I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

  • TS3406 magic jack is not working properly. I can call out and hear the person i have called, but they can't hear me.

    My Magic Jack is not working properly. I can make a call and the person I have called can hear me but I can't hear them. What can I do to fix this?

    if it play not sound at all then it's likely the hardware issue where the headset detector gets stuck
    like this the detector just is stuck in the opposite way
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more
    iphone stuck in headphone mode

  • My idvd wont play sound in some parts of my i movie project, even though i can hear the sound in imovie. dont get it??? and at the end of my i movie i added pictures with music. it appears as tough there is some kind of ripple effect when i play in idvd??

    my idvd wont play sound in some parts of my i movie project, even though i can hear the sound in imovie. dont get it??? and at the end of my i movie i added pictures with music. it appears as tough there is some kind of ripple effect when i play in idvd??? i dont know why, i did not add anty effect.

    any suggestions

  • Upper headset jack does not work

    My h8-1039 desktop (W7 Home Premium) has a headphone and microphone jack on the top and back of the PC.  On the top set of jacks, the headphones stopped workng but the microphone still does, so I have to use the headset to speak but isten through the speakers.  The rear set could be used, but very inconvenient as you can imagine.  Is there a way to determine why the upper headset jack doesn't work?
    Thanks,
    Mike
    This question was solved.
    View Solution.

    Hi,
    The headphone and mic jacks located on the valet tray are wired to the mainboard.
    I would guess either the headphone jack wire has dislodged at either connection point, or the headphone jack has failed, or the motherboard connection has failed.
    Have you tested the headset to verify it is operational?
    Have you checked Realtek Audio to eliminate software settings as the cause?
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
    HP Products:
    810-150se Desktop
    17t-j000 Notebook
    H8 1380t CTO Desktop
    560z Desktop
    Errare humanum est.

  • The system Pages library and its RSS feed do not work properly in SharePoint 2010

    This question is about RSS feed for the system 'Pages' library in SharePoint 2010.
    Now there are 5 'News' pages in the system 'Pages' library. In each news page there is one field called 'Title' for the news title. One of the news page is named 'FileNamePage5.aspx', and the news title is 'This is the title of page5'.
    I have enabled RSS in Site Settings, and configured RSS Settings for the 'Pages' library from the Communications section via Document Library Settings. I selected a few columns to display in the RSS description, including the 'Title' column. In the RSS feed
    (XML file) of the system 'Pages' library, I checked the XML source code, and found the news page file name appearing in the <title> tag below within the feed (XML source code).
     <title>FileNamePage5</title>
    and the original news title 'This is the title of page5' was appearing in the <description> tag in the feed (XML sorce code)
     <description><![CDATA[<div> ... This is the title of page5... </div>]]></description>.
    This would make it hard to extract ONLY the original news title (This is the title of page5) out of the feed via XSLT, because the data within the <description> tag in the feed also contains data from all other selected columns defined via the RSS
    Setting. If I did not select the 'Title' column via RSS Setting above, I even could not find the orinigal news title in the RSS feed.
    This is happening for all other news pages in the system 'Pages' library. Is this what SharePoint 2010 normally does? or is something wrong with the settings for site or the system 'Pages' library?
    How to display ONLY the original news title (This is the title of page5) in the <title> tag in the RSS feed. Please Help me to resolve this issue.
    谢亚军@Sydney

    Hi,
    According to your description, my understanding is that you want to display the value in Title column of Pages library in title tag in RSS Feed in SharePoint.
    I tested the same scenario per your post, the title tag in RSS Feed displayed the value of Name column in libraries and displayed the value of Title column in lists.
    It is by design and there is no OOB way to change the default column mapping in RSS Feed.
    I recommend to customize your own RSS Feed style sheet to make the title displays the value of Title column in SharePoint libraries.
    Here is a link about customizing the RSS Feed for document library for you to take a look:
    http://markeev.com/Articles/sharepoint-blog-rss.aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • IPhone 6 camera on lock screen not working properly

    When I drag up the camera icon on the lock screen I can see the camera app for a split sec but then the screen goes black.
    While in this screen I can still make pictures by vaguely pressing where the white button should be or using the volume buttons.
    It also doesnt work if I first drag up the 'settings menu' and access the camera from there, but when out of the lock screen everything works perfectly fine.
    Is there anyway I can try to reinstall iOS, or anything that might work? Sounds like a software problem to me.

