I've blocked anonymous but it doesn't work for all: unavailable, no name, etc

It appears this question has been asked numerous times, but there is no response from Verizon. What's the deal here? I don't want to call Verizon because when I do, I'm inundated with calls from them, which I'm trying to decrease not increase. Honestly, Verizon reminds me of an ex who takes a break up badly, and I don't want to encourage continued calls, but I need to know how to stop this.

mgsee wrote:
It appears this question has been asked numerous times, but there is no response from Verizon. What's the deal here? I don't want to call Verizon because when I do, I'm inundated with calls from them, which I'm trying to decrease not increase. Honestly, Verizon reminds me of an ex who takes a break up badly, and I don't want to encourage continued calls, but I need to know how to stop this.
It does work. The problem is that anonymous call rejection doesn't do what you want it to do! ACR blocks calls from people who withhold their telephone number by entering the ACR code on their phone. "Unavailable" and "no name" callers have not used the ACR code to block their telephone number, so the call comes through. It's a loophole in the regulation and there is no way for the consumer to get around it.
If you feel motivated enough, a letter to the FCC or your congressman asking them to fix the loophole is your best recourse.

Similar Messages

My iMessage read receipts are turned on but it doesn't work for all my contacts

I have iMessage read receipts turned on on my iPhone 5. Several of my contacts also have it turned on. They can see when I read their messages but it's not showing up on my end. Someone explain to me how this is happening and how I can fix it. I have SEVERAL contacts who can see my read receipts but I can't see theirs. It has to be something on my end but I don't see how!
Thank you.

It makes things easier if you reply on your original thread rather than starting a new one - you should see a 'reply' button at the bottom of each post.
How did the photos get onto your iPad e.g. were they copied to the iPad from your computer ? If not then you should be able to delete them directly in the Photos app on your iPad. If they were copied from your computer then they are removed from the iPad using the same process as you used to put them onto the iPad :
Connect the iPad to your computer and select it on the left-hand sidebar (if you are using iTunes 11 on your PC then control-s should get the sidebar to show) :
On the right-hand side of the iTunes screen select the Photos tab :
If you just want to remove some folders/albums that you had copied from your computer then de-select them on the list :
If you want to remove all photos that you had copied to your iPad from your computer then select and sync a folder that doesn't have any photos in it :

HT5622 The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings no

The Game Center used to work with my Apple ID before I updated to iOS 7.4, I used to play multiple player with EA Real Racing 3 game but it doesn't work at all and every time I tried to go to the Game Center it's just blank, even to the settings nothing!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Game Center and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Q10 I turn Camera Flash On but it Doesn't work IN ALL MODES

Q10 I turn Camera Flash On but it Doesn't work IN ALL MODES

I know, especially stupid that it doesn't work in stabilisation mode as its often that mode used in lower light situations that would benefit from the flash... have no idea why BB doesn't allow US to chose when we want a certain function.

"Move Current Track Automation Data to Region" doesn't work for all

I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
Any ideas about this, or workarounds?

OK, well an update on this in case anyone's interested.
With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

I bought a game plants vs zombies but it doesn't work at all!

I downloaded 2 of these i paid but it doesn't work one is just photos and the other one open a blak window an music and stops there! How can I solve the problem??

I don't know what the two games/apps are, but if they are freezing, then try closing them completely : from the home screen (i.e.not with either of the two apps 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If neither of the above work then contact the developer as Julian suggests

Creativ Cloud for Teams doesn´t work for all members

Why do the products work for all members except oe? The test version is started here.

Hi YES-2013,
Welcome to the Community!
The Team subscription is fine and everyone should be able to use a full version of the software's, ask him to uninstall & re-install the Adobe Creative cloud desktop application and if that doesn't work then contact our Adobe support via http://www.adobe.com/support/download-install/supportinfo/ and they will help him further.
-Ankit

How do you save data into an excel file while myRIO is acquiring data? I tried saving it using "Write to file" but it doesn't work for some reason.

I am acquiring cosine wave and a pulse wave as input and I want to store their peak to peak values into an excel file. "Write to File" is not working for it. Is there any other vi which can be used for data logging?
Thank you for your help.

