I use the airport modem for my computer and wireless devices. I can't access with my iphone. It won't take my passcode. This passcode works with some of my wireless devices but not others. Can you help me?

I use the Airport Extreme modem for my computer and wireless devices. I can't access my iphone 4 and 4S. It does not accept my passcode. My wireless laptop and wireless tower computer does accept the password. Can you help me?

You really have an iPhone question here.
Start with the Troubleshooting Guide for iOS devices:
http://support.apple.com/kb/TS1398
Post in the correct iPhone support area if you need more assistance.
Using iPhone

Similar Messages

  • Can I use the same itunes for my ipad and iphone?  Will the computer erase my other device information?

    Can I use the same itunes for my ipad and iphone on my computer?  Will the computer erase my other device information?

    The computer will not erase the information.  Each device will show up in iTunes as a separate device and you can control the information for each device through iTunes.

  • HT3728 I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

    I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

    You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
    In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
    More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express.

  • HT204411 Why are some music artists available to download for some countries (i.e USA) but not others (i.e UK)?

    Why are some music artists available to download for some countries (i.e USA) but not others (i.e UK) on Itunes?
    It's so frustrating!

    Welcome to the Apple Community.
    Because that's the way the music labels want it.

  • I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible?

    I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible? And if it is how an i doing this?

    Hi I Pant,
    The idea that crossed my mind was to tie each of the lines coming from/going to "your device" to two of the DIO lines. Configure one these two ports as input, the other as output.
    When you want to read the state of the line, read from the line configured as input. Similarly, use the other port when it is time to write.
    Provided "your device" uses tri-state drivers/receivers, or can be used in a "wired-OR" configuration, this may work.
    What is "your device"?
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Do I use the same password for apple ID and for iCloud?

    I am not getting mail on my iphone or my ipad air!
    When I put the password for my apple ID into icloud- it keeps reverting to another password. i.e. doesn't hold the apple ID password.
    Is this a problem keeping the mail from getting to my phone and ipad?
    DO I USE THE SAME PASSWORD FOR APPLE ID AND ICLOUD?
    Help. and MERRY CHRISTMAS

    What are you trying to do when you say "When I put the password for my apple ID into icloud- it keeps reverting to another password"?
    Where are you doing when you try to enter your password?

  • How do I set up my iPhone as a modem for my computer and my iPad ?

    How do I set up my iPhone as a modem for my computer and my iPad ?

    Thank you. Does this mean I can get rid of the mobile modern on my computer and the pre paid sim card in my iPad if I choose? (data and plan considerations aside) 

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • 11n AirPort 5GHz Band configuration using the Airport utility for PC

    I am trying to configure a new AirPort Extreme Base Station to operate in the 5GHz band. I am using a PC with the Airport utility to connect to the base station. Using the utility, in the base station manual setup I am able to select 802.11n (802.11a compatible) however I am unable to select a channel in the 5GHz band. Also, once I update the settings (5 GHz band) to the base station it goes to channel 1 which is in the 2.4 GHz band. As a result, I have the following 2 questions:
    1) How do I set up my base station to operate in the 5GHz band?
    2) How can I specify a channel in the A band?
    Any help would be appreciated.
    Thanks
    Windows XP

    You should be able to configure if the Airport Extreme (n)'s LAN ethernet is plugged into your ethernet. If the WAN is plugged, you will be blocked untill you specifically setup the AEXBS to let it be configured over the WAN port. But to do that you need to be able to configure, so see my first statement. Or use wireless, as someone else has suggested.
    Jeff

  • My laptop is connected to company LAN on wire and I have another active wifi connection provided by a router. Can I use the wifi connection for mozilla connection and the wired for everything else? I'm on Win7.

    I have 2 simultaneous active connections:
    no1: wired connection to company lan; private IP 172.19..
    no2: wireless connection to unrestricted traffic router; private IP: 192.168...
    my question: can I use the wireless connection for mozilla traffic and the wired for everything else?
    I'm on Windows7 Prof, all security updates installed.

