I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browse
I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browser/content/browser.xul Line Number 1, column 8702:....................."
I did evrey thing, but the same problem
reinstall SpeedBit, reinstall Mozilla Firefox.
So what can I do!
== This happened ==
Every time Firefox opened
== 4 days ago
look people, i may have a solution for this. This happened to me a few times before and resolved alone, but last time it happened was when i turned off my router and back on while my comp was running and appeared when i tried opening firefox after that. so wat i did was i shutdown the computer and the router and tried turning both on again, and it resolved.
Therefore, Summary: Shutdown computer then turnoff router then turn both back on
Hope this helps anyone.
Similar Messages
-
I've just tried to open Auroara and am only getting a small window stating...
XML Parsing Error: undefined entity
Location: chrome://browser/content/browser.xul
Line Number 540, Column 9: <button default="true"Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Since an automatic update ran I get the message <br />
"XML Parsing Error: undefined entity <br />
Location:chrome://browser/content/browser.xul <br />
Line Number 238, Column 5: <br />
<broadcaster id="devtoolsMenuBroadcaster_ChromeDebugger"----^"<br />
when I try to open Firefox. I have had to go back to using Internet Explorer - Tried everything suggested including deleting then reinstalling Firefox, but still cannot get Firefox to open - help!Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default (your profile folder with bookmarks etc. WILL NOT BE DELETED):
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you. -
Videos won't play in Safari. Notice says, "You need to upgrade your Adobe Flash Player to watch this video." I have downloaded it, but no change. All videos play OK in Firefox, but I like the controls in Safari better and want to stay with it.
Try deleting Flash cookies.
Flush.app – Flash Cookie Removal Tool For OS X | MacHacks.TV
If that doesn't help, UNinstall the old Flash plugin first, then reinstall new.
Troubleshoot Flash Player | Mac OS
Then restart your Mac. -
Using Sothink video downloader, normally by default my video files are save in FLV extension. Now for whatever reason suddenly my video files are save in .ebm extension & I can't open my video file. "Save file Type As" -to select file extension does not seem to work -
It's a WEBM video file. My solution was to rename the file to have .webm extension, and play it with the latest VLC Player (2.1, but I think any from 1.1 and upper will solve it too). Just associate .ebm with VLC didn't work. I had to rename the files so VLC knew exactly what that thing was.
By the way, it worked the same way with a .eam file (!), I just renamed the extension to .webm. -
Panasonic camcorder HDC-TM90 any experience using Pavtube Video Converter with Final Cut Pro X
Does anyone have any experience using Pavtube Video Converter with Final Cut Pro X for Panasonic camcorder HDC-TM90 shooting in 1080 P 60 ( mts file extension)
Don't use these generic offbrand converters to get footage into FCP X. they re-encode your video and cause loss of quality. If FCP X cannot import your video then use a utility that simply re-wraps it into a quicktime file with no transcoding or loss. I prefer Clipwrap which works great and is updated frequently but there are free alternatives like Media Converter or Rewrap.
But version 10.04 of FCP X should import it directly from camera as long as the folder structure is complete and you are not trying to merely import it from single mts files. -
I want to use a video projector with powerpoint can I use my mac to drive it- and what about sound?
I want to use a video projector with powerpoint can I use my mac to drive it- and what about sound?
Hi Scott,
You should be able to. If the projector has a speaker with acceptable sound, that's one option, otherwise powered speakers or a surround system.
What connections does the projector have?
Exactly which MBP do you have? -
imovie: I have just downloaded 'mavericks' and have installed all updates. I get an error message:Your computer’s video card does not meet the minimum system requirements. What to do? Thanks for any help in advance.
I am not 100% sure this is the issue, but I saw a different thread about the ATI Radeon HD 2600 not being OpenCL compatible for another program and that a newer compatible graphics card would be required to solve the problem. I am getting the same message with my 2007 iMac 24".
-
The error message come up on the itune screen to restore the phone but it can not be restored. Now I want just the phone to be on so I can use it!!!!
Hey!