Hi Ssheoran,
Can you provide more detail when you say that the Write to File VI doesn't work? Is there an error given? Or can you just not find the file on your computer? Keep in mind using this file in a Real-Time VI on the myRIO will save files on the myRIO. You will then have to transfer to your PC. Please view the following video as a guide for saving files and transferring them to your computer: (http://www.youtube.com/watch?v=BuREWnD6Eno). Hope this helps.
Best Regards,
Roel F.
Applications Engineer
National Instruments

Spelling again | Multilingual doesn't work for all languages

Hello,
I am writing e-mails on a daily basis in different languages (English, German, Spanisch, Russian, and French).
And, of course, I have set my Mail spelling checker to <Multilingual>. It works just fine with the first three languages. But it “doesn't know” the french words. Neither checks it the russian words at all...
If I turn <Francais> on, then it works, but the other languages don't (of course).
Have you guys an idea???
Thanks!
PowerBook G4 12 Mac OS X (10.4.2)

And, of course, I have set my Mail spelling checker
to <Multilingual>. It works just fine with the first
three languages. But it “doesn't know” the french
words.
Seems like it should know French. Is French on your list in system prefs/international/languages? If not, use the Edit button to add it.
Neither checks it the russian words at all...
OS X has never come with a Russian spell checker.
Some other info of possible use:
http://m10lmac.blogspot.com/2007/01/spell-checking-in-other-languages.html

Exported UTI doesn't work for all account

Hello,
We have a QuickTime component that permits to play files with our video codec. These files also have a specific extension.
It works fine with QuickTime 7 that allows "anything" content type. But on Snow Leopard, with QuickTime 10, we can not open file with our private extension. When we open QuickTime, our files are in grey and we can not click on it.
What I've done is to export an UTI from my application info.plist file. This export says that my UTI with the right filename extension is conform to "public.movie". I have done it from the original admin account of the machine.
What is strange, is that this modification has an impact on the others accounts I have created (standard or admin) but not on this original admin account.
I mean, on the others accounts, the files with our extension are well seen as movie file and can be played with QuickTime Player. So the Uniform Type I export is well interpreted when I log with a different account.
I do not understand what is wrong with this original account. The behavior is also the same if I am loged as root.
I have made a repair disk permissions but it didn't change anything.
Right now I don't know what to do in order to have this export to work for this particular account...
Thanks in advance for your help,
Loïc

Use Quicktime 7 on the Snow Leopard Computers to playback this video. On the Snow Leopard computer quicktime 7 should be in the Utility folder. If not download Quicktime 7 for Snow Leopard:
http://support.apple.com/kb/DL92
If some reason you can't download Quicktime 7 here how you can install it from the Snow Leopard installation disc:
http://support.apple.com/kb/ht3678#1
Scroll to the top of the page for instruction on how to install Qt 7.
Quicktime X can't playback all video formats/codecs. It's limited to a few so use Qt 7.

Flash Player doesn't work for all accounts

I am having a problem like others as described in this topic:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1262196&enterthread=y
Namely, Flash Player works fine for my main administrative
account, but does not work for my other accounts (I am running
Windows XP Home Edition). As suggested in the above topic, I have
tried uninstalling Flash (for all users) then re-installing it.
This did not help. The above topic also suggests that my registry
may be corrupted and referenced the following technical article for
a solution.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fb1634cb
That article instructs you to use a Microsoft download called
SubInACL to repair the registry. However, the article specifically
states "Note: Do not run the Microsoft SubInACL tool on Windows XP
Home. This tool should only be used with Windows XP Pro". So it
will not help me since I'm running XP Home Edition.
Is there any solution to the corrupted registry problem if
you're running XP HomeEdition?

I had the same problem none of that works...
This is what I did:
Using the adm profile, go to the windows folder, find the
regedit icon, open it, then scroll all the way down until you find
the shockwave files. Right click on each and the click on
permissions, give each user persmission and do it for all the
shockwave flash floders you see, it should be about 9.
good luck.
need help call me 305 228 7574, EST until 10pm.

How do I go back to the last version in the 9 series? I need my Norton toolbar, but it doesn't work with FF10. I tried the forcing, but that doesn't work. All my logons are stored in Norton.

Windows 7 ultimate edition, Dell Studio XPS PC.
I used Norton utilities, and store all my logons and passwords int he identity safe. With Foxfire 10, my identity safe has disappeared. I tried the routine of forcing add-ons to work and it still doesn't.

Norton generally releases an update within a few hours of a new Firefox version and they did so yesterday
*http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-10-Support-for-Norton-Toolbar/td-p/648241
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

My new iPhone 5S will not ring for incoming calls. It vibrates. I've tried suggested tips for iPhone 4 but it doesn't work for 5S. Please help!!

Can anyone help. My new iPhone 5S does not ring for incoming calls. It vibrates. How can I get ringer to work?

Hello lyngos,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS2802
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
Best of luck,
Mario

How to exclude entire subnet from proxy? Used to be X.Y.0.0/16 long time ago but it doesn't work for a longest time and I really need it now.

How to create group or subnet proxy exclusions in Mozilla Firefox 29? Used to be in shape of
X.Y.Z.0/8 or X.Y.0.0/16 or X.0.0.0/24
but that is a no go since version 4...

I don't think that anything has changed about how to specify the no proxy settings.
*http://kb.mozillazine.org/network.proxy.no_proxies_on

I've blocked anonymous but it doesn't work for all: unavailable, no name, etc

Similar Messages

Maybe you are looking for