    Press and hold both the home button and the lock button (sleep/wake button) until you see the apple logo. This performs a restart and does not delete any data.
    I hope this solves your problem.
    Austin

  • My phone is not working properly and i have applied for it to be fixed. i was told a box would arrive for me to send it manufacturer but no box as of yet and i dont know how to access the tracking. i have the info just dont know where to put it??

    please contact me if you know how i can see where the box is and the phone (when i send it off) i have the case id and carrier tracking number but dont know where to access it ? assuming its a simple answer?

    Hello jesswrenn
    There are a few options to look that up. Check out the links below to look up the status of your repair.
    Check Your Service and Support Coverage
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    Look Up a Repair
    https://selfsolve.apple.com/repairstatus/main.do
    Regards,
    -Norm G.

  • My earpiece jack is not working properly

    I'm having problem with my earpiece jack. The sounds kept chocking up and I no voice is coming from the left side of the earpiece and this started when I plugged in my Ipod with an output speaker. It went off and I have to restart it before it start working again
    Meanwhile, the earpiece works perfectly on other Ipods and I have tried to diagnosed it but its still the same. The speaker works fine when earphone isnt connected to it
    Please let me know what to do.
    Thanks

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • My iPhone 6 plus screen orientation is not working properly

    I Bought my iPhone 6 plus 64GB on launch day and I haven't really had any problems, until a few days ago... My screen orientation will randomly flip upside down from the Touch ID home button. It it will be horizontal when I'm holding my device verticle, if I turn on the orientation lock the screen will return to normal but that's a temporary fix. I'm pretty sure this is a hardware problem, but I'm not positive. Is there a way to fix this?

    Try hard resetting your phone:
    Hold down the power and home buttons simultaneously until the screen turns off, then let go. Then press the power button to turn the phone back on. If that doesn't work, you may have to take your phone in to an Apple Store. Given the fact that you just purchased it, you will most likely get a replacement phone free of charge.
    In the case that you decide to bring your iPhone in, make sure to create a backup first.
    See these articles for more information:
    Turn your iOS device off and on (restart) and reset
    Back up and restore your iOS device with iCloud or iTunes
    Wishing you the best of luck.

  • Airdrop not working properly between iphone 6plus & mbpr

    Airdrop between my mbpr 2014 model running OS X Yosemite and my iphone 6plus running iOS 8, is not working properly, sometimes it works sometimes it doesn't. I have tried different wifi networks and it's always a struggle getting it to work. Even just between 2 is devices, my iphone and iPad i still can't get it to work. What could be the problem?

    Sign out of iCloud on both devices and then sign into iCloud first on the Mac then the iPhone.

  • My iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging as well, bit confusing

    my iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging when i connected to the laptop as well, bit confusing, help please

    Take a look at this link, http://support.apple.com/kb/TS1538

  • I've bought a iphone 5c from USA but the headset is not working properly its still in warranty,can i go for replacement of headset??

    I've bought a iphone 5c from USA but the headset is not working properly its still in warranty,can i go for replacement of headset??

    Since it is only the headset that is the problem and not the iPhone it would be better to just buy a new set and not let yourself be frustrated over it.  If you send anything to your sister before the one-year warranty is over, include the headset so she can exchange it at an Apple store.

  • I have never dropped my iPhone and when I try to take a video on my phone there is no sound and if I send it to someone they can't hear it either I don't know what the problem Is but will apple replace that? Or will it cost some money to fix it?

    I have never dropped my iPhone before and when I take a video and or send it to a friend they can't hear it and either can I. I was wondering if apple would replace it by sending me a new iPhone or if it would cost money to fix?

    You can message them in the chat click on this link http://store.apple.com/us/search/chat-support then click on Chat Now next to the blue bubble

  • The sound on my ipod isn't right anymore. I can hear the beat of the music, but very little of the singing. Any advice?

    Hi - I have a 7 year old beloved ipod mini. Yesterday the music stopped working out of the blue. I can hear the instruments, and some singing, but not the background singers. I've tried re-setting the mini and I've tried switching headphones. Any advice?

    Make sure it the Equalizer setting did not get set to some odd setting.  From the main iPod screen, select Settings.  Look for an EQ setting, and set it to OFF.
    If that does not help, at the bottom of the Settings screen, there is an option to Reset All Settings.  Try doing that, which resets the iPod to all default settings.
    If that does not help, you should do a Restore on the iPod in iTunes.  Select the iPod in the iTunes sidebar, under DEVICES.  Over to the right, on the Summary tab, there is a button to do a Restore.  This will erase the iPod, re-install the software, and set it to default settings.