I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
SIGHHH. -
My iphone says "theres a billing problem with a previous purchase please go to purchase history to correct the problem" but when i go to it nothing happens and is not telling me nothing Now i cant download no apps
You can contact the iTunes Store Customer Service department at no charge using the form on their Support page (select the category and subcategory closest to the issue you're reporting and you'll find an "Email Us" button) and explain your problem to them.
Copied from Varjak Paw in :https://discussions.apple.com/thread/2598671 -
I have treated photos in final cut using effects. The problem is I can not export them. Please help me. Thank you-
Ernest,
This is how I do it: With all the video & still's in the time line, I click on each (even if I have to use the command key and click on each file). When each file is active I go under SHARE- go to EXPORT MEDIA- I use the Apple Pro Res codec 4:2:2. If you do not click on each file in the time line it will not be exported out.
Hope this helps. -
I just bought a 2009 macbook pro with an os upgrade to lion. my question is how do i change the previous owners name (like when i bluetooth) to my name???
Your MBP should have been given to you with the original installation disks and OS. The Lion OS is licensed to the person who sold it to you. You will have create your own account and purchase Lion if you wish to use it. Those are the stipulations in the licensing agreements.
Ciao. -
Problems with Syncing iPhone 3G (4.2.1. iOS). What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up. I noticed that my name has been replaced to "untitled playlist". Whats wrong
Welcome to Apple Discussions!
Maybe a long shot, but WD is not known for the quality of some of their enclosures, although I do like the drives themselves. It may be worth mounting this drive in a different enclosure, something like one of OWC's FireWire enclosures with the highly reliable Oxford chip sets. I wouldn't be inclined to trust a WD enclosure, especially if it already seemed to be acting in a flakey manner.
Here's an example of what I mean:
http://eshop.macsales.com/item/Other%20World%20Computing/MEP924FW8E2O/
I have 3 of these and I really like them.
From what I understand, if the drive spins up, it is often possible to recover data from it. To be absolutely certain to destroy the data, you just about have to take a hammer to the disk. Hopefully, there will be a way to get your data back.
Good luck! -
I am getting followong error
XML Parsing Error: undefined entity
Location: chrome://weave/content/options.xul
Line Number 6, Column 3: <setting id="weave-account" type="string" title="&account.label;" />
--^I had this problem - it appeared to be due to having Firefox 4 with the Firefox Sync installed as an add-on. Firefox 4 has sync included so there is no need to have it as an add-on. I went to the add-on manager and removed Firefox Sync and now appears to be working correctly.
-
I'm having trouble adding an additional account to FireFTP. I keep getting a yellow box with this title:
XML Parsing Error: undefined entity
Location: chrome://fireftp/content/accountManager.xul
Line Number 216, Column 17:
<menu label="&charsetMenuMore1.label;" accesskey="&charsetMenuMore1.accesskey;" datasources="rdf:charset-menu" ref="NC:BrowserMore1CharsetMenuRoot">
----------------^
Don't understand the problem, can anyone help please?Try updating FireFTP to the latest 2.0.20 version.
''An update for Firefox 32 compatibility.''
https://addons.mozilla.org/en-US/firefox/addon/fireftp/
Maybe you are looking for
-
ABAP Routine in selection of Info package in 3x
Hello Experts We need to load distinct PO data in 3x server. I have added this distinct po values in range table of info package abap routine. However its not loading for range table values more than two selections/pos. If I try to append more than 2
-
Replacing of the pricing procedure by a different pricing procedure .
Hi We are process of changing the pricing procedure of the particular sales process. In case of old open sales order after changing pricing procedure if i update it in VA02 mode then also ...it is not picking the current sales order ... Again in cas
-
How to identify the physical IP address of AIX server on RAC Oracle 10g
Hi All, Could you please help someone to identify the physical IP address of IBM AIX on RAC db. I have access to the database and I don't know whether the hostname mentioned in the tnsnames.ora file is virtual or physical ip adress . Is there any com
-
How can I get my speaker fixed I cant hear only when I use my ear phones
-
Topics in FI/Assets management
Hi ,I am Alnoor Abvani, just completed my masters in Accounting and would like to continue with SAP FI/Asset Managemnet. please let me how to go about it. I am trying hard to get an entry level jobs and also trying to learn online. can any one help w