I've forgotten the end of my ePrint email address, i.e. the part that comes after the @ sign. Help!

I've forgotten the end of my ePrint email address, i.e. the part that comes after the @ sign. Help!

Hi,
Shoule be @hpeprint.com
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How do I change the name that shows up for my email account . I don't want to change the email address, just my personal name that shows who the email is from.

    Hi There
    My apple account was in my partners name , I have now changed it to my name .
    The problem is my icloud email still shows up his name at the beginning of my email address. eg Jo Blogg ( [email protected] ) .
    When I open up Icloud in browser it shows in the top right my correct name , but when I go into Account settings on Mac in the Mail it shows up my
    partners name as the Full Name associated with the account . It doesn't give you the option of changing that name though.
    I hope I have explained this properly and someone can help ?
    Cheers
    Lizzeee

    Hey There I didn't need to change it as it shows my correct name in my icloud account. The problem is on my Mac where it still shows my Full name as my partners name.
    For eg. if I send an email from "Mail" on mac and I use my icloud account then the name that shows up is my partners name when the email is received. If I send an email from the Icloud Mail box that I log into on my browser then the name that shows up when the email is received is my name which is correct.
    When I go into preferences in "Mail" on my Mac to change my name, the name is ghosted out and doesn't allow me to change it ! ? It is here that it still show my partners name ?

  • How can I change the iCloud setting to my email address. I can't log out of the previous owners email I'd without his password

    I have my sons old iPhone. iCloud is still under his email address. I can't close it and re start without his password. If I put his password in I am worried it will delete all his backup.  Any suggestions?

    Not completely clear on what you are trying to do, but I will take a shot.
    1.  If you do not want to continue using your son's account on the old phone, factory reset it and set it up with your Apple ID.  It will be like you have a new phone.
    1.  To prevent a problem with your son's backup, connect the newly-reset phone to the computer and cancel the sync immediately.  Rename the old iPhone immediately and you will not have to worry about messing up your son's backup.
    I hope this helps.

  • My blood pressure must be up to a dangerous level. Whenever I try to log in to itunes they give me a very old email address. I did retrieve the password and made it the same as my usual email address but apple keeps insisting that the password is wrong  f

    Itunes does not accept my password anymore since upgrading phone. They give me my very old email address. I retrieved that account and changed password accordingly. Apple said it was changed correctly, but itunes will not accept it.Please help

    They give me my very old email address.
    How old  it is  does not  matter IF  thats what Apple have as your  user ID and if  Apple have advised  you its OK and it is not... then you need to deal with support  where  ID information is causing problems.

  • Reset printer config back to default, want to reuse ePrint email address

    Hello,
    I have an HP LaserJet 200 ColorMFP 276nw that I had associated to an ePrint email address.  I forgot what I set the Admin password to, so I had to reset the printer to default settings (turned printer off, pressed and held on the lower-left part of the touch screen, turned printer on until it read "Permanent storage init.").
    Once that was done, I re-installed web services and added ePrint back to the printer.  Now I'm trying to use the same ePrint address that the printer had before, and I keep getting told that the address is already taken.
    Is there a way to keep that address, or do I have to use a new one?
    Thanks,
    Michael

    Hello Michael,
    Thank you for joining the HP Support community.  I understand that you had to reset your Laserjet 200 and during the process lost your ePrint email address.
    That ePrint email address will not become available again, you will need to use/create a new one. I'm sorry if this has caused any inconvenience.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How can I re-use my ePrint email address after deleting and re-adding ENVY 110 print services?

    I recently had to delete and re-add my ENVY 110 series printer (D411c) to ePrint in an attempt  to solve a Web Services connectivity problem, and now I cannot re-use my original ePrint email address.  Is there a way to reset the address or am I stuck with a new one?

    You are stuck with the new one.  The old one will be released for use after 6 months.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • What does the eprint email address end in?

    what does the eprint email address end in?

    Hi,
    It should end in @hpeprint.com
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Does anyone know if the HDMI to DVI Adapter that comes in the Mac Mini box is DVI end male or female?

    Does anyone know if the HDMI to DVI Adapter that comes in the Mac Mini box is DVI end male or female? Should I be getting a male to male DVI cable, or will this one work out of the box? Thanks!!

    Looking at mine - the DVI end is female.