  • Very low sound volume on Portege R500

    The sound volume on my R500 (R500-11c to be exact) is ridiculously low. Only with volume maxed out (100) and using headphones do I hear anything at all, and even then it's way too low to be useful. I can just make out the test sounds in the left and then right earphone when using the test sound found at Control Panel -> Sound -> Speakers (there are no Headphones to be selected) -> Properties -> Advanced -> Test. Unplugging the headphones I hear nothing from the speakers, due to the (very low) sounds made by the fan and HDD. Playing music (with headphones) I can just make out that sounds are being produced, but I can't even make out what is playing.
    I've tested the things mentioned in the "Satellite 5105-S901 Sound is very low (even on max volume) using supplied Toshiba driver" thread with no success (including Loudness Equalization).
    I'm running Vista Business 32bit, and have tried the driver_audio_realtek26117B.exe, driver_audio_realtek_TC00157600B.exe, and Vista_Win7_R243_x86.exe driver files, and also used the util_mute_off_25847B.exe utility.
    Enabling mute makes the already faint sounds go completely silent, so I don't think it's a mute issue.
    Jack detection does work, I can see that in the Realtek HD Audio Manager program. Using that program's sound test (Speaker Configuration) I have to go to a completely silent room, and even then I only hear something in the right earphone. (I think; it's so darn low I could be imagining I hear it.)
    Decreasing the sound volume slider from 100 does make the almost inaudible sound even harder to even notice, and at around 45 it is no longer audible even in a quiet room with headphones.
    So it seems that I somehow need to reset the audio chip to "normal" level. Or it is broken and can't output anything more audible.
    Does anyone have any ideas what I can try next? I can boot to XP or Linux if anyone has any ideas on how to get sound there, just to get started. (They're silent as well, I haven't done as extensive testing under those as under Vista.)

    Hello, and thanks for answering.
    Yes, I have tried increasing the volume in control panel -> Realtek HD audio manager. No success.
    I have used a bunch of different drivers, both from toshiba's website and realtek's.
    Recently did a fresh XP install on another hard drive (don't have Vista install media), tried both 5.10.0.5869 and 5.10.0.6066 drivers (5.10.0.6066 is from march 13, 2010), sound still as low no matter what I do.
    Did the really desperate thing: bought a new (used) sound module on ebay ("Toshiba Portege R500 (PPR50E-00L048EN) USB jack" on ebay.co.uk), but it has the same problem as the original one.
    A hardware problem... well maybe, I was thinking perhaps the sound module doesn't get enough power from the motherboard, but since there is some sound (although very low), the USB jack on the module works, the headphone/mic jack detection works, and the diagnostics found in the Control Panel all say that the device is working OK, I don't think it's a hardware problem.
    I'm guessing there is a problem with the drivers initializing the sound to a ridiculously low setting, and increasing the volume level to 100 makes it go up to a level equal to perhaps 2 in a regular system. That should be solved by a fresh install, but it isn't.
    Perhaps the BIOS messes up the sound? But re-flashing the BIOS doesn't help...
    Anyone got any other ideas?
    I've googled and found people having problems with low sound volume on other laptops using the ALC262 chip, but no general solution.

Maybe you are looking for

  • ITunes, what have you done with my files?

    Irrelevant backstory; I've actually had quite a turbulent time with technology lately- External harddrives blowing up, iTouch screens cracking in my pocket. Not to mention the screen on this ruddy Mac of mine. But I'm fairly competent with technology

  • CALL_FUNCTION_CONFLICT_LENG

    Hi gurus, I got short dump CALL_FUNCTION_CONFLICT_LENG . could you please suggest me how to rectify this problem? Please find the below runtime error details. Runtime Error     CALL_FUNCTION_CONFLICT_LENG Exception     CX_SY_DYN_CALL_ILLEGAL_TYPE    

  • Inbound Invoice idoc segment feilds mapping to SAP feilds

    Hi, Could you please help me to find out the tables and feilds in SAP for the inbound invoice idoc type INVOIC01. I need to map the idoc segment fields with SAP fields and respective tables. Thanks in Advance Satish

  • About  reports distibution in 10g reports.

    Hi, I have to generate multiple reports in to multiple formats(html,pdf,printer). Do I have to create mutilple distributions files(dest1.xml,dest2.xml..etc)?. I developed these reports in 10g(paper layout). Is it possible to get an example?

  • 5 second delay  when using server name instead of ip in JNLP codebase??

    Hello, can anyone think of why, in my jnlp file when I have codebase="http://www.mysite/..." my rmi app has an additional delay of 5 seconds when making RMI calls? If I replace www.mysite with 64.29.187.xxx (i.e the ip used to access the server form