I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated
I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated
Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al
Similar Messages
-
Just purchased this product, verified my email, payment taken etc., etc., but keep getting a message when trying to convert a doc saying an error occured when signing in. I have siged out and signed in again - no avail. Any help would be much appreciated. Thanks
Hi there Katie,
I just checked your account, and see that it's active. Are you trying to sign in via Adobe Reader? If so, please choose Help > Check for Updates in Reader and make sure that it-s up-to-date. The most current version, 11.0.07, should alleviate that sign-in error.
Best,
Sara -
Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I have just had a system update. Safari 5.1.7, a security update 2012-200 and Remote app update and now when I go into a site with flash it says I do not have adobe flash. I have installed it from the site but still no luck? any help would be much appreciated Cheers Dave
Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
iPhotoPhotocast
Java
QuickTime
WebKit built-in PDF -
I have deleted photos from iPhoto trash but apparently still have 82GB of photos which I cannot see or delete - any help would be much appreciated
check the overall trash on the 'dock'.when files are deleted from programmes, they always go to the general 'Trash' as general files and you will need to delete form there as well. if there is still a lot of missing files taking up space try reloading or deleting 'Iphoto' and uploading again.
-
Message - There was a problem connecting to the server “sdbc.corp” it just started showing up and I can't get rid of it! MAC OS x v.10.9.2 - Help!
not sure why it would keep trying to connect.
First I'd look in Finder on the "Go" menu up top as "Connect to Server" and see if Rick-Pc was listed in there and remove it from the list. -
Can anyone explain what I need to do. I am buying a new computer, need to de-authorise my old computer and then put the library on a new windows computer. I have my library backed up to the cloud for which I pay extra. I am not at all technical so if anyone could give me idiot instructions I would much appreciate it. Finding the instructions from apple assume I know basic,s and that confuses me!
Hey Dollydayle,
The steps in this link can help you with moving your music to your new computer, with several options you can choose from that best suit your needs:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Welcome to Apple Support Communities!
All the best,
Delgadoh -
Forgot, it's an ipad 3rd gen wifi.
Ok guys, made an appointment at the Apple store to go in and see what's up but I never made. My daughter asked if I did a hard reset and I wasn't sure what that was. So she held down the power button and home screen button at the same time until it rebooted. Problem solved! Now videos play on the video tube app and on youtube.com. Wow easy fix and Im happy.
-
Could anybody offer me advice on what I can do to reinstall mountain lion on my daughters imac as my ex wiped the whole computer via find my iphone and will not give me the 4 digit passcode ? Any help and advice would be greatly appreciated..
Take it to an Apple Store, have proof of purchase with you.
-
and when in the time line there is audio but txt saying "unrendered", new to this programme and any help would be much appreciated.
Any time Final Cut Express must perform more calculations than your computer can handle in real time, you need to render. Rendering is the process of creating temporary video and audio render files for segments of your sequence that Final Cut Express cannot play in real time. When you render a segment of your sequence, Final Cut Express substitutes a render file for the segment during playback. Render status bars above the ruler in the Timeline indicate which sections can play back in real time and which segments require rendering. To render just click on the sequence menu and select render selection then click both.
-
Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML
Thank you for this, and to Caleb.
I've tried using Caleb's approach (which is the same as I used with Lion), but the programme doesn't respond now that I have installed Mountain Lion.
My problem is that I do not want to use IE7 but that a programme I need regular access to will only allow IE7 and I've been told by the developers that it is too expensive to upgrade this programme to allow it to be used by other browsers.
So, my puzzle remains the same. I could access IE7 and use the programme using Caleb's solution with Lion. I can't do the same with Mountain Lion. I do (I think!) understand your point about the programme requiring IE7 specifically, but if it worked on Lion, why isn't it working on Mountain Lion? Or was I just lucky before?
I'll try mende1's approach, though I doubt I'm technical enough to virtualise anything!
Thanks again. Any further thoughts welcome. -
I entered my debit card for a app latter when I went to update all it asked password as usual then said sign in required took me to page sayin my card has been declined use alternate I don't have alternate but now it won't let me download free apps niether
Do you have enough funds in your bank account?
otherwise iTunes sometimes black lists card if there are too many fradulent purchases
Reason why they might black list a card is possibly you call in for alot of fradulent purchases
One more reason can be because iTunes does actually limit the amount you can change payment methods
Call AppleCare Phone support and have your call directed to iTunes Store
1-800-275-2273 -
i have tried to update my software but it keeps saying i need the os x 10.5, i downloaded it but it gives me a prompt when i try to click on it saying that my software needs to be updated to 10.5, what do i do?
Hi, and welcome to Apple Support Communities.
Mac OS X 10.5 is not a free download. You have to buy it.
http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC
Not all iBooks are compatible with Mac OS X 10.5. Check out the system requirements here:
http://support.apple.com/kb/HT3759?viewlocale=en_US
Good luck. -
I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them so i can upload them to youtube but it won't let me import them, even after changeing them to MP4 format, it just comes up with the message: "No Importable Files None of the selected files or folders can be imported. Change the selection and try again."
Ive even tried opening in itunes and copying from thier but they wont open in Itunes, no message or anything they simple just dont open. its strange because it does open in quicktime player.
please if anyone has any ideas that can help me please let me know XD thanks.First problem: You're fine. The hotter it gets, the more the fans spin up. The computer is designed so that at max load, at max fan speed, it won't overheat (unless it's obstructed by something, e.g. sitting on your bed swallowed by a comforter). It's not the best thing to keep it that toasty for days at a time, but a couple hours at a time shouldn't be a problem.
Second problem: If something in the trash won't delete, just use Secure Empty Trash and it should be fine. Since .torrent files are quite small, it should only take a couple seconds. -
So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?
If you're on windows try the following:
This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
1. Quit itunes
2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
4. press ENTER
5. Reboot your machine
6. Restart itunes & connect device to sync
7. Good luck
Maybe you are looking for
-
ITunes Will Not Open and I have Tried Everything Posted...
Please Help! I have downloaded the latest version, deleted it and tried again. I have deleted folders, turned off my Norton protection and still no go. Can anyone here help me from this 7 hour nightmare? I had an iPod and iTunes on this computer befo
-
Strange ARP Problems with C170 and AsyncOS 9
after upgrading to asyncOS 9.0 (Ironport C170) we have the following problem. For better understanding a short explanation (without all network devices) The traffic flow is Lan --- Application Firewall ---Ironport During a connection between the Fir
-
Reading external xml files from a jar
Hi, I am trying to read an xml file from a jar (which is not present inside the jar ) . I am passing the file name as a string (like C:/folder/filename) to the SAXBuilder but it throwing unknown protocol: c error. i tried using an url , tried using a
-
Adapters not showing in Adapter monitorin
Dear Collegues, we have upgraded from SP14 to Sp17 for our XI. Unfortunately, we were unable to view the adapters provided by SAP in Runtime work bench. PATh RWB:->Component Monitoring->Adapter Monitoring->List of Adapters . Can anyone
-
How can I use "IN" in evaluete variable?
Hello! I'm trying to use the evaluete variable in a ODI package. I choice IN in the evaluete but what his the syntaxt for put a list of parameter? I tryed IN then I write ('A','B') or (A,B). what can I do? Thanks in advance Bye