    Go to Control Panel > Network and Internet > Network and Sharing Center >
    Click Change adapter settings from left panel > Open the network connection you want to change the DNS servers for by right click and select Properties > Select
    Internet Protocol Version 4 (TCP/IPv4) and click Properties button > Choose the
    Use the following DNS server addresses > enter the IP address for a
    Preferred DNS server as well as an Alternate DNS server.
    Primary DNS: 8.8.8.8
    Secondary DNS: 8.8.4.4
    This IP belongs to Google public DNS.
    Note: Wired connections are usually labeled as Ethernet, while wireless ones are usually labeled as
    Wi-Fi or Wireless Network Connection.
    Uncheck Internet Protocol version 6
    Mark as Answer if it's worked. Thanks. Balamurugan_Subramaniyan

  • HELP, i was used the beta version for ios 7, and i put my phone into dfu mode. And now, it won't activate. PLEASE HELP!?!?!

    Le question basically.

    Bummer for you then, huh?  Guess that's what you get for using pirated software.  You've forfeited your abilit to get assistance on this forum by pirating Apple's software.
    Look elsewhere on the internet, or pay $99 to join as a developer and then you can get access to the forum that might have your answer.

  • My password is not working and I can not change it or use my Apple ID. I know it is the correct one because I have used the same one for a while and keep it locked in a safe.

    My password no longer works, I have tried to change it but can not. I know it is the correct one because I have not changed it and keep a verification in a safe. It works a few weeks ago.

    Had similar issue calling Apple seems to be the only way to resolve the problem.  The issue can be resolved when you get to iTunes, since they are the ones that keep  this info. They will ask you your security questions and your purchases software, music etc. Once they are happy with your answers they will get you back up. If you choose you could go the route of forgot my password etc. but I never had any luck with that. Just my 2 cents.
    Steve

  • Firefox will not open. I have tried to uninstall and this wont work. I have laded beta version but I still can't uninstall earlier version. I would prefer the earlier version working. I have tried to update this version and that wont work either

    I can't open firefox. I have tried to update, repair and uninstall and nothing works. I have checked that it is not already running. I have restored my pc to an earlier date, completed scans but it will still not work. I have loaded the beta version ok but I am not keen on it and would prefer the earlier version.
    Can you help please

    http://www.oldversion.com/Mozilla-Firefox.html
    Got to this site and there you can find older versions of firefox
    Vet

  • FCP recognizes some h.264 mp4 files but not others

    I'm having a particularly frustrating experience with Final Cut Pro 7 at the moment. I've been working on a project for a while now, and I've been importing and cutting with mp4 files that are in h.264 codec with AAC audio. It's been working just fine for a long time now.
    Now, I have three more video files to import into the project. They are THE EXACT SAME format: mp4, h.264 codec with AAC audio. Data rate is pretty much the same. Technically, everything I can see about them, format-wise, is exactly the same.
    It's not recognizing them. I get "File Error: Unknown File".
    I've tried playing them in multiple players. Quicktime, Quicktime 7, VLC... they all work just fine. The inspector in Quicktime tells me the EXACT SAME format information as the files that are importing just fine.
    Can someone PLEASE shed light on what the **** is going on here? Why are all the rest of h.264/AAC/mp4 files that I'm importing working just fine while these three are not? I've looked at their logging/format information... it's all exactly the same. There's no perceivable reason that I can find why Final Cut is singling out these three files not to recognize. I thought maybe something had changed with Final Cut and it no longer works with h.264 or mp4 or whatever... but all the other files I already imported are still working just fine. And I can still re-import them just fine. So it can't be that FCP just doesn't recognize MP4 or H.264 or AAC, because it's recognizing it just fine with all the other files. Again, they're all in the EXACT SAME format!
    And yes, I've tried re-coverting these files. I've converted them using different programs. They always end up working fine for playing in all the players I have, but when I go to import them into Final Cut, suddenly they ain't working. I'm pulling my hair out trying to figure out why and I'm completely clueless.
    Has this happened to anybody else and what did you do? I know I can just try converting them to another format, like ProRes or Apple Intermediate... but that would take up more space on my computer... plus, it's just the mystery of the situation that's really getting to me right now. I want to know WHY it's not working! For the life of me, it doesn't make any sense.
    Also: I thought it might have something to do with Perian. I recently uninstalled and reinstalled Perian. Since I did that, Perian hasn't been working very well. Quicktime doesn't play the audio in mkv files, for example.
    But if Perian not working is preventing FCP from recognizing THESE mp4/h.264/aac files, then why are the rest of the mp4/h.264/aac files still working just fine? Again, it just doesn't make any sense to me. It's like FCP got picked on by these three files and is holding a grudge.

