I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?
I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
OS X version 10.9.2
Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
Now
Have you tried to repair the disk yet
Similar Messages
-
Limiting Space used on external HDD for Time Machine
I'm really clueless on how this works and I would appreciate your thoughts on this. I recently bought an external HDD and I want to limit the allocated space for TM to only half of the capacity. I recently formatted the external HDD to FAT32 in order for me to use it with my other systems.
Is it possible to make this work? I saw an article wherein you can create a disk image in the external HDD, will that work?
Below are some specs of my external HDD:
Objective: Use Time Machine on my 1TB External HDD while limiting the space to only 400MB for back-up.
External HDD Settings: Iomega External HDD formatted as FAT32 and Master Boot RecordHello,
Here is the best solution I can think of without using any extra software to alter your Time Machine settings.
You could use Disk Utility to divide the 1 TB external HDD into two partitions (400 GB + 600 GB).
(/Applications/Utilities/Disk Utility.app)
Warning: Using Disk Utility to divide the drive into two partitions will erase everything on them.
Once that's done, when you reconnect your hard drive to your computer, and open Time Machine in System Settings, you could assign Time Machine to the 400 GB partition.
Here is the catch though, Time Machine cannot backup to FAT32, so you would have to format at least the 400 GB partition as "Mac OS Extended Journaled" with Disk Utility. If you want to use that drive with other non-Mac systems, best solution would be to share it over the network.
That is the best I can think of for your problem. Hope that helps. -
HDD for Time Machine and other stuff
Just a very short question.. Can I use my external harddrive for Time Machine and for example putting files on it to take it to my friend, or the otherway around, put files on it and take it back home?
The reason I ask this is that I hooked up a USB HDD and it said I needed to clear all the data on the disk first before using Time Machine.As you probably already figured out.. I don't know anything about External HDDs. That's why I want you to ask which of those LaCies you would suggest for TM with 40GB of used data and it needs to be fast:
1: http://www.lacie.com/products/product.htm?pid=11022 (320GB)
2: http://www.lacie.com/products/product.htm?pid=11013 (320GB)
3: http://www.lacie.com/products/product.htm?pid=10695
4: http://www.lacie.com/nl/products/product.htm?pid=10811 (only a Dutch link, I'm sorry)
Hope you're able to help because your help is fabulous so far!
Message was edited by: FiveMenM -
I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?
If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.
-
Can´t upgrade to mountain Lion because says that my HD is only for Time Machine use
Can´t upgrade to mountain Lion because says that my HD is only for Time Machine use, what can I do?
The installer is probably finding a file called backups.backupdb
That is where Time Machine stores it backups so it figures it can't install there
The Time Machine backup should never be done to the system drive but another drive instead
Allan -
The iphoto on my macbook isn't responding. I click on the app but once it opens it starts to load and thats all it does. The wheel continues to spins. any one have any suggestion on how to fix the problem? i'd appreciate the help =]
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Hi, the App Store icon has been removed from my iPad even after synching and updating. Any suggestions on how to get it back to be able to update / purchase apps?
If you do not have, or remember, the passcode for Restrictions, the only option available to you is to reset the device to factory settings via itunes.
-
When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?
I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck. -
Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?
Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT -
I attempted to install the iOS 5 software onto my iPhone 4 several times a few months ago. Each time the download timed out at about 3.75 hours. Any suggestions on how to complete the update?
See... Updating to iOS 5
http://support.apple.com/kb/HT4972
If you are using windows...
Temporarily disable your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
The dates my photos were taken are not incorrect. Any suggestions on how to get the correct dates back?
Thank you Winston. This works and I can adjust several photos at the same time.
-
I suddenly can't receive emails from senders at a particular domain. They can receive emails from me. I haven't blocked them. Any suggestions on how to 'reopen the line' will be appreciated, thanks.
Contact iCloud support. Apple's spam filters may have detected spam coming from users on that domain and blocked all email from it.
