problem when I am uploading my scanner in photoshop. It quits everytime I try to use it. I recently upgraded to OS X Yosemite

    I currently am using CS3. I am experiencing a problem when I am uploading my scanner in photoshop. It quits everytime I try to use it. I recently upgraded to OS X Yosemite. Can you help me?

    first, update your scanner's drivers.
    How to Add a Scanner to CS3 | Chron.com

  • Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

    Issue for the past 2 hours. Cannot make or receive calls in Little Falls, NJ. Is there a problem with the local tower?

    You haven't enabled VoLTE (Advanced calling) have you?  Not that it makes a difference just curious. 
    Have you upgraded to Lollipop yet?
    Could be hardware or SIM card issue, read through this thread:
    I can't make or take phone calls, but i can message and use data. Has this happened to anyone else? I've gone through three Samsung Galaxy S5's in the past three days, two of which have this problem and one just stopped working all together.

  • Ipad air using iOS 8.1.1 refuses to mirror or use airplay. Same problem with iPhone 5c.

    I use an iPad Air to deliver keynote presentations via Airplay using Apple TV.  Did this a few months ago no problems. Tried yesterday to deliver a presentation iPad refuses to mirror/airplay. Both are on same wifi - signal is good. Select tick box for airplay (mirroring tab is selected) but nothing happens! After barely a few seconds tick box jumps and selection is removed. Tried hundreds of times same result. Have tried powering down and re-staring all the equipment no joy. Restarted router no joy. Interesting to note have same problem with iPhone 5C (and 4S which is still on IOS 7). Any help gratefully received.  Thank you.

    By accident solved my own problem. Apple TV and iPad were working on the same wifi network, close to the router, with a strong signal. That signal is boosted to the far corners of the house via a network based on the Airport Extreme & Express units. Perversely Airplay & mirroring only works when picking up that weaker wifi signal via a different channel! Now to see if a similar solution works for the iPhones.

  • Upgraded one iPad to 8.1 about 10 days ago since then have to restart wireless hub each day to use, other iPad on previous os no problem until upgraded yesterday now have the same problem although both devices show wireless connection.

    we have two iPads (ipad2 and an iPad mini). The ipad 2 was upgraded to os 8.1 about 10 days ago, since then I have to restart my wireless hub every day to use the ipad. I have however been able to use the iPad mini running on the previous os without any problem. Last night I upgraded the mini to os 8.1 and this now suffers the same problem. Both iPads display a strong wireless signal to my hub but don't want to seem to connect.  I have had BT check my broadband connection and they found no problem, whatever is causing it has happened since upgrading from 8.0.2 to 8.1

    Do you have an updated version for your AirPort?

  • I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

  • Upgraded to 3.6.9 and now will not bookmark, automatically reloaded 3.6.2 twice, now on 3.6.10 same problem with bookmarking, safe mode makes no difference

    After upgrading to 3.6.9 firfox will not bookmark some pages, once would not load, has twice atomatically re-installed 3.6.2. Upgraded again to 3.6.10 had have same problem with bookmarking

    The answer is in the diagnostic! Go to the Toshiba site (I've been so nice and found the link for you!)
    http://www.toshiba-europe.com/storage/Index.asp?page=PFT&nav=ISH_ARC&model=SDR22 12
    Try updating your drives firmware. Click 'Firware Updates' on the right hand side of this page, then follow the instructions and download the update, then install. See if that helps. Its worth updating the firmware anyway :P

Maybe you are looking for

  • No problem, just some advice needed....

    Hi everyone, I have an iBook G4 and would like to buy a cheap webcam to skype my family, but one that I borrowed had no mac drivers and so I couldn't use it. Since then, whenever shopping, I have looked at all the boxes for webcams and found that non

  • How can I enforce automatic spell checking for selected fields of data entered by form users?

    I'd like to be able to enforce spell checking of selected fields in the forms that I've created using LiveCycle Designer 8.2 at run time, as opposed to design time.  I understand the version LCD 8 has a nifty new spell checker for form designers.  Bu

  • Unfortunately, Vibe has stopped

    Hi Everyone! I am unable to open a .pdf document from the Vibe App on any Blackberry BB10 devices. I also tried the android version and the same behavior repeats itself. Is this a common issue? Thanks

  • Why can't I install iOS 8.0 on my iPhone 5?

    Why can't I install iOS 8.0 on my iPhone 5?  When I try to install it, a message says that I need 4.6 GB of storage available to install the update to the operating system, although the specs from Apple state that the update is 957 MB.  I have 1.2 GB

  • How can i install the web connector in the IWS for IAS SP3?

    i have installed the IAS 6.0 SP3 and IWS 6.0 on two different NT server. How do i install the web connector to the IWS. How can i access the IAS form the IWS. The IAS 6.0 SP3 Evaluation does not allow to install only the web connector componet. Pls a


HashFlare