    I know h.264 is not ideal. And you're right, I have had issues with sync on export and such that I've had to deal with. But it still worked. I was able to import and edit with the files, despite having some glitches along the way.
    Now it's just plain not importing. And I have no idea what changed. Final Cut didn't change. It's still importing all the files it likes just fine. They're mp4/h.264/aac, and they import. These three files that aren't importing are the SAME format, but Final Cut doesn't like them for some reason. I would love to know what that reason could possibly be. What could possibly make one mp4/h.264/aac file import, but another one not?
    JUST talking about importing. Not editing or exporting.

  • Using the same Realm for passwd auth and ssl auth

    Hi,
    does someone can tell me if it's possible to use the same Realm to authenticate
    some client with username,password and other client with certificates.In other
    word can a same realm support 2 different authentication method
    Thanks a lot
    romain

    Yes.
    The AbstractListableRealm, which I assume you're extending,
    has three methods:
    authUserPassword :
    checks passwords
    authSSLCertificate :
    is passed in the certificate verified by the SSL
    handshake. The default implementation of this
    method hands the certificate to the CertAuthenticator
    (if there is one). The CertAuthenticator typically
    uses one of the fields in the certificate to come up with
    a user name (eg. the email address minus the @ stuff),
    then verifies that there is a user with that name in
    the realm. Since SSL verfied the certificate, this
    method doesn't do any further checking. I think we
    ship a SimpleCertAuthenticator sample that you can
    look at.
    authCertificates :
    Like authSSLCertificates except that the certificate
    came from someplace else. I'm not sure under what
    conditions this is called.
    Normally, the realm worries about the user/password
    authentication then relies on the CertAuthenticator for
    the certificate stuff. The CertAuthenticator maps the
    certificate to a user name then goes to the realm to
    make sure that there really is a user with that name.
    -Tom
    "romain" <[email protected]> wrote:
    >
    Hi,
    does someone can tell me if it's possible to use the same Realm to authenticate
    some client with username,password and other client with certificates.In
    other
    word can a same realm support 2 different authentication method
    Thanks a lot
    romain

Maybe you are looking for

  • Noise tracking

    Hi, I am trying an application of Noise Tracker. I am using the PXI DSA board (4472) to track the sound and I am using 7 microphones. I am planning to integrate this array with a camera, (probably a fire wire camera with CVS). I need some help on noi

  • Black thumbnails and pictures

    Hi all, I've been having this problem lately with my iPhoto, when I try to import photos into my iPhoto from only one particular camera (my other camera when importing photos does not have this problem). All the vertical photos come up as black, also

  • HT4798 Changing back to Admin User ID from 502 to 501

    I have just used Migration assistant to my new iMac with Mountain Lion. In attempting to re-install images into Aperture I get the error message that I dont have permission. Can I change my User Admin ID from 502 back to 501 in order to regain my Adm

  • IPod Broken?

    I need help in this because I seriously have no idea what to do anymore. After I updated the iPod with the 1.3 update, the battery completely shut down. Every time I had it on charge it displayed as fully charged, yet the second I took it off it shut

  • Problem with Facebook & Twitter integration in OS X Mountain Lion

    I recently downloaded OS X Mountain Lion from App Store, everything went okay until the next few days I noticed that Facebook and Twitter integration doesn't seems to work anymore. Whenever I clicked on 'Click to tweet or post', nothing happened. Hel