  • I have had to semi-reset and reinstall my hp6500a plus. How do I keep the same eprint email address?

    I have had a network blowup and a new computer and was told to do a semi-reset and full install on my Inkjet hp6500a plus. How do I keep the same eprint email address which I have given out to a number of people? When I did the install I seem to have been re-assigned a new @hpprint address and can't find how to change it back.

    Hi,
    I affraid you will not be able to use the same address.
    Due to security reasons any removed ePrint address (due to Web Services removal, product reset or product replacement) is blocked for any user for 6 months period.
    You may select a difference customized address by following the steps below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940150&cc=us&dlc=en&lc=en
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Lightning to 30 pin adapter with a lightning end is the same size as the cable that comes with the phone?

    Has anyone found a lightning to 30 pin adapter where the lightning end is the same size as the cable that comes with the phone?  I know there have been some non-apple versions, but I can't tell if they are the same as the Apple versions where the lightnin end is slightly bigger than the cabe that ships with the phone.  Most iPhone bumpers only accomodate the original charing cabe ad the adapter cable is just slighter bigger and doesnt fit.  Also, i'm not referring to the square, cable-less adapter.

    Depending on your caes I shaped mine carefully with a craft knife seems all the case manufacturers designed the cases for lightning cables but seemed blind to the adapter and it's likely use
    Have you not seen the Apple adapter with .2m cable between the  plugs
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=3a
    will do what you want ,I use one in exactly same scenario

  • HT201363 Can u share my the link to send rescued email address for forgotten security questions.

    Can u share me the link to send rescued email address for my forgotten security questions.

    Go to https://expresslane.apple.com ; select 'More Products and Services', then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple ID security questions' and click 'Continue'.

  • Can't pull a clip onto the end of my timeline ... (1st time on iMovie) One of the clips has an orange highlight on it. Is this causing the problem?

    Can't pull a clip onto the end of my timeline ... (1st time on iMovie) One of the clips has an orange highlight on it. Is this causing the problem?

    Ahhh, now I see the problem, Grasshopper.  Problem is, we are all Grasshoppers, here.
    Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
    If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
    No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline.  And, of course, when they were "track 1" and "track 2", you could.
    An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor.  Click the "reveal button" for Compositing: Opacity (bottom, right).  Once open, there is a "fade handle" to the right top.  Drag it left for however much fade you wish.  (there is one on the left as well, but you were only talking about a fade-out.)
    A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio.  Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing.

  • I am having problem when i am updating my iphone 4 to ios 5 ..it get update n took 50 minutes then at the end when it was processing file ...suddenly an error comes that an unknown error accurred {9006}..please help me..how will i update my iphone 4

    i am having problem when i am updating my iphone 4 to ios 5 ..it get update n took 50 minutes then at the end when it was processing file ...suddenly an error comes that an unknown error accurred {9006}..please help me..how will i update my iphone 4

    Error 9006: Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.

  • What is the criteria for a "valid eprint email address"

    Criteria for a vaid eprint email address

    Dossr,
    Welcome to the HP Forum!
    The custome eprint address must be connected to an actual ePrint account and printer.
    The address shall be in the form of  [email protected]
    Examples: 
    [email protected]
    [email protected]
    The following explains and tells you how to set up your custom email address for your ePrint:
    Eprint – Help and Tips – Getting Started
    When the page opens:
    Getting Started »
    Getting Started with ePrintCenter >>Select:  What is a custom email and how do I set it up?
    Dragon Tip
    Be sure you also set up a restricted list of users that are allowed to send to your ePrint email address.  If you do not do this, your printer may be e-spammed!
    Eprint – Help and Tips – Getting Started >>  
    HP ePrint >>
    Click on Managing ePrint Security >>  Select How can I restrict who uses ePrint on my printer?
    Good Luck!
    Click the Kudos Star! 
    It is a great “Thank You” for the Author's efforts.
    Kind Regards,
    Dragon-Fur

  • I forgot my eprint email address that I set up. How can I find it?

    I recently set up a new eprint account and established an eprint email address so I can print on my HP eprinter.  I have forgotten the eprint email address, how can I find it?
    This question was solved.
    View Solution.

    on your pc that is connecter to your wireless or wired network , type "eprintcenter.com" and you will see the setup menu to the printer , then look at the address in the eprint tab.  hope this helps

Maybe you are looking for