-
My music files etc were all located on my old laptop which was stolen. I have just plugged my iphone in to my new computer and it has deleted all my files. Has anybody got any ideas on how to retrieve the files?
WINDOWS?
Connect the iPod to your PC. If iTunes starts syncing (ie erasing) your music automatically, hit the X in the upper right hand corner of iTunes display, to the left of the search box, to stop it.
In Control Panel, Portable Media Devices, double-click your iPod.
In the Tools menu -> Options, in the View Tab, check "Show hidden files and folders."
Navigate to the Music folder. On my 'pod, the full path is
Portable Media Devices\NAME of IPOD (F:)\iPod_Control\Music
Select all the music folders, and drag and drop them into a folder on your hard drive, or directly into iTunes.
And you're done! The iPod music folder structure is strange and inexplicable, but once you move your files into iTunes you can set it to automatically organize your folder by artist and album to clean that up. (To do this, in iTunes Edit menu, choose Preferences and in the Advanced tab, check "Keep iTunes Music Folder organized."
might be out of date worth a try -
Can I use an external drive for Time Machine and storing other data?
At the moment I have one external drive, a 500gb LaCie. My internal drive is 160gb. I don't think I'll be using all 500 of those gigabytes for a while, so I want to put them to good use. Can I make a partition on this drive and use that for Time Machine, leaving the rest of the drive for my documents and other files? If so, how would I partition the drive? I'm not fluent in Disk Utility and even though I'm pretty sure I know how to do it, I don't want to screw up. Also, how big a partition would you recommend?
While we're here, I have a second question, somewhat relevant to the first. Could I move my Time Machine backups to a second drive if I wanted to? Also, if I used a big drive (say 1tb) could I use Time Machine to backup my current LaCie to a partition on that drive? Thanks in advance.videoCWK wrote:
Does that also mean that I could back them both up on a very big drive?
Yes. Time Machine will, by default, back up all of your external drives unless you specifically exclude them.
Also, will Time Machine backups eat all my space after a lot of usage?
It depends on what you do on your Mac. If you work often with very large files (video editing, heavy photo editing, big disk images, Microsoft Entourage data file, Parallels disk image file, etc) then your backup drive could fill up very quickly.
I use my Mac mostly for e-mail, web browsing, iTunes, iPhoto, and the occasional iMovie project. I have 92 GB on my main hard drive (60 GB of which are my iTunes and iPhoto libraries, and one iMovie project.) My Time Machine backups consume 155GB on my backup drive, and that's after using Time Machine for a full year. -
I have a Seagate FreeAgent GoFlex 1TB USB 3.0 external hard drive that I currently use just for Time Machine backups. Is it possible for me to go into Disk Utility and create a new partition on the drive so that I may install Windows 7 via Boot Camp? Or since I am already using it for Time Machine do I have to keep it only for Time Machine?
You must install Boot Camp in your internal drive because Windows can't be installed in an external disk and Boot Camp can't do that
Maybe you are looking for
-
11 Nice Features with New Awesome & easy Magnetic Pen Tool (Updated)
1. Scale effects during the scaling object, in the control bar there is more space (Empty) that will be the helpful to show you the example of the picture that I have made myself, when you transform any object, you will see these options in the
-
How can execute a jar application
Hello there, I am facing problem with executing jar application. How can I execute a jar application using java program. Thanks & Regards
-
How to use the Class.getMethod(String name, Class[] paramArrays)
Hi, I've a problem with the .getMethod method. I've search solutions in the tutorials but I haven't found sorry. I'm trying to copy a method from a Class named carre in a reference named m. But I don't understand the second part of the parameters. Ho
-
Hi I would like to implement a size of method in Java. I know it is impossible but I also know that there are turn arounds to the problem using methods such as gc and serialization which give satiffactory results. In my case acurracy is not of utmost
-
My New domain controller wont see the pdc
hi, i have a windows 2003 pdc that is the only one on the network, previous IT people did not have a BDC or system back up. Now the current domain controller is giving trouble, i tried to install a secondary 2003 domain controller (BDC) but it dose n