I used the compatibility button with IE and our company program. I can't get the company program to work using Firefox. How do I make compatiable?

With IE and my company program access, I used the compatibility button so it would work. I can't find a solution with Firefox to utilize my company program. I tried Shift Control R and Shift reload. But to no avail. I really need to use my company program to access account info and I am not wanting to resort back to using IE as my internet browser. Please help.

As you have discovered, Firefox does not have a feature similar to IE's compatibility mode where non-standards-compliant pages designed for older versions of IE can run in newer versions of IE.
The solution really depends on what is wrong with those pages. Does your IT support Firefox and/or are they willing to make fixes?
Note that you can use different browsers for different sites. If you need IE for internal sites, that doesn't mean you can't use Firefox for your regular browsing. You wouldn't be the only person in this thread doing that. ;-)

Similar Messages

  • I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

    I have two Apple IDs - one associated with iPad and iPhone and the other associated with iMac and MacAir. I am going to lose the former e-mail address imminently and would like to associate all devices with just one ID. How do I do this? Thanks

    Thanks - I guess it is like there were two of me!
    I bought the iPhone first and it seemed natural to link it to the (work) e-mail address which was in constant use. The iMac for home use came next and it seemed natural to use my home e-mail address, particularly as I knew by then that I would lose the work address after my imminent retirement. The same logic went for the recent puchase of the MacAir. I am not sure what happened with the iPad (also a recent purchase) - iTunes seemed to puch me towards the same ID as the iPhone.
    It is not a huge problem - just makes my persona look schizoid! Otherwise very happy with everything Apple.

  • TS3988 I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have  check the settings on both devices and they seem

    I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have  check the settings on both devices and they seem to be t

    There are only two things that you must do to connect a device to calendars:
    1)  In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
    2)  Turn on calendars on the same page.
    You said that the iphone 4 and ipad **used** to automatically sync.  Do they no long sync?

  • When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
    Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

  • The new ibook app and ibook update is designed for iPhone 5 operating system.   When my iPhone4 recently updated the ibook app, it created many problems using the ibook to download and read my books.    Can I get the previous ibook app back on my phone.

    The new ibook app and ibook update is designed for iPhone 5 operating system.   When my iPhone4 recently updated the ibook app, it created many problems using the ibook to download and read my books.    Can I get the previous ibook app back on my phone.

    Check your trash can on the desktop. The old version is automatically moved to the trashcan. You should be able to move it from the trashcan back to the Apps folder within the iTunes folder. The update that was pushed out was for iBooks to work with iOS 7 not iPhone 5. iOS 7 was released today.

  • I am trying to use my account with a new computer.  Now we can't get the new music to download on the IPod.  Any help/

    I am trying to use my I Tunes account with a new computer.  Now we can't get the new music we bought to sync with the Nano.  Any ideas?

    Downloading past purchases
    http://support.apple.com/kb/HT2519
    Recovering iTunes library from your device.
    https://discussions.apple.com/docs/DOC-3991

  • Hello, trying to download the latest iTunes software version, a pop up comes with a "invalid signature" message. Try to do download only with the same results. I can buy and download from iTunes but can't  get the latest version?

    Hello, trying to download the latest iTunes software version, a pop up comes with a "invalid signature" message. Try to do download only with the same results. I can buy and download from iTunes but can't  get the latest version?

    Transfer Purchases  = iTunes > File > Transfer Purchases
    http://support.apple.com/kb/HT1848

  • Hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the

    hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help

    What I am saying is ..........
    The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
    The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship  with the Carrier and then follow the Carrier's process to unlock
    With a PAYG it usually means adding a specified (by the carrier ) amount  usually £15 /£20 depending on the carrier
    This is how O2 function and according to Gemma  this is how Vodafone work

  • I want to store movies on an SD disk, watch them on the way to Europe, then use the chip to record photos in my camera.  I can't get the iPad mini to recognize the videos I've recorded.

    I want to store movies on an SD disk, watch them on the way to Europe, then use the chip to record photos in my camera.  I can't get the iPad mini to recognize the videos I've recorded.

    I'm a bit lost - you first say
    "The only file(s) I can sometimes get it to recognize are the ones shot with a camera onto an SD card"
    then you say
    " If I take an unused SD card and record video with my camera, it will see, and import the file to the Photo app."
    In the first statement, aren't you using an SD card in the camera?  And what do you mean by "unused SD card"?    Cameras put their files in specific folders on a card, and your device only reads photos and video from those folders, not from anywhere else on the card.

  • I think I goofed when running disk utility, and unmounted at the end and restarted. Now I can't get the disk to mount. What am I missing?

    I think I goofed when running disk utility, and unmounted at the end and restarted. Now I can't get the disk to mount. What am I missing?

    Which disk won't mount? What version of OS X? Your post is impossible to answer with no useful information.

  • On boot up, just white screen with logo and windmill.  Forever! Can't get out.

    On boot up, just white screen with logo and windmill.  Forever! Can't get out.

    Backup in case your disk is failing.  (Post back if you need instructions on how to do that w/o booting OS X.)
    Start up in Safe Mode;  http://support.apple.com/kb/PH14204?viewlocale=en_US
    If it boots reliably in Safe Mode then it is probably a software issue.  Post back for more instructions.
    Reset PRAM: http://support.apple.com/kb/PH4405
    Boot in Recovery Mode.  (Hold down the Command (⌘) and R keys as your computer restarts.)  Run Disk Utility.  Click on the upper left system disk icon.  Does S.M.A.R.T. report “Verified”?  If not the disk is failing and will need to be replaced.  Click on the icon underneath and indented to the right, usually called “Macintosh HD”.  Repair Disk.  It should finish normally with a green OK message.  If it does not try to repair it again. 
    If it will not finish with the green OK message then use Disk Utility to erase the drive and then reinstall OS X.  (Be sure you have a backup before erasing the disk.  Post back if you need instructions on how to do that.)
    If it repaired all errors and is still not booting normally, reinstall OS X.
    If it is still sick after all these steps then the disk probably needs to be replaced or it could be a disk cable.  You replace these inexpensively and fairly easily yourself or take it to an Apple store for them to do it for you at a higher cost.  If it is still under warranty or AppleCare have Apple do it for you for free.  You may want to have Apple check the health of the system and disk before repairing it yourself.  Post back if you need instructions on replacing the disk and/or testing the disk cable. 

  • I am trying to set up a co-worker's email on her iPhone and I don't know what her password for Thunderbird is and neither does she. Can I get the password?

    I am trying to set up a co-worker's email on her iPhone and I don't know what her password for Thunderbird is and neither does she. Can I get the password somehow, or what do you recommend?

    There is no password to Thunderbird. The password you need is to the email account. Contact the email provider for password reset.

  • Can I get a stepper motor to work useing an AO channel on a DAQ card?

    Can I get a stepper motor to work useing an AO channel on a DAQ card? I know its a very low currentl coming out, but what Im going to be using the motor for is very weak. Has anyone tried this before? I certinaly dont want to spend 2,000+ on somthing that will be basicly moving a string on some pullys back and forth.
    Thanks,
    -Mark

    Greetings, Mark
    You can certainly use the A0 as a driving signal, but you need to amplify the current considerably to run a stepper motor. Additionally, most stepper motors require multiple phase driving signals to work properly. If I understand your application, I believe a stepper motor is a bit of overkill...you only want to use them when precise positioning and repeatability is an issue. You might look at some of the linear actuators available.
    Eric
    Eric P. Nichols
    P.O. Box 56235
    North Pole, AK 99705

  • I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

    I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling.  I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working.  I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem. 
    My network consists of 4  base stations set up in a roaming network - same network name and passwords.  I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn.  The network works pretty well since I went to a roaming set up.  Good performance, yata, yata, yata.
    However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address.  When the AEBS is set to  bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding. 
    I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS.  I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS.  In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding.  However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode. 
    I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope.  What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
    I'd appreciate any insight into this that anyone might have.  I've hit the wall with what I know.
    Thanks.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • In the topmost Firefox menu with File,Edit,View,History,Bookmarks, I can not get the list of bookmarks to display as they did before. The Bookmarks menu does not open up into the list of bookmarks.

    I am running Mac os 10.6.8 and Firefox 6.0.1 on a MacBook Pro and on a desktop Macintosh.
    The large computer displays a list of bookmarks when you click on the uppermost Bookmarks menu.
    The MacBook Pro displays the following when you click on the Bookmarks word in the top menu:
    "Show all Bookmarks, Bookmark this Page, Bookmark all Tabs and an icon with a blue dot next to Bookmarks Toolbar with an arrow to the right and below that it says Unsorted Bookmarks.
    There is no display of the list of bookmarks from which I can chose as I do on the larger desktop macintosh computer.
    How can I get the list of bookmarks to show as a list when I click the Bookmarks menu?

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    You can also try to move (delete) the Firefox plist file.<br />
    See [http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results]
    Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).

Maybe